G. A. Khoury

发表

Part 9: Shrinkage for service and accident conditions

Ulrich Schneider, Alain Millard, Jean-Marc Franssen, 2000 .

Strain of heated concrete during two thermal cycles. Part 2: strain during first cooling and subsequent thermal cycle

G. A. Khoury, 2006 .

Passive tire protection of concrete structures

G. A. Khoury, G. Khoury, 2008 .

Material and environmental factors influencing the compressive strength of unsealed cement paste and concrete at high temperatures

G. A. Khoury, R. Sarshar, G. Khoury, 1993 .

Strain of heated concrete during two thermal cycles. Part 1: strain over two cycles, during first heating and at subsequent constant temperature

G. A. Khoury, G. Khoury, 2006 .

RILEM Recommendations: Part 4: Tensile strength for service and accident conditions

Ulrich Schneider, Alain Millard, Jean-Marc Franssen, 2000 .

Concrete spalling assessment methodologies and polypropylene fibre toxicity analysis in tunnel fires

G. A. Khoury, G. Khoury, 2008 .

Polypropylene fibres in heated concrete. Part 1: Molecular structure and materials behaviour

G. A. Khoury, B. Willoughby, G. Khoury, 2008 .

Polypropylene fibres in heated concrete. Part 2. Pressure relief mechanisms and modelling criteria

G. A. Khoury, G. Khoury, 2008 .

Passive protection against fire : Technical Focus - Fire Safety

G. A. Khoury, 2002 .

An approach for modelling concrete spalling in finite strains

G. A. Khoury, G. Mazzucco, V. A. Salomoni, 2010, Math. Comput. Simul..

Basic creep of unsealed hardened cement paste at temperatures between 20°C and 725°C

G. A. Khoury, Wps Dias, P. J. E. Sullivan, 1987 .

Strain of heated concrete during two thermal cycles. Part 3: isolation of strain components and strain model development

G. A. Khoury, 2006 .

The performance of concrete structures

G. A. Khoury, C. G. Bailey, 2011 .

Mechanical Properties of Hardened Cement Paste Exposed to Temperatures up to 700 C (1292 F)

G. A. Khoury, Wps Dias, P. J. E. Sullivan, 1990 .

Deformation of concrete and cement paste loaded at constant temperatures from 140 to 724°C

G. A. Khoury, P. J. E. Sullivan, W. Ps. Dias, 1986 .

Compressive strength for service and accident conditions

Ulrich Schneider, Alain Millard, Jean-Marc Franssen, 1995 .

Recommendation of RILEM TC 200-HTC: Mechanical concrete properties at high temperatures-modelling and applications : Part I. General presentation

Ulrich Schneider, Alain Millard, Jean-Marc Franssen, 2007 .

Micro-structural modelling of concrete under fire conditions

G. A. Khoury, Valentina Salomoni, Carmelo Maiorana, 2007 .

Stress-strain experimental-based modeling of concrete under high temperature conditions

G. A. Khoury, Valentina Salomoni, Carmelo E. Majorana, 2007 .