Har Prashad

发表

An analysis of axial deflection of double‐decker high‐precision bearings vis‐à‐vis conventional ball bearings

Har Prashad, 2006 .

Energy efficient bearings: An investigation©

Har Prashad, 2003 .

Diagnosis of Rolling-Element Bearings Failure by Localized Electrical Current Between Track Surfaces of Races and Rolling-Elements

Har Prashad, H. Prashad, 2002 .

Theoretical Evaluation of Reduction in the Life of Hydrodynamic Journal Bearings Operating Under the Influence of Different Levels of Shaft Voltages

Har Prashad, 1991 .

A New Generation Double Decker High Precision Rolling Element Bearing — Concept, Development and Investigations

Har Prashad, 2001 .

Theoretical Analysis of Capacitive Effect of Roller Bearings on Repeated Starts and Stops of a Machine Operating Under the Influence of Shaft Voltages

Har Prashad, 1992 .

Appearance of craters on track surface of rolling element bearings by spark erosion

Har Prashad, H. Prashad, 2001 .

Theoretical Evaluation of Capacitance, Capacitive Reactance, Resistance and Their Effects on Performance of Hydrodynamic Journal Bearings

Har Prashad, 1991 .

Variation and recovery of resistivity of industrial greases — an experimental investigation

Har Prashad, 1998 .

Investigations of corrugated pattern on the surfaces of roller bearings operated under the influence of electrical fields

Har Prashad, H. Prashad, 1988 .

A study of electrical pitting of journal bearings with water‐contaminated lubricant

Har Prashad, 2000 .

Tribology in Electrical Environments

Har Prashad, 2005 .

Determination of Time Span for the Appearance of Flutes on the Track Surface of Rolling-Element Bearings Under the Influence of Electric Current

Har Prashad, 1998 .

Evaluation of Dynamic Coefficients of a Two-Lobe Journal Bearing Using an Electrical Analogy Approach

Har Prashad, 1996 .

Behavior of greases in statically-bounded conditions and when used in non-insulated antifriction bearings under the influence of electrical fields

Har Prashad, T. S. R. Murthy, 1988 .

Determination of magnetic flux density on the surfaces of rolling-element bearings as an indication of the current that has passed through them—an investigation

Har Prashad, H. Prashad, 1999 .

Experimental evaluation of the stress distribution on the outer surface of the outer race of conventional and double‐decker high‐precision bearings

Har Prashad, 2003 .

Diagnostic monitoring of rolling-element bearings by high-frequency resonance technique©

Har Prashad, Malay Ghosh, Siddhartha Biswas, 1985 .

Diagnosis of bearing problem of synchronous condenser—an experimental and theoretical investigation

Har Prashad, 1995 .

Relative comparison of stiffness and damping properties of double decker high precision and conventional rolling-element bearings

Har Prashad, 2002 .

Theoretical Analysis of the Effects of Instantaneous Charge Leakage on Roller Tracks of Roller Bearings Lubricated With High Resistivity Lubricants Under the Influence of Electric Current

Har Prashad, 1990 .

Analysis of the effects of an electric current on contact temperature, contact stresses and slip band initiation on the roller tracks of roller bearings

Har Prashad, 1989 .

Effect of operating parameters on the threshold voltages and impedance response of non-insulated rolling element bearings under the action of electrical currents

Har Prashad, H. Prashad, 1987 .

Theoretical evaluation of impedance, capacitance and charge accumulation on roller bearings operated under electrical fields

Har Prashad, 1988 .

Diagnosis of Deterioration of Lithium Greases Used in Rolling-Element Bearings by X-ray Diffractrometry

Har Prashad, 1989 .

Diagnosis of failure of rolling-element bearings of alternators—a study

Har Prashad, 1996 .