Yingchun Liang

Lei Huang, Yingchun Liang, Yazhou Sun, 2011, Proceedings of 2011 International Conference on Electronic & Mechanical Engineering and Information Technology.

Design philosophy of an ultra-precision fly cutting machine tool for KDP crystal machining and its implementation on the structure design

Haitao Liu, Wanqun Chen, Yingchun Liang, 2014 .

Mechatronic system design for tiled large-aperture grating

Tao Jiang, Yingchun Liang, Lihua Lu, 2009, International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT).

A two-round design method for ultra-precision flycutting machine tools with stringent process requirements

Feihu Zhang, Wanqun Chen, Yingchun Liang, 2015 .

Computational Fluid Dynamics Analysis of an Aerostatic Journal Bearing with Slot-Entry Restrictors

Yingchun Liang, Yazhou Sun, Lihua Lu, 2011 .

Manufacture Process Evaluation of IFOG Using Multiple-Test Data Analysis

Haoting Liu, Lianjie Shan, Yingchun Liang, 2015 .

Dynamics design optimization and experimental validation of a miniaturized machine tool for micro-milling

Qiang Zhang, Kai Yang, Wanqun Chen, 2013, Prod. Eng..

Hydrostatic spindle dynamic design system and its verification

Peng Zhang, Haitao Liu, Wanqun Chen, 2014 .

Research on Dynamic Performance of Drum Brake

Yingchun Liang, Chaosheng Huang, Xuanfeng Wang, 2007 .

Design and analysis of a novel large-aperture grating device and its experimental validation

Fei Long, Yingchun Liang, Kai Cheng, 2013 .

Design and dynamic optimization of an ultraprecision diamond flycutting machine tool for large KDP crystal machining

Qiang Zhang, Yang Sun, Wanqun Chen, 2013 .

Frequency domain error analysis in turning

Yingchun Liang, Yazhou Sun, Guoda Chen, 2014 .

Finite element analysis on mounting configurations for large-aperture optical element

Yingchun Liang, Lihua Lu, Ruifeng Su, 2011, International Workshop on Image Processing and Optical Engineering.

The ultimate sharpness of single-crystal diamond cutting tools—Part II: A novel efficient lapping process

Kai Cheng, Tao Sun, Yingchun Liang, 2007 .

An expert system for hydro/aero-static spindle design used in ultra precision machine tool

Peng Zhang, Haitao Liu, Wanqun Chen, 2014 .

Single Edge Cutting Phenomenon and Instantaneous Uncut Chip Thickness Model of Micro-Ball-End Milling

Xiang Zhang, Yingchun Liang, Yazhou Sun, 2011 .

Thermal optimization of an ultra-precision machine tool by the thermal displacement decomposition and counteraction method

Peng Zhang, Wanqun Chen, Yingchun Liang, 2015 .

Three dimensional finite element simulation and analysis of residual stress in milling

Yingchun Liang, Yazhou Sun, Zesheng Lu, 2010, International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT).

Fourier transform based dynamic error modeling method for ultra-precision machine tool

Kornel Ehmann, Yingchun Liang, Guoda Chen, 2014, Other Conferences.

Study on the direct relation between machine error and machined form accuracy

Kornel Ehmann, Yingchun Liang, Guoda Chen, 2013 .

Investigation of the tool-tip vibration and its influence upon surface generation in flycutting

Qiang Zhang, Wanqun Chen, Xichun Luo, 2014 .

Development of an ultraprecision three axis micromilling machine

Bo Wang, Peng Zhang, Yingchun Liang, 2009, International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT).

An integrated method for waviness simulation on large-size surface

Wanqun Chen, Yingchun Liang, Yazhou Sun, 2015 .

Analyzing the effect of tool edge radius on cutting temperature in micro-milling process

Kai Yang, Yingchun Liang, W. Q. Chen, 2010, International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT).

Study on the temperature gradient evolution of large size nonlinear crystal based on the fluid-solid coupling theory

Peng Zhang, Fuzhong Sun, Yingchun Liang, 2014, Other Conferences.

Thermal analysis of the hydrostatic spindle system by the finite volume element method

Qiang Zhang, Yingchun Liang, Yazhou Sun, 2014 .

Analysis of Volumetric Error of Machine Tool Based on Monte Carlo Method

Wanqun Chen, Yingchun Liang, Jiaxuan Chen, 2013 .

Investigation on the thermal effects during nanometric cutting process while using nanoscale diamond tools

Xichun Luo, Yingchun Liang, Zhen Tong, 2014 .

Study on effects of the feed on AFM-based nano-scratching process using MD simulation

Tao Sun, Shen Dong, Yingchun Liang, 2007 .

Tool edge radius effect on cutting temperature in micro-end-milling process

Yingchun Liang, Kai Yang, Wanqun Chen, 2011 .

