Yoshiaki Kakino

发表

In-situ measurement of grinding wheel surface topography (2nd report) : Cutting edges under various dressing conditions

Toshiki Hirogaki, Atsushi Matsubara, Yoshiaki Kakino, 1999 .

SERVO PERFORMANCE ENHANCEMENT OF HIGH SPEED FEED DRIVES BY DAMPING CONTROL

Atsushi Matsubara, Yoshiaki Kakino, Yasumi Watanabe, 2000 .

Enhancement of Feed Drive Dynamics of NC Machine Tools by Actively Controlled Sliding Guideway

Soichi Ibaraki, Atsushi Matsubara, Yoshiaki Kakino, 2004 .

In-situ measurement of grinding wheel surface topography. (1st Report) : Development of measuring system using laser stylus

Toshiki Hirogaki, Atsushi Matsubara, Yoshiaki Kakino, 1997 .

The Influence of Guide Mechanism to the Circular Interpolation Contouring Error at Quadrant Changing Position in NC Machine Tools.

Atsushi Matsubara, Yoshiaki Kakino, Jun Fujita, 2002 .

511 Optimization of Slot End-Milling Process by Fixed Cycle Analysis for Die/Mold Machining

Tomonori Sato, Yoshiaki Kakino, Iwao Yamaji, 2002 .

Study on Thermal Deformations of Machine Tools (4th Report)

Yoshiaki Kakino, Keiji Okushima, 1974 .

A Numerical Optimization Approach to Frequency-Domain Loop-Shaping Design of a Fixed-Structure Controller (Design of an Anti-Vibration Filter for a Feed Drive System)

Soichi Ibaraki, Takuya Tanaka, Atsushi Matsubara, 2004 .

Research on Spindle and Machining Process Monitoring for Intelligent Machine Tools(Advanced machine tool)

Soichi Ibaraki, Yoshiaki Kakino, Ahmed A. D. Sarhan, 2005 .

High Speed And High Productive Drilling ByIntelligent Machine Tools

Yoshiaki Kakino, Y. Kakino, 1970 .

Mill-turning by using multi-tasking machine (lathe with milling spindle)-The method of high speed dry turning-

Yoshiaki Kakino, Toshiyuki Muraki, Daisuke Murakami, 2003 .

MONITORING OF CUTTING FORCE USING SPINDLE DISPLACEMENT SENSOR

Soichi Ibaraki, Atsushi Matsubara, Yoshiaki Kakino, 2004 .

Thermal Deformations of Precision Instruments : In Conection with Machine Tools(Minor Special Issue on Precision)

Yoshiaki Kakino, Keiji Okushima, 1972 .

An Analysis of Methods used in Minimising Thermal Deformations of Machine Tools

Yoshiaki Kakino, Keiji Okushima, 1976 .

In-process detection of grinding crack by the use of acoustic emissions

Yoshiaki Kakino, Hiroshi Eda, Kozo Kishi, 1985 .

Development of Straight Cup Wheel to Prevent Grinding Seizure for Grinding Center

Atsushi Matsubara, Yoshiaki Kakino, Heisaburo Nakagawa, 1995 .

Monitoring Method of Cutting Force by Using Additional Spindle Sensors

Soichi Ibaraki, Atsushi Matsubara, Yoshiaki Kakino, 2006 .

Diagnosis And Compensation Of Motion Errors In NC Machine ToolsBy Arbitrary Shape Contouring Error Measurement

Yoshiaki Kakino, K. Lee, J. Braasch, 1970 .

On the Monitoring of Cutting Forces in End Milling Processes

Soichi Ibaraki, Atsushi Matsubara, Yoshiaki Kakino, 2004 .

Measurement Measurement of Error motions on on Five-axis Machine Tools by Ball Ball Bar Tests

Soichi Ibaraki, Yoshiaki Kakino, Takayuki Akai, 2012 .

Analysis of the motion accuracy of 5-axis controlled machining centers using DBB method

Yoshiaki Kakino, Yukitoshi Ihara, Zainal Abidin Ahmad, 1998 .

GROUPING PARTS AND MACHINE TOOLS AND PLANNING LAYOUT TO MINIMIZE PRODUCTION COST IN A JOB SHOP

Yoshiaki Kakino, Keiji Okushima, Kensuke Takano, 1976 .

Monitoring of Machining Process by Using Spindle Displacement Sensors

Atsushi Matsubara, Yoshiaki Kakino, Iwao Yamaji, 2004 .

A Study on the Improvement of Motion Accuracy of Hexapod type Parallel Mechanism Machine Tool(1st Report). The method of Kinematic Calibration without Gravitation Deformation.

Yoshiaki Kakino, Yukitoshi Ihara, Tetsuya Matsushita, 2001 .

Basic study of ball end milling on hardened steel

Toshiki Hirogaki, Yoshiaki Kakino, Yoshihiro Kita, 2001 .

A Study on End-milling of die/mold with Constant Cutting Force by Feed Rate and Spindle Speed Control

Yoshiaki Kakino, Heisaburo Nakagawa, Kazuya Fujimoto, 2007 .

A study on the temperature control of machine tools. (5th report). Heat flow analysis in the spindle head.

Yoshiaki Kakino, Junji Chigira, 1989 .

The Influence of Inertia Force and Viscous Friction on Contouring Errors in Circular Interpolation

Atsushi Matsubara, Yoshiaki Kakino, Minoru Hamamura, 2003 .

Measurement of Motion Accuracy and Improvement of Machining Accuracy on Ultra-high Precision NC Machine Tools by Using Cross Grid Encoder Test.

