X. Margot

发表

Methodology to estimate the threshold in-cylinder temperature for self-ignition of fuel during cold start of Diesel engines

Alberto Broatch, Santiago Ruiz, X. Margot, 2010 .

Numerical Modelling of Cavitation: Validation and Parametric Studies

Sergio Hoyas, X. Margot, A. Gil, 2012 .

Combustion noise analysis of partially premixed combustion concept using gasoline fuel in a 2-stroke engine

Ricardo Novella, Alberto Broatch, X. Margot, 2016 .

Combustion chamber resonances in direct injection automotive diesel engines: A numerical approach

Alberto Broatch, X. Margot, Antonio J. Torregrosa, 2004 .

Proceedings ILASS–Europe 2017. 28th Conference on Liquid Atomization and Spray Systems

X. Margot, Raul Payri, 2017 .

Impact of the injector design on the combustion noise of gasoline partially premixed combustion in a 2-stroke engine

Ricardo Novella, Alberto Broatch, X. Margot, 2017 .

Computational study of the sensitivity to ignition characteristics of the resonance in DI diesel engine combustion chambers

Alberto Broatch, X. Margot, A. Gil, 2007 .

Combination of CFD and Experimental Techniques to Investigate the Flow in Centrifugal Compressors Near the Surge Line

X. Margot, A. Tiseira, A. Gil, 2008 .

Understanding the unsteady pressure field inside combustion chambers of compression-ignited engines using a computational fluid dynamics approach

Antonio J. Torregrosa, Alberto Broatch, X. Margot, 2020 .

ANALYSIS OF THE CAVITATING FLOW IN REAL SIZE DIESEL INJECTORS WITH FIXED AND MOVING NEEDLE LIFT SIMULATIONS

X. Margot, P. Fajardo, S. Patouna, 2010 .

Optimization of the inlet air line of an automotive turbocharger

X. Margot, Luis Miguel García-Cuevas, A. Tiseira, 2013 .

A Methodology to Estimate the Swirl Number at TDC In DI Diesel Engines: Through the Combination of CFD and Steady Flow Rig Results

X. Margot, A. Gil, José V. Pastor, 2004 .

Experimental methodology for turbocompressor in-duct noise evaluation based on beamforming wave decomposition

Antonio J. Torregrosa, Alberto Broatch, X. Margot, 2016 .

THREE DIMENSIONAL CALCULATION OF THE FLOW IN A DI DIESEL ENGINE WITH VARIABLE SWIRL INTAKE PORTS

X. Margot, Jesús Benajes, José V. Pastor, 2001 .

Definition of wind blowers for vehicles testing at chassis-dyno facilities using a CFD approach

Alberto Broatch, X. Margot, A. Gil, 2017 .

A CFD APPROACH TO THE COMPUTATION OF THE ACOUSTIC RESPONSE OF EXHAUST MUFFLERS

Alberto Broatch, X. Margot, A. Gil, 2005 .

A CFD APPROACH TO DIESEL ENGINE COMBUSTION CHAMBER RESONANCE

Alberto Broatch, X. Margot, A. Gil, 2007 .

CFD modeling of the in-cylinder flow in direct-injection Diesel engines

X. Margot, A. Gil, Jesús Benajes, 2004 .

Sound quality assessment of Diesel combustion noise using in-cylinder pressure components

Alberto Broatch, X. Margot, Francisco Payri, 2009 .

Computational study on the deposition of ultrafine particles from Diesel exhaust aerosol

X. Margot, A. Gil, José M. Desantes, 2006 .

A CFD ANALYSIS OF THE INFLUENCE OF DIESEL NOZZLE GEOMETRY ON THE INCEPTION OF CAVITATION

V. Macián, Raul Payri, F. J. Salvador, 2003 .

Towards a Predictive CFD Approach for Assessing Noise in Diesel Compression Ignition Engines.

Antonio J. Torregrosa, Alberto Broatch, X. Margot, 2017 .

A Numerical Study of the Influence of Diesel Nozzle Geometry on the Inner Cavitating Flow

Raul Payri, F. J. Salvador, X. Margot, 2002 .

CFD Study of Needle Motion Influence on the Spray Conditions of Single-Hole Injectors

Sergio Hoyas, X. Margot, P. Fajardo, 2011 .

Combined CFD-Phenomenological Approach to the Analysis of Diesel Sprays under Non-Evaporative Conditions

Raul Payri, X. Margot, A. Gil, 2008 .

A CFD Study of the Effect of the Needle Movement on the Cavitation Pattern of Diesel Injectors

X. Margot, S. Patouna, F. Ravet, 2009 .

Computational Study of Heat Transfer to the Walls of a DI Diesel Engine

X. Margot, A. Gil, Francisco Payri, 2005 .