Study on Micromachine Tools in Fabrication of Microparts

Bo Wang, Yingchun Liang, Mingjun Chen, 2006, 2006 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

Finite element simulation of diamond tool geometries affecting the 3D surface topography in fly cutting of KDP crystals

Tao Sun, Yingchun Liang, Lei Zhang, 2013 .

The material removal mechanism in mechanical lapping of diamond cutting tools

Tao Sun, Kai Cheng, Yingchun Liang, 2005 .

Subsurface defects structural evolution in nano-cutting of single crystal copper

Yingchun Liang, Yazhou Sun, Yongbo Guo, 2015 .

Effects of scratching directions on AFM-based abrasive abrasion process

Tao Sun, Yingchun Liang, Yongda Yan, 2009 .

Finite element fractal method for thermal comprehensive analysis of machine tools

Yingchun Liang, Yazhou Sun, Lihua Lu, 2014 .

XPS analysis of the groove wearing marks on flank face of diamond tool in nanometric cutting of silicon wafer

Tao Sun, Kai Cheng, Yingchun Liang, 2008 .

Fabrication of millimeter scale nanochannels using the AFM tip-based nanomachining method

Tao Sun, Yingchun Liang, Yongda Yan, 2013 .

Integrated MD simulation of scratching and shearing of 3D nanostructure

Yingchun Liang, Mingjun Chen, Qingshun Bai, 2008 .

Modeling and experimental analysis of microburr formation considering tool edge radius and tool-tip breakage in microend milling

Yingchun Liang, Qingshun Bai, J. X. Chen, 2009 .

Finite element optimization of diamond tool geometry and cutting-process parameters based on surface residual stresses

Tao Sun, Kai Cheng, Yingchun Liang, 2007 .

Tool runout effects on wear and mechanics behavior in microend milling

Yingchun Liang, Qingshun Bai, Q. Bai, 2009 .

Molecular dynamics simulations of thermal effects in nanometric cutting process

Yingchun Liang, Yongbo Guo, Mingjun Chen, 2010 .

Analysis of adjusting effects of mounting force on frequency conversion of mounted nonlinear optics.

Yingchun Liang, Lihua Lu, Ruifeng Su, 2014, Applied optics.

3D PLLA/nano-hydroxyapatite scaffolds with hierarchical porous structure fabricated by low-temperature deposition manufacturing

Yingchun Liang, Xiongfei Zheng, T. Sun, 2012, Journal of Wuhan University of Technology-Mater. Sci. Ed..

Molecular dynamics study of scratching velocity dependency in AFM-based nanometric scratching process

Tao Sun, Yingchun Liang, Yongda Yan, 2009 .

Anisotropy of Single-Crystal Silicon in Nanometric Cutting

Yingchun Liang, Qingshun Bai, Jiaxuan Chen, 2017, Nanoscale Research Letters.

Investigation of the shape transferability of nanoscale multi-tip diamond tools in the diamond turning of nanostructures

Xichun Luo, Yingchun Liang, Zhen Tong, 2014 .

Mechanical and optical analysis of large-aperture optics mounted on a frame with a curved surface

Yingchun Liang, Lihua Lu, Ruifeng Su, 2014 .

Molecular dynamics simulation of processing using AFM pin tool

Tao Sun, Xichun Luo, Yingchun Liang, 2006 .

Molecular dynamics simulation of subsurface deformed layers in AFM-based nanometric cutting process

Tao Sun, Yingchun Liang, Yongda Yan, 2008 .

Surface and subsurface integrity in diamond grinding of optical glasses on Tetraform ‘C’

Qingliang Zhao, Yingchun Liang, John Corbett, 2007 .

Investigation on the Influence of Machine Tool Dynamics on the Wavefront Gradient of KH2PO4 Crystals

Yingchun Liang, Yazhou Sun, Wanqun Chen, 2014 .

Analysis of torque mounting configuration for nonlinear optics with large aperture

Yingchun Liang, Lihua Lu, Ruifeng Su, 2014 .

The ultimate sharpness of single-crystal diamond cutting tools—Part I: Theoretical analyses and predictions

Tao Sun, Kai Cheng, Yingchun Liang, 2007 .

Modelling and Simulation of Micro Cutting

Yingchun Liang, Qingshun Bai, Jiaxuan Chen, 2013 .

Investigation of the influence of constant pressure oil source fluctuations on ultra-precision machining

Chenhui An, Yingchun Liang, Yazhou Sun, 2015 .

Simulation and analysis of surface generation in micro-milling

Ruxu Du, Yingchun Liang, Yazhou Sun, 2006 .

Multi-scale surface simulation of the KDP crystal fly cutting machining

Xichun Luo, Yingchun Liang, Yazhou Sun, 2014 .