Yoshiaki Kakino, Yukitoshi Ihara, Minoru Hamamura, 1996 .

A study on the friction torque variation of a ball screw at motion direction change-Relationship among friction torque variation of a bail screw at motion direction change of contouring error-

Atsushi Matsubara, Yoshiaki Kakino, Minoru Hamamura, 2003 .

A Performance Evaluation of Preload Switching Spindle.

Yoshiaki Kakino, Nakamura Shinya, 1994 .

Study on the Measuring Method of Straight Motion Error of Machine Tools

Yoshiaki Kakino, Makoto Yasui, M. Yasui, 1982 .

An Analysis on Influence of Motor Heat Generation and Effect of Shaft-bore Cooling for Motor Integrated Spindle.

Yoshiaki Kakino, Shinya Nakamura, Akira Muramatsu, 1994 .

Study on the Generating Process of Machined Surface

Yoshiaki Kakino, Keiji Okushima, 1968 .

A Study on End Milling of Hardened Steel(2nd Report). Control for Constant Cutting Forces in Corner Profile End Milling Including Transitional Sections of Tool Paths.

Toshiki Hirogaki, Atsushi Matsubara, Yoshiaki Kakino, 2001 .

A Study on the Motion Accuracy of NC Machine Tools (7th Report) : The Measurement of Motion Accuracy of 5 Axis Machine by DBB Test

Yoshiaki Kakino, Yukitoshi Ihara, Hisashi Otsubo, 1994 .

An Analysis and a Performance Evaluation of the Under-Race Lubrication Spindle at a High Speed Rotation.

Yoshiaki Kakino, Shinya Nakamura, Koichi Urano, 1994 .

Study on the Thermal Deformations of Machine Tools (2nd Report)

Yoshiaki Kakino, Keiji Okushima, Toshihiko Kikuchi, 1972 .

The Influence of the Torsional Vibration of Ballscrew on the Stability of NC Servo Drive System.

Atsushi Matsubara, Yoshiaki Kakino, Minoru Hamamura, 1999 .

In-situ heat treatment system for die steels using YAG laser with a machining center

Toshiki Hirogaki, Yoshiaki Kakino, Heisaburo Nakagawa, 2001 .

Theoretical Analysis of Circular Interpolation Contouring Error at Quadrant Changing Position in NC Machine Tools

Atsushi Matsubara, Yoshiaki Kakino, Minoru Hamamura, 2001 .

High Precision Machining with Multi-flute End-mill tool on 5-Axis Controlled Machining Center. Achievement of Constant Cutting Force in Side milling by Controlling Axial Depth of Cut.

Toshiki Hirogaki, Yoshiaki Kakino, Iwao Yamaji, 2003 .

Development of a High Precision Machining Center and its Motion Accuracy

Yoshiaki Kakino, Yoshiaki Kakino, Hisashi Otsubo, 2009, Int. J. Autom. Technol..

A Study on the Motion Accuracy of NC Machine Tools (2nd Report)

Yoshiaki Kakino, Yukitoshi Ihara, Yoshio Nakatsu, 1986 .

A Study on End-milling of Hardened Steels. Comparison of SKD11 and SKD61.

Toshiki Hirogaki, Yoshiaki Kakino, Heisaburo Nakagawa, 2001 .

Compensation of 3-dimensional coordinate measuring machine and evaluation of double ball bar test by error vector analysis.

Yoshiaki Kakino, Yukitoshi Ihara, Toru Ise, 1985 .

Study on a Deviation Detection Type On-the-machine Measurement of Machined profile.

Yoshio Iwata, Yoshiaki Kakino, Hisashi Otsubo, 1992 .

Improvement of Motion Accuracy on Multi-task Machines

Yoshiaki Kakino, Toshiyuki Muraki, Koichi Tsunei, 2003 .

JS 033 THE IMPROVEMENT OF PRODUCTIVITY AND QUALITY OF DIE / MOLD BY CONSTANT FEEDRATE CONTROL AT THE CUTTING

Soichi Ibaraki, Atsushi Matsubara, Yoshiaki Kakino, 2004 .

A Study of Compensation of Thermal Displacement of the Ball Screw in NC Machine Tools

Yoshiaki Kakino, Yasuo Kimoto, Akemi Higashimoto, 1988 .

Analysis of the Mechanism of Orthogonal Machining by the Finite Element Method

Yoshiaki Kakino, Y. Kakino, 1971 .

A Study on Endmilling of Hardened Steel. (1st Report). Simplified Prediction Model for Cutting Forces and Control for Constant Cutting Foces Using this Model.

Toshiki Hirogaki, Yoshiaki Kakino, Heisaburo Nakagawa, 2000 .

Study on Amendable Machining System by Using Machining and Measuring Center (1st Report)

Atsushi Matsubara, Yoshiaki Kakino, Yukitoshi Ihara, 1993 .

A Study on the Total Tuning of Feed Drive Systems in NC Machine Tools (1st Report)

Atsushi Matsubara, Yoshiaki Kakino, Daisuke Ueda, 1994 .

A Study on the Servo-stability of the Tandem Driven Machine with Linear Motors

Yoshiaki Kakino, Yasusuke Iwashita, Naoto Sonoda, 2007 .

In-situ Suitable Controlled Scan of Laser Stylus for Point Measuring of Free Surface

Toshiki Hirogaki, Yoshiaki Kakino, Heisaburo Nakagawa, 2003 .

A study on the motion accuracy of NC machine tools. (4th report). Compensating for decreasing error of the circle radius during circular interpolation motion.

Yoshiaki Kakino, Yukitoshi Ihara, Yoshio Nakatsu, 1988 .