Saeed Zahedi

发表

Characterisation of dynamic couplings at lower limb residuum/socket interface using 3D motion capture.

Dan L. Bader, Jinghua Tang, Michael McGrath, 2015, Medical engineering & physics.

Dataset for Tri-axial pressure and shear (TRIPS) sensor system for stump/socket interface

Dan L. Bader, Piotr Laszczak, Liudi Jiang, 2015 .

Systematic Review of Studies Examining Transtibial Prosthetic Socket Pressures with Changes in Device Alignment

Siamak Noroozi, Philip Davenport, Saeed Zahedi, 2017, Journal of Medical and Biological Engineering.

Inertia Properties of a Prosthetic Knee Mechanism

Saeed Zahedi, Mohammed I. Awad, Abbas Dehghani, 2015, TAROS.

Comparison of two static calibration methods of an inertial measurement unit

Saeed Zahedi, David Moser, Mohammed I. Awad, 2010, BioMed 2010.

Estimation of actuation system parameters for lower limb prostheses

O. M. Querin, David Moser, Saeed Zahedi, 2016, 2016 11th France-Japan & 9th Europe-Asia Congress on Mechatronics (MECATRONICS) /17th International Conference on Research and Education in Mechatronics (REM).

A Novel secure protocol, IES, for Mobile Voting

Saeed Zahedi, Reza Ebrahimi Atani, Somayeh Izadi, 2012 .

Adaptive prosthesis - a new concept in prosthetic knee control

Saeed Zahedi, Stephen Lang, Andrew Sykes, 2005, Robotica.

Dataset for Development of a residuum/socket interface simulator for lower limb prosthetics

Dan L. Bader, Jinghua Tang, Piotr Laszczak, 2017 .

Effects of clinical interventions and everyday activities on the dynamic loading at the lower limb stump/socket interface

Dan L. Bader, Piotr Laszczak, Liudi Jiang, 2015 .

Motor electrical damping for back-drivable prosthetic knee

David Moser, Saeed Zahedi, Abbas A. Dehghani-Sanij, 2016, 2016 11th France-Japan & 9th Europe-Asia Congress on Mechatronics (MECATRONICS) /17th International Conference on Research and Education in Mechatronics (REM).

PERFORMANCE OF AN ACTIVITY MONITOR INTEGRATED INTO A MICROPROCESSOR KNEE

Piotr Laszczak, Saeed Zahedi, Michael Mcgrath, 2018 .

Use of gait lab 3D motion capture for dynamic assessment of amputee socket interface biomechanics – a preliminary study

Dan L. Bader, Liudi Jiang, Saeed Zahedi, 2015 .

Use of gait lab 3D motion capture for dynamic assessment of amputee socket interface biomechanics with validation using TRIPS sensors systems – a case study

Dan L. Bader, Piotr Laszczak, Liudi Jiang, 2015 .

Assessing trans-femoral residuum/socket interface coupling using 3D motion capture – effect of terrains and walking speeds

Dan L. Bader, Nicholas Hale, Piotr Laszczak, 2016 .

A lower-limb stump/socket interface simulator to aid assessment of clinical interventions

Dan L. Bader, Piotr Laszczak, Liudi Jiang, 2015 .

Investigation into the effect of liner choice on interface stresses using a stump/socket simulator

Dan L. Bader, Piotr Laszczak, Saeed Zahedi, 2015 .

Performance of optimised prosthetic ankle designs

Martin Twiste, David Howard, Saeed Zahedi, .

Triaxial accelerometer static calibration

Saeed Zahedi, Mohammed I. Awad, Abbas Dehghani, 2011 .

A powered prosthetic knee joint inspired from musculoskeletal system

Saeed Zahedi, Siamak Najarian, David Moser, 2013 .