Syuhei Kurokawa

发表

1111 Camera Based Automatic Stylus Tracking During Gear Profile Measurement

Md. Hazrat Ali, Syuhei Kurokawa, Kensuke Uesugi, 2013 .

Generation Behavior of Surface Defects and Optimization of Bending Process in Hot Bending Process of Stepped Plate: ― Study on Forming Process for Large Forged Crank Throw ―@@@―大型鍛鋼クランクスローの成形工程に関する研究―

Syuhei Kurokawa, Takefumi Arikawa, Syohei Horie, 2016 .

S112042 Development of the Micro Rotary Encoder for Precision Measurement of a Micro Gear : Continuous Signal Detection of the Grating Disk of 500μm in Diameter

Yoji Umezaki, Syuhei Kurokawa, Yoji Matsukawa, 2013 .

S1660103 Suggestion and processing properties of the innovative CMP/P-CVM combined processing method : Breakthrough to the high efficiency processing of wide gap crystal materials

Syuhei Kurokawa, Tsutomu Yamazaki, Yasuhisa Sano, 2014 .

Whole outline scanning measurement of internal gear by using CNC gear measuring machine

Terutake Hayashi, Syuhei Kurokawa, Tetsuya Taguchi, 2019 .

Transient Phenomenon of Chip Generation and Its Movement in Hobbing : 4th Report, The Relationship Between the Jamming of Chips on the Finished Surface and the Chip Form in Generating in Flytool Simulation Tests(Machine Elements and Manufacturing)

Yoji Umezaki, Yasutsune Ariura, Syuhei Kurokawa, 2007 .

Modeling and simulation of multi-materials for additive manufacturing

Md. Hazrat Ali, Syuhei Kurokawa, Gaziz Yerbolat, 2020 .

In-process Tool Flank Wear Detection by Using Changes in the Tool-Work Electrical Contact Resistance

Osamu Ohnishi, Syuhei Kurokawa, Mitsuaki Murata, 2013 .

Camera based precision measurement in improving measurement accuracy

Md. Hazrat Ali, Syuhei Kurokawa, Kensuke Uesugi, 2014 .

Machinability of SMART Forged Materials in Intermittent Cutting

Syuhei Kurokawa, Makoto Hino, Mitsuaki Murata, 2018 .

Characteristics of Thermo-Electromotive Force, Electric Current and Electric Resistance in Intermittent Cutting Process by Face Milling

Michio Uneda, Osamu Ohnishi, Syuhei Kurokawa, 2011 .

Measurement of Tooth Pair Deflections With Ultra High Resolution Encoders and Prediction of Transmission Error Under Load in High Precision

Yasutsune Ariura, Syuhei Kurokawa, 2007 .

H02 Tooth flank topography measurement of small module gear : Nondestructive measurement using dental impression material

Syuhei Kurokawa, Yasutaka Yano, 2006 .

104 Spatial Location Finding of Sound Source Using Handy Microphone Array System Based on SSP-MUSIC Method

Michio Uneda, Syuhei Kurokawa, Toshiro Doi, 2011 .

0513 In-process Tool Wear Detection of Square End mill Based on DC Two Terminal Method

Syuhei Kurokawa, Takao Sajima, Tetsuya Torii, 2015 .

Development of a grating disk of a microrotary encoder for measurement of meshing accuracy of microgears

Yasutsune Ariura, Syuhei Kurokawa, 2010 .

Control strategy of developed mechanical actuator in measuring hole surface parameter

Md. Hazrat Ali, Syuhei Kurokawa, Hiroshi Murakami, 2013 .

312 Estimation of the progress of tool flank wear by the change of tool-work contact resistance in face milling

Michio Uneda, Osamu Ohnishi, Syuhei Kurokawa, 2012 .

Brief history and progress of gears (3rd report)

Yoji Umezaki, Syuhei Kurokawa, Yoji Matsukawa, 2009 .

H23 Proposal of Cu-CMP process by controlled atmosphere polishing machine

Yoji Umezaki, Syuhei Kurokawa, Yoji Matsukawa, 2009 .

Micro radial grating disk manufactured by nanoimprinting technique for transmission error measurement of micro gears

Morihisa Hoga, Osamu Ohnishi, Syuhei Kurokawa, 2011 .

Development of Novel Groove Patterns for CMP Pad

Michio Uneda, Osamu Ohnishi, Syuhei Kurokawa, 2012 .

Study of 3D probe calibration method for the gear measuring machine with coordinate measuring function.

Syuhei Kurokawa, Takashi Teraoka, Tetsuya Taguchi, 2016 .

Validity of quantifying sensation of fishing reel using transmission error instead of sensory human evaluation for face gear design

Syuhei Kurokawa, Tetsuo Inoue, 2019 .

3328 In-process Tool Flank Wear Detection in Intermittent Cutting Process by Face Milling

Michio Uneda, Osamu Ohnishi, Syuhei Kurokawa, 2011 .

Design of Mechanical Actuator in 3D CAD Software

Syuhei Kurokawa, Akio Katsuki, Takao Sajima, 2013 .

Real-time evaluation of tool flank wear by in-process contact resistance measurement in face milling

Michio Uneda, Osamu Ohnishi, Syuhei Kurokawa, 2012 .

606 Precision measurement of tooth deflection and calculation of transmission error under high loads for spur gears

Yasutsune Ariura, Syuhei Kurokawa, Hideki Okamoto, 2005 .

Influence of Wafer Edge Profile on STI-CMP Process Performance : Examination Based on Surface Pressure of Wafer Calculated by FEM Analysis(Machine Elements, Design and Manufacturing)

Akira Fukuda, Osamu Ohnishi, Syuhei Kurokawa, 2010 .

Prototype of a grating disk of 500 μm in diameter using nanoimprint technique to evaluate the micro gear engagement

Yoji Umezaki, Syuhei Kurokawa, Yoji Matsukawa, 2013 .

Influence of Flange Thickness on Quench Crack in Polymer Quenching Process for Large Forged Product: ― Study of Polymer Quenching for Large Forged Product ―@@@―大型鍛鋼品のポリマー焼入れに関する研究―

Keisuke Okita, Syuhei Kurokawa, Takefumi Arikawa, 2016 .

Quantitative Evaluation of Slurry Flow Behavior Using Digital Image Processing

Michio Uneda, Ken-ichi Ishikawa, Osamu Ohnishi, 2011 .

Influence of deterioration of polymer solution on quenching crack in polymer quenching process for large forged products

Keisuke Okita, Syuhei Kurokawa, Takefumi Arikawa, 2016 .

Evaluation of shot peened surfaces using characterization technique of three-dimensional surface topography

Yasutsune Ariura, Syuhei Kurokawa, 2005 .

Evaluation of gear engagement accuracy by Transmission Error with sub-microradian resolution

Yasutsune Ariura, Syuhei Kurokawa, Yoji Matsukawa, 2009 .

Topography measurement of gear tooth flanks with CMM and evaluation of pitch deviations with the new definition

Syuhei Kurokawa, S. Kurokawa, 2006 .

Transmission errors of cylindrical gears under load - Influence of tooth profile modification and tooth deflection

Yasutsune Ariura, Syuhei Kurokawa, Masaru Ohtahara, 1996 .

Development of mechanical actuator for deep-hole measurement system

Syuhei Kurokawa, Akio Katsuki, Takao Sajima, 2012, ICRA 2012.

Relation between ingot segregation part of large forged product and quenching crack

Syuhei Kurokawa, Syuhei Kurokawa, Takefumi Arikawa, 2016 .

In-process tool wear detection by using tool-work contact resistance change for intermittent cutting process in face milling

Osamu Ohnishi, Syuhei Kurokawa, Toshiro Doi, 2013 .