Shahrokh Shahpar

发表

Multi-disciplinary optimisation of a compressor rotor subjected to ice impact

Vassili Toropov, Ralf Schlaps, Shahrokh Shahpar, 2017 .

Turbomachinery Active Subspace Performance Maps

Geoffrey T. Parks, Michael Adams, Shahrokh Shahpar, 2017 .

Automatic Optimisation of Pre-Swirl Nozzle Design

John W. Chew, Shahrokh Shahpar, Fabio Ciampoli, 2006 .

Zipper Layer Method

Yibin Wang, Shahrokh Shahpar, Greg Carnie, 2011, IMR.

Aerodynamic Optimization of High-Pressure Turbines for Lean-Burn Combustion System

Shahrokh Shahpar, Stefano Caloni, S. Shahpar, 2013 .

An Aeroacoustic Investigation of a Tiltwing eVTOL Concept Aircraft

George N. Barakos, Shahrokh Shahpar, Indi Tristanto, 2020 .

Innovative Turbine Stator Well Design Using a Kriging Assisted Optimization Method

Shahrokh Shahpar, Harvey Thompson, Vincenzo Fico, 2017 .

Fan Blade Tip Aerodynamics With Realistic Operational Casing Geometries and Clearances

Shahrokh Shahpar, Ning Qin, Alistair John, 2017 .

PADRAM: Parametric Design and Rapid Meshing System for Turbomachinery Optimisation

Leigh Lapworth, Shahrokh Shahpar, L. Lapworth, 2003 .

Turbomachinery Design Optimization Using Automatic Differentiated Adjoint Code

Shahrokh Shahpar, Michael B. Giles, Mihai C. Duta, 2007 .

Design Optimization Under Uncertainty Using the Multipoint Approximation Method

Vassili Toropov, Shahrokh Shahpar, Yury Korolev, 2017 .

Towards Automatic Blocking of Shapes using Evolutionary Algorithm

Yi Su, Chi-Keong Goh, Tianyou Zhang, 2020, Comput. Aided Des..

Parametric Bird Strike Study of a Transonic Rotor Using Isogeometric Analysis

Chiara Bisagni, Shahrokh Shahpar, Sam Duckitt, 2016 .

Zipper layer method for linking two dissimilar structured meshes

Yibin Wang, Shahrokh Shahpar, Greg Carnie, 2013, J. Comput. Phys..

Buffer Layer Method for Linking Two Non-Matching Multi-block Structured Grids

Ning Qin, Shahrokh Shahpar, Greg Carnie, 2009 .

Multidisciplinary Design Optimisation Research Contributions from the AMEDEO Marie Curie Initial Training Network

Daniel Baumgärtner, Robert Hewson, Roeland De Breuker, 2016 .

A Comparative Study of Optimisation Methods for Aerodynamic Design of Turbomachinery Blades

Shahrokh Shahpar, 2000 .

Optimal multi-block mesh generation for CFD

Paul G. Tucker, Shahrokh Shahpar, Rob Watson, 2017 .

Non-Axisymmetric Turbine End Wall Design: Part I — Three-Dimensional Linear Design System

David Gregory-Smith, Shahrokh Shahpar, Martin G. Rose, 1999 .

Sequential feature‐based mesh movement and adjoint error‐based mesh refinement

Ning Qin, Shahrokh Shahpar, David Radford, 2020, International Journal for Numerical Methods in Fluids.

Automatic Design Optimization of Profiled Endwalls Including Real Geometrical Effects to Minimize Turbine Secondary Flows

Shahrokh Shahpar, Stefano Caloni, Laurens de Prieëlle, 2017 .

SOPHY: AN INTEGRATED CFD BASED AUTOMATIC DESIGN OPTIMISATION SYSTEM

Shahrokh Shahpar, 2005 .

Efficient Adjoint-Based Mesh Adaptation Applied to Turbo-Machinery Flows

Ning Qin, Shahrokh Shahpar, David Radford, 2018 .

ALLEVIATION OF SHOCK-WAVE EFFECTS ON A HIGHLY LOADED AXIAL COMPRESSOR THROUGH NOVEL BLADE SHAPING

Shahrokh Shahpar, Ning Qin, Alistair John, 2017 .

Mesh Morphing for Turbomachinery Applications Using Radial Basis Functions

Shahrokh Shahpar, Ismail Bello, 2018, IMR.

Turbomachinery Active Subspace Performance Maps

Geoffrey T. Parks, Michael Adams, Shahrokh Shahpar, 2018 .

Toward Affordable Uncertainty Quantification for Industrial Problems: Part II — Turbomachinery Application

Shahrokh Shahpar, Tiziano Ghisu, 2017 .

