Jörg Riccius

发表

Laser-Heating for Thermo-Mechanical Fatigue Simulation

Andreas Gernoth, Jörg Riccius, Elena Suslova, 2008 .

The Unified Specific Impulse – A Selection Criterion For Green Propellants?

Jörg Riccius, Wissam Bouajila, J. Riccius, 2011 .

Heat Accumulators for Cryogenic In-Space Propulsion

Jörg Riccius, Oskar Haidn, Johannes Leiner, 2011 .

Thermo-mechanical fatigue simulation at the TMF test facility at DLR Lampoldshausen

Andreas Gernoth, Jörg Riccius, Ludwig Brummer, 2008 .

STRUCTURAL ANALYSIS OF THE CYCLIC LOADING OF REGENERATIVELY COOLED COMBUSTION CHAMBER WALLS USING 2D AND 3D FINITE ELEMENT MODELS

Jörg Riccius, Evgeny Zametaev, Oskar Haidn, 2006 .

TMF tests: Optical heating, thermography and deformation measurement of combustion chamber wall structures

Stefan Schlechtriem, Andreas Gernoth, Jörg Riccius, 2011 .

A short introduction into selected material and component testing capabilities at the DLR Institute of Space Propulsion

Andreas Gernoth, Jörg Riccius, Helmut Ciezki, 2013 .

ANALYSIS OF THE WELDING OF ARIANE 5 NOZZLE EXTENSION TUBES WITH A GENERAL PURPOSE FINITE ELEMENT PROGRAM

Jörg Riccius, Evgeny Zametaev, Oskar Haidn, 2005 .

Suggestion for the Unified Specific Impulse as an Alternative Selection Criterion for Green Propellants

Jörg Riccius, Wissam Bouajila, 2012 .

TMF: Laser Application for a Close-to-Reality Simulation of Thermo-Mechanical Fatigue Processes in Rocket Engines

Andreas Gernoth, Jörg Riccius, Elena Suslova, 2007 .

Comparison of damage parameter based Finite Element fatigue life analysis results to combustion chamber type TMF panel test results

Stefanie Reese, Jörg Riccius, Evgeny Zametaev, 2015 .

Identification of the Unified Chaboche Constitutive Model's Parameters for a Cost Efficient Copper-Based Alloy

Jörg Riccius, Wissam Bouajila, 2014 .

Suggestion for a unified performance assessment criterion of spacecraft propellants

Jörg Riccius, Wissam Bouajila, 2010 .

A short view on material and component testing capabilities at DLR Institute of Space Propulsion

Andreas Gernoth, Jörg Riccius, Helmut Ciezki, 2013 .

An updated Roadmap for Hybrid Propulsion in Europe

Jörg Riccius, S. Soller, A. Cretella, 2012 .

Experimental Investigation of Phase-Change Behavior in a Water-Ice Heat Accumulator Setup for Cryogenic Application

Jörg Riccius, Johannes Leiner, 2012 .

Development of Technologies for a CMC-based Combustion Chamber

Jörg Riccius, Oskar Haidn, Dmitry Suslov, 2009 .

Structural Mechanics Issues in Engine Design

Jörg Riccius, 2013 .

DETERMINATION OF LINEAR AND NONLINEAR PARAMETERS OF COMBUSTION CHAMBER WALL MATERIALS

Jörg Riccius, Oskar Haidn, O. Haidn, 2003 .

Material damage induced by environment and temperature and identification process

Jörg Riccius, Patrice Jouinot, Vladimir Gantchenko, 2004 .

Comparison of 2d and 3d Structural FE-Analyses of LRE Combustion Chamber Walls

Jörg Riccius, Evgeny Zametaev, Oskar Haidn, 2006 .