Kang

发表

Comparison of Electrical Characteristic of Photovoltaic module under partial shading and module with damaged bypasses diode

Song, Suk-Whan, Ko, 2017 .

Working liquid pressure and its control in hydraulic drawing processes of cups

Liu, Li, Yan, 2001 .

Parametric study on of green residential the performance buildings in China

Wang, Jian, Xi, 2015 .

Experimental Study on the Mix Design Method using the Fracture Energy and the other Parameters in Concrete.

Kang, Sung-Hoo, 1992 .

Momoent Redistribution of 2-Span Beams with 2400 MPa Greased Sheathed Tendons

Yang, Cho, Kang, 2017 .

High frequency noise optimization CAE process and validation with commercial vehicle

Park, Kang, Kim, 2016 .

Buffeting Analysis for the Aerodynamic Stability of a Marine Concrete Cable-stayed Bridge during Construction

Chang, Yang, Kang, 2015 .

Constructability and Economic Evaluation of Continuous Hoop Reinforcement Method

Jin, Su-min, Park, 2013 .

Simulation and Design of Multi-modulars Detector System of Gadolinium-Loaded Liquid Scintillator

Hou, Wang, Yu, 2012 .

High Voltage Pulse Power and the Technics for the Capacitor Power-Storage Type

Li, Wang, Jun, 2004 .

Towed line array sonar platform noise suppression based on spatial matrix filtering technology

Jian, Dong, Li, 2013 .

A supercritical CO 2 fluid technique for the preparation and evaluation of rhBMP-2-loaded PLLA microspheres

Wu, Yin, Jiang, 2009 .

Hydraulic and Thermal Analysis of ITER Standard NB Blanket Module

Wu, Xu, Fu, 2006 .

Monitoring in Building Road Tunnel Across Coal Measures

Zhang, Kang, Ye, 2005 .

RSOA-basRSOA-based distributed access long reach hybrid WDM-TDM PON with OADMs

Yang, Deming, Qian, 2010 .

Shear Strength of Insulated Concrete Sandwich Wall Panels by Using Different Types of Insulation

Yun, You, Song, 2012 .

Study on Vitalizing Port Operation at Ulsan Port： Focused on Main Port of Ulsan

Won, Kwak, Nam, 2014 .

Effects of the Damaged Axial-flow Compressor Blade on the Gas Turbine Components

Kang, W. N. Yun, K. Y. Kim, 2007 .

Consideration of Shape Characteristics for Apartments Incorporating Daylight and Energy Performance

Kang, Lee, Ji-Eun, 2013 .

An Analytical Study for Investigation of Residual Strength of Fire Damaged Reinforced Concrete Walls having Different Wall Thicknesses and Fire Exposure Time Periods

Shin, Min, Kang, 2015 .

Ultrasonic guided wave inspection with array sensors

Song, To, Kang, 2010 .

Three Dimensional Acoustical Imaging Based on Isosurface Technique for Bulk Material

He, Dong, Kang, 2013 .

Effect of Electron Beam Irradiation on the Fire Retardant Penetration into Wood

Jong, Won, Son, 2014 .

Superconducting Magnet of the Gyrotron for HL-2A ECRH System

Zhang, Jun, Mei, 2005 .

Seismic Force Test on Precast Concrete Beam-Column Connection Using Pure Dry Cast Method

Kang, Thomas H.-K., Lee, 2013 .

The Analysis and Calculation on ECRH Anode Circuit on the HL-2A Tokamak

Li, Wang, Zhou, 2006 .

Design of Novel Compact Electromagnetic Bandgap Structures with Enhanced Bandwidth

Ping, Jiang, Xie, 2010 .

WISE-based Core Technology Development for Custom Agricultural and Forest Meteorological Services

Kang, J. Y. Choi, J. Kim, 2015 .

Control of LHCD on the HL-2A Tokamak

Li, Wang, Bo, 2004 .

The Introduction to the ECRH System of the HL-2A Tokamak

Li, Wang, Zhou, 2004 .

Compact Terahertz Wave Collimator Design with Photonic Crystal Slabs

Ping, Wan, Wu, 2011 .

Electroluminescence Gray Scale Display Driving Method and Circuit

Li, Yang, Xin, 2007 .

Progress of Nondestructive Detection Technology on Remanufacturing Coatings

Wang, Xu, Kang, 2012 .

Simplification of the Flexural Capacity of SFR-UHPCC Rectangular Beam

Wu, Kang, Kim, 2006 .

Effects of Reflectors and Receivers on the Thermal Performance of Dish-Type Solar Power Systems

Ma, Kim, Kang, 2007 .

Parametric Analysis of High-Strength Reinforced Concrete Beams at High Temperature

Choi, Kang, Ji Yeon, 2004 .

The Design of the TZ-2 High Voltage Modulator

Li, Wang, Zhihui, 2006 .

Model-based optimization of phased array ultrasonic testing

Jing, Song, Kang, 2010 .

A Study of Half-Precast Building Systems with Post-Tensioning Method

Yoon, Kang, Thomas H.-K., 2013 .

Application of Online Equipment for Measuring U and Pu Concentration in 1AP During the Bench Experiment of Reprocessing

Chen, You, Song, 2010 .

Hydraulic and Thermal Calculation and Analysis of ITER Shield Block Module

Wu, Xu, Fu, 2005 .

Material and interface engineering for high-performance light-emitting diodes.

Liu, Jingdong Luo, Kang, 2005 .

Operation Status of 320 kV Multi-discipline Research Platform for Highly Charged Ions in 2011

Li, Ma, Wang, 2011 .

POST-BUCKLING ANALYSIS OF PRESTRESSED CONCRETE BEAM-COLUMNS BY THE DISPLACEMENT CONTROL STRATEGY

Kang, Young-Jin, 1989 .

A Study on the Compressive Strength of Precast Concrete Using Recycled Aggregate Concrete

Lee, Kang, Kim, 2011 .

Structural Performance Evaluation of SFRC Using Recycled Coarse Aggregates

Kang, Kim, Yoon-Keun Kwak, 2016 .

UHPC Field Application and FEM Analysis with Karama3D

Park, Kang, Hong, 2016 .

Study on Tat Mediated Having Composite Magnetic Nanoparticles Targeting Function

Jie, Jin, Peng, 2005 .

ITER Shield Blanket Design Activities at SWIP

Chen, Wu, Fu, 2003 .

Domain Analysis on the Field of Electrical & Electronic Engineering by Network Analysis

Kang, Kim, Seo, 2015 .

Development of Super-Synchronization Speed Control Assembly in Two 80 MVA Motor Generators of HL-2A Tokamak

Wang, Huang, Liu, 2005 .

An 8-GSa/s 8-bit ADC System

Kang, Cornish, Tani, 1997, Symposium 1997 on VLSI Circuits.

Hot top electromagnetic casting research of Al thin slab

Jin, Zhang, Tian, 1999 .

ATTITUDE CONTROL SYSTEM FOR A HIGH SPEED CATAMARAN WITH HYDROFOILS IN WAVES

Kang, Hong, S-Y, 1993 .

Optimization of a High Speed Spinning Disk Spindle System for Minimum RRO , NRRO, and Lightweight by Using G.A.

Kim, Kang, Yoon, 2002 .

The Design of TZ-2 High Voltage Pulse Modulator

Li, Wang, Bo, 2005 .

Design of Anode HVPS of ECRH on HL-2A Tokamak

Li, Wang, Bo, 2005 .

Strain Rate-Based Performance of Concrete Material

Kang, Hong, Thomas H.-K., 2015 .

6 - 17 Operation Status of 320 kV Platform for Multi- discipline Research with Highly Charged Ions

Li, Liu, Wang, 2012 .

Energy Efficiency Classification for Agricultural Heater

Kang, Kim, Jiwon, 2012 .

Direct measurement of the pseudoscalar decay constant, fDs.

Gao, Chen, Han, 1995, Physical review letters.

Partition of Unity for a Class of Nonlinear Parabolic Equation on Overlapping Non-Matching Grids

Huang, Kang, Deng, 2007 .

Creating Pathways in Subsurface of PFA/Aerosil Composite Membranes as a Way of Achieving Fluid Transport

Kang, Livingston, Gabriela, 2012 .

Measurement of the mass of the tau lepton.

Gao, Chen, Han, 1996, Physical review. D, Particles and fields.

Mortality of emergency abdominal surgery in high-, middle- and low-income countries

Dan, Thomson, Chun, 2016 .

Direct measurement of the Ds branching fraction to phi pi.

Gao, Chen, Han, 1995, Physical review. D, Particles and fields.

Effects of Storage Temperature on the Effective Activity of Straw Frozen Semen after Thawing

Ma, Qiao, Yao, 2015 .

Tam, Hwa Yaw and Wai, Ping-kong Alexander (2017) Mid-infrared octave-spanning supercontinuum and frequency comb generation in a suspended germanium-membrane

Zhe, Qiang, Wang, 2017 .

g-matrix based on configuration interaction and Stone's perturbation theory

Liu, Cao, Kang, 1999, Journal of magnetic resonance.

Effect of nitrogen addition on microstructure and erosion-corrosion behavior of stainless steel in acidic slurry

Bo, Jun, Cai, 2009 .

Rational Development of Structurally Ordered Platinum Ternary Intermetallic Electrocatalysts for Oxygen Reduction Reaction

Xia, Kang, Yao, 2019, Catalysts.

CCN 1 interlinks integrin and Hippo pathway to autoregulate tip cell 1 activity 2

Kang, Do Young Hyeon, T. Huh, 2022 .

Role of F-18 FDG PET/CT imaging in the diagnosis of paraneoplastic neurological syndromes

Hongwei, Kang, Xu, 2014 .

Degradation of Furfural by UV/O3 Technology

Ping, Kang, Chun-li, 2009 .

Search for a vector glueball by a scan of the J/ psi resonance.

Gao, Kong, Chen, 1996, Physical review. D, Particles and fields.

Experimental study on triaxial compressive creep model of simulative soil for deep-sea sediment

Kang, Wenbo, Qiuhua, 2014 .

Magnetic field simulation and harmonic analysis of CSNS/RCS quadrupole prototypes

Yang, Mei, Kang, 2015 .

TMRC 2016│Schedule at a glance

Kang, Xue, C. S. Bhatia, 2016 .

Gray Relational Analysis Optimization for Coalbed Methane Blocks in Complex Conditions Based on a Best Worst and Entropy Method

Zhao, Kang, Guo, 2019, Applied Sciences.

Research advances in eco-hydrological process and function

Qin, Kang, Yang, 2014 .

Simulation study on three casting processes for a marine propeller hub body

Li, Jie, Cao, 2013 .

The accuracy of magnetic resonance imaging and ultrasound in evaluating the size of early-stage breast neoplasms

Ma, Zheng, Kang, 2016 .

Sharing and evaluation of a new community co-management model for protecting Crested Ibis:a case study of Crested Ibis National Nature Reserve,China

Wang, Liu, Kang, 2010 .

Adsorption of Anionic Dyes onto Chitosan-modified Diatomite

Peng, Kang, Xue, 2011 .

The Role of SO3 Poisoning in CU/SSZ-13 NH3-SCR Catalysts

Shen, Hou, Yan, 2019, Catalysts.