Efficient Genetic Algoritm Based Robust Design Method for Compressor Fan Blades

Andy J. Keane, Prasanth B. Nair, Shahrokh Shahpar, 2005, DAC 2005.

Design Optimization of Casing Grooves Using Zipper Layer Meshing

Ning Qin, Shahrokh Shahpar, Greg Carnie, 2014 .

Turbomachine with casing grooves

Yibin Wang, Shahrokh Shahpar, Gregory Carnie, 2011 .

DESIGN OF GAS TURBINE ENGINES USING CFD

Leigh Lapworth, Shahrokh Shahpar, L. Lapworth, 2004 .

(Re-) Meshing using interpolative mapping and control point optimization

Shahrokh Shahpar, Ron Bates, Ivan Voutchkov, 2018, J. Comput. Des. Eng..

AFFORDABLE UNCERTAINTY QUANTIFICATION FOR INDUSTRIAL PROBLEMS: APPLICATION TO AERO-ENGINE FANS

Shahrokh Shahpar, Tiziano Ghisu, T. Ghisu, 2018 .

High Fidelity Multi-stage Design Optimisation of Multi-stage Turbine blades using a Mid-range Approximate Method (MAM)

Shahrokh Shahpar, S. Shahpar, 2010 .

Large-scale CFD Optimization based on the FFD Parametrization using the Multipoint Approximation Method in an HPC Environment

Vassili Toropov, Shahrokh Shahpar, Yury Korolev, 2015 .

Automatic Optimization of Preswirl Nozzle Design

John W. Chew, Shahrokh Shahpar, Fabio Ciampoli, 2007 .

Automatic Blocking of Shapes Using Evolutionary Algorithm

Yi Su, Chi-Keong Goh, Tianyou Zhang, 2018, IMR.

Probabilistic Performance Analysis of Eroded Compressor Blades

Andy J. Keane, Prasanth B. Nair, Shahrokh Shahpar, 2005 .

Toward Affordable Uncertainty Quantification for Industrial Problems: Part I — Theory and Validation

Shahrokh Shahpar, Tiziano Ghisu, T. Ghisu, 2017 .

Supporting multi-point fan design with dimension reduction

Shahrokh Shahpar, Pranay Seshadri, Geoffrey Parks, 2019, The Aeronautical Journal.

Towards robust design of axial compressors with uncertainty quantification

Shahrokh Shahpar, Pranay Seshadri, Geoffrey T. Parks, 2013 .

High Pressure Turbine Stage Endwall Profile Optimisation for Performance and Rim Seal Effectiveness

John W. Chew, Nicholas J. Hills, Timothy Scanlon, 2009 .

A Combined Medial Object and Frame Approach to Compute Mesh Singularity Lines (Research note)

Cecil Armstrong, Shahrokh Shahpar, Trevor T. Robinson, 2018 .

Efficient preprocessing of complex geometries for CFD simulations

Paul G. Tucker, Shahrokh Shahpar, Zaib Ali, 2019 .

Robust Design of Compressor Blades Against Manufacturing Variations

Andy J. Keane, Prasanth B. Nair, Shahrokh Shahpar, 2006, DAC 2006.

Multi-Disciplinary Design Optimisation of the Cooled Squealer Tip for High Pressure Turbines

Vassili Toropov, Shahrokh Shahpar, Stefano Caloni, 2018 .

Numerical Analysis of an Instrumented Turbine Blade Cascade

Paul G. Tucker, Shahrokh Shahpar, Rob Watson, 2018, Journal of Turbomachinery.

PADRAM: Parametric Design and Rapid Meshing System for Complex Turbomachinery Configurations

Shahrokh Shahpar, Andrea Milli, S. Shahpar, 2012 .

Full-Parametric Design System to Improve the Stage Efficiency of a High-Fidelity HP Turbine Configuration

Shahrokh Shahpar, Andrea Milli, 2008 .

Robust Design of Compressor Fan Blades Against Erosion

Andy J. Keane, Prasanth B. Nair, Shahrokh Shahpar, 2006 .

Multiobjective evolutionary optimization of a compressor stage using a grid-enabled environment

Daisuke Sasaki, Andy J. Keane, Shahrokh Shahpar, 2006 .

Robust Design of a Transonic Axial Compressor Blade Using a Hybrid Optimization-Uncertainty Quantification Approach

Shahrokh Shahpar, Pranay Seshadri, Geoff T. Parks, 2013 .

Uncertainty Quantification, Rare Events, and Mission Optimization: Stochastic Variations of Metal Temperature During a Transient

Nicholas J. Hills, Francesco Montomoli, Dario Amirante, 2014 .

Robust design using Bayesian Monte Carlo

Andy J. Keane, Prasanth B. Nair, Shahrokh Shahpar, 2008 .

Investigation Into Coupling Techniques for a High Pressure Turbine Blade Tip

Shahrokh Shahpar, Stefano Caloni, 2015 .

Design Optimisation of Casing Grooves Using the Zipper Layer Meshing Method

Ning Qin, Shahrokh Shahpar, Greg Carnie, 2011 .

Numerical investigations of different tip designs for shroudless turbine blades

Shahrokh Shahpar, John D. Coull, Stefano Caloni, 2015 .

Multi-Objective Design and Optimisation of Bypass Outlet-Guide Vanes

Leigh Lapworth, Shahrokh Shahpar, David Giacche, 2003 .

Automatic Design Optimisation of Profiled Endwalls Including Real Geometrical Effects to Minimize Turbine Secondary Flows

Shahrokh Shahpar, Stefano Caloni, Laurens de Prieëlle, 2014 .

Large Scale Optimization of Transonic Axial Compressor Rotor Blades

Vassili Toropov, Shahrokh Shahpar, Andrey Polynkin, 2008 .

Nonaxisymmetric Turbine End Wall Design: Part I— Three-Dimensional Linear Design System

David Gregory-Smith, Shahrokh Shahpar, Martin G. Rose, 2000 .

Combined Hessian and Adjoint Error-Based Anisotropic Mesh Adaptation for Turbomachinery Flows

Shahrokh Shahpar, Ning Qin, Guglielmo Vivarelli, 2017 .

Leakage Uncertainties in Compressors: The Case of Rotor 37

Geoffrey T. Parks, Shahrokh Shahpar, Pranay Seshadri, 2015 .

Using Autoencoders and Output Consolidation to Improve Machine Learning Models for Turbomachinery Applications

Timoleon Kipouros, Shahrokh Shahpar, Richard Ahlfeld, 2021, Volume 2D: Turbomachinery — Multidisciplinary Design Approaches, Optimization, and Uncertainty Quantification; Radial Turbomachinery Aerodynamics; Unsteady Flows in Turbomachinery.

Global Optimisation of a Transonic Fan Blade Through AI-Enabled Active Subspaces

Shahrokh Shahpar, Tiziano Ghisu, Diego I. Lopez, 2021, Volume 2A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics.

Gradient-enhanced Least-square Polynomial Chaos Expansions for Uncertainty Quantification and Robust Optimization

Shahrokh Shahpar, Pranay Seshadri, Tiziano Ghisu, 2021, AIAA AVIATION 2021 FORUM.

Low-Noise Blade Design Optimization for a Transonic Fan Using Adjoint-Based MDO Approach

Shahrokh Shahpar, Alexander G. Wilson, A. G. Wilson, 2021, AIAA AVIATION 2021 FORUM.

Anisotropic adjoint sensitivity-based mesh movement for industrial applications

Ning Qin, Shahrokh Shahpar, David Radford, 2021 .

A computational fluid dynamic acoustic investigation of a tiltwing eVTOL concept aircraft

George N. Barakos, Shahrokh Shahpar, Indi Tristanto, 2021 .

Comparative Analysis of Methodologies for Uncertainty Propagation and Quantification

Alberto Traverso, Shahrokh Shahpar, Alessandra Cuneo, 2017 .

Robust Compressor Blades for Desensitizing Operational Tip Clearance Variations

Geoffrey T. Parks, Shahrokh Shahpar, Pranay Seshadri, 2014 .

Engineering design optimisation using tabu search

P. John Clarkson, Shahrokh Shahpar, Andy M. Connor, 2000 .

Adaptive and parallel capabilities in the Multipoint Approximation Method

Vassili Toropov, Shahrokh Shahpar, Andrey Polynkin, 2008 .

Multi-Disciplinary Analyses for the Design of a High Pressure Turbine Blade Tip

Shahrokh Shahpar, Stefano Caloni, 2016 .

Block Topology Generation for Structured Multi-block Meshing with Hierarchical Geometry Handling☆

James Tyacke, Paul G. Tucker, Shahrokh Shahpar, 2016 .

Optimal mesh topology generation for CFD

Paul G. Tucker, Shahrokh Shahpar, Zaib Ali, 2017 .

Aerodynamic Optimisation of High Pressure Turbines for Lean-Burn Combustion System

Shahrokh Shahpar, Stefano Caloni, 2012 .

Multi-fidelity design optimisation of a transonic compressor rotor

Andy J. Keane, Alexander I. J. Forrester, Shahrokh Shahpar, 2011 .