Yukitoshi Ihara

发表

Accuracy Test Standard for Five-axis Machining Centers

Yukitoshi Ihara, 2012 .

Effect of CAD/CAM Post Process on S-Shaped Machining Test for Five-Axis Machining Center

Ryuta Sato, Yukitoshi Ihara, Koichiro Takubo, 2019, Int. J. Autom. Technol..

On-machine Measurement Technologies

Yukitoshi Ihara, Hirotoshi Ohtsuka, Y. Ihara, 2009 .

A02 Preload Type of Machine Tools Spindle and Preload Change under Rotation

Yukitoshi Ihara, Keisuke Yamauchi, 2012 .

C4 Finished Test Piece Example for Five-axis Machining Centers(Multi-axis control machining)

Yukitoshi Ihara, Hideyuki Takeshima, 2009 .

D017 Design of Motion Accuracy Measurement Device with Three Displacement Sensors for Machine Tool and Comparison of its Setting Method

Yukitoshi Ihara, Masashi Yamaji, 2013 .

A Study on Tool Position and Posture Measurement Device by Using Parallel Mechanism

Yukitoshi Ihara, Shozo Matsushita, 2009, Int. J. Autom. Technol..

Ball Bar Measurement of Motion Accuracy in Simulating Cone Frustum Cutting on Multi-Axis Machine Tools

Yukitoshi Ihara, Toru Tajima, Kazutaka Tsuji, 2017, Int. J. Autom. Technol..

Design of motion accuracy measurement device with three displacement sensors for machine tool and comparison of its setting method

Yukitoshi Ihara, Masashi Yamaji, Naoki Hamabata, 2014 .

Analysis of NC Data for Machining Test of Cone-Frustum under Simultaneous Five-Axis Control

Masaomi Tsutsumi, Chengri Cui, Yukitoshi Ihara, 2011 .

C07 Verification of Cone Frustum Accuracy Test of Five-axis Machining Center

Yukitoshi Ihara, Toru Tajima, Kazutaka Tsuji, 2014 .

0210 Study on the Interpolation Motion Accuracy of Multi-tasking Machine Tools Using R-test

Yukitoshi Ihara, Naoki Hamabata, 2015 .

Contouring Accuracy Performance of Machine Tools with Recent Conventional Numerical Controller(Advanced machine tool)

Yukitoshi Ihara, 2005 .

Diagnosis of Motion Errors of the Rotary Axes in 5-axis Machining Center (1st Report)-The Procedure for Diagnosis of Angular Error Sources-

Iwao Yamaji, Yukitoshi Ihara, Yoshiaki Kakino, 2003 .

Ball Bar Measurement on Machine Tools with Rotary Axes

Yukitoshi Ihara, Y. Ihara, 2012, Int. J. Autom. Technol..

Influence of NC Program Quality and Geometric Errors Onto S-Shape Machining Accuracy

Ryuta Sato, Keiichi Shirase, Yukitoshi Ihara, 2018, Volume 4: Processes.

Influence of NC Program Quality and Geometric Errors of Rotary Axes on S-Shaped Machining Test Accuracy

Ryuta Sato, Keiichi Shirase, Yukitoshi Ihara, 2018 .

Evaluation of Linear Axis Motion Error of Machine Tools Using an R-test Device

Yukitoshi Ihara, Naoki Hamabata, Yamaji Masashi, 2014 .

Sensitivity Analysis in Ballbar Measurement of 3D Circular Interpolation Motion Equivalent to Cone-Frustum Cutting in Five-Axis Machining Centers

Masaomi Tsutsumi, Ryuta Sato, Yukitoshi Ihara, 2012 .

Development of Testing Method of Five-Axis Machining Centres Based on Finishing of Truncated Square Pyramid

Masaomi Tsutsumi, Chengri Cui, Yukitoshi Ihara, 2011 .

Fundamental Study of the On-Machine Measurement in the Machining Center with a Touch Trigger Probe

Yukitoshi Ihara, Takehiro Nagasawa, 2013, Int. J. Autom. Technol..

STUDY ON-MACHINE WORK PIECE MEASUREMENT ON 5-AXIS CONTROLLED MACHINING CENTER

Yukitoshi Ihara, Shunsuke Nakