Hiromichi Onikura

发表

Novel micro deep drilling using micro long flat drill with ultrasonic vibration

Muhammad Aziz, Osamu Ohnishi, Hiromichi Onikura, 2012 .

Fabrication of micro flat drills by precision grinding and drilling into duralumin and stainless steel with ultrasonic vibration

Osamu Ohnishi, Hiromichi Onikura, Akira Hata, 2004 .

Development of a High-Performance Deep-Hole Laser-Guided Boring Tool: Guiding Characteristics

Hiromichi Onikura, Akio Katsuki, Takao Sajima, 1997 .

Development of a deep-hole, laser-guide boring tool: the boring of workpieces with a thin wall and an inclined prebored hole

Kazuhiro Oda, Hiromichi Onikura, Akio Katsuki, 1994 .

Study on Skiving (1st Report)

Hiromichi Onikura, Keizo Sakuma, 1976 .

Development of a High-Performance Deep-Hole Boring Tool-Putting into practical use-

Hiromichi Onikura, Akio Katsuki, Dirk Thiele, 1999 .

Causal relation between ultrasonic vibration cutting and corrosion resistance

Osamu Ohnishi, Hiromichi Onikura, Takao Sajima, 2009 .

Development of an optical measurement system for five-degrees-of-freedom error motions of a micro high-speed spindle

Hiromichi Onikura, Hiroshi Murakami, Akio Katsuki, 2011 .

Development of a high-performance laser-guided deep-hole boring tool:: Optimal determination of reference origin for precise guiding

Hiromichi Onikura, Akio Katsuki, Takao Sajima, 2000 .

Development of a Laser-Guided Deep-Hole Internal-Grinding Tool - Preparatory Experiment and Its Production

Akira Mohri, Hiromichi Onikura, Akio Katsuki, 2003 .

Development of a laser-guided deep-hole evaluating probe: For 100 to 600 mm diameter hole

Hiromichi Onikura, Hiroshi Murakami, Akio Katsuki, 2007 .

Improvement of Hole Accuracy by Piloting Drills.

Hiromichi Onikura, Akio Katsuki, Toshikazu Kanda, 1992 .

Development of a practical high-performance laser-guided deep-hole boring tool: Improvement in guiding strategy

Hiromichi Onikura, Hiroshi Murakami, Akira Mohri, 2011 .

Fabrication of Micro Compound Tools and Their Application in Drilling

Muhammad Aziz, Osamu Ohnishi, Hiromichi Onikura, 2007 .

Effects of ultrasonic vibration on machining accuracy in microdrilling

Osamu Ohnishi, Hiromichi Onikura, Toshikazu Kanda, 1996 .

Development of a Deep-Hole Boring Tool Guided by Laser

T. Matsuo, Hiromichi Onikura, Akio Katsuki, 1992 .

112 Development of a Practical High-Performance Laser-Guided Deep-Hole Boring Tool : Performance Test Using A Rolling Proof Apparatus

Akira Mohri, Hiromichi Onikura, Akio Katsuki, 2001 .

H23 Investigation of Various Parameters to Realize a High Quality Machining with Micro Endmills

Osamu Ohnishi, Hiromichi Onikura, Toshiro Doi, 2011 .

Development of a laser-guided deep-hole measurement system with lower production cost

Hiromichi Onikura, Hiroshi Murakami, Akio Katsuki, 2010 .

The Influence of Tool Geometry on Axial Hole Deviation in Deep Drilling : Comparison of Single- and Multi-Edge Tools : Vibration, Control Engineering, Engineering for Industry

Hiromichi Onikura, Akio Katsuki, Keizo Sakuma, 1987 .

Advanced burr-free hole machining using newly developed micro compound tool

Muhammad Aziz, Osamu Ohnishi, Hiromichi Onikura, 2012 .

Development of a deep-hole laser-guided boring tool using piezoelectric translators

Hiromichi Onikura, Yoshiyuki Yamashita, Akio Katsuki, 1996 .

Fabrication of Electroplated Micro Grinding Wheels and Manufacturing of Microstructures with Ultrasonic Vibration

Osamu Ohnishi, Hiromichi Onikura, O. Ohnishi, 2003 .

Effects of Ultrasonic Vibration on Microdrilling into Inclined Surface

Osamu Ohnishi, Hiromichi Onikura, 2003 .

Analysis on vibration of drills - In drilling workpieces with prebored holes.

Hiromichi Onikura, Akio Katsuki, Keizo Sakuma, 1985 .

Fabrication of Micro Ni-W Electroplated Diamond Tools and Their Application to Grooving of Silicon

Osamu Ohnishi, Hiromichi Onikura, Weichen Kuo, 2007 .

Study on Skiving Process : Surface Accuracy

Hiromichi Onikura, Keizo Sakuma, Shunji Harada, 1978 .

Development of a system for measuring micro hole accuracy using an optical fiber probe

Eiji Kondo, Hiromichi Onikura, Akio Katsuki, 2010 .

Development of an Optical Hole-Diameter Measuring Instrument: Optical Analysis, Fundamental Experiment, Trial Manufacture and Performance Test

Hiromichi Onikura, Akio Katsuki, Takao Sajima, 1995 .

Development of micro-diamond tools through electroless composite plating and investigation into micro-machining characteristics

Osamu Ohnishi, Hiromichi Onikura, O. Ohnishi, 2010 .

Drilling Mechanisms in Ultrasonic-Vibration Assisted Microdrilling.

Osamu Ohnishi, Hiromichi Onikura, 1998 .

Innovative micro hole machining with minimum burr formation by the use of newly developed micro compound tool

Muhammad Aziz, Osamu Ohnishi, Hiromichi Onikura, 2012 .

An Optical Fiber Probe for 3-D Micro Metrology

Eiji Kondo, Hiromichi Onikura, Akio Katsuki, 2010 .

Development of an Optical Hole-Diameter Measuring Instrument

Hiromichi Onikura, Akio Katsuki, Takao Sajima, 1994 .

Study on Skiving Process : Cutting Force and Workpiece Deflection

Hiromichi Onikura, Keizo Sakuma, 1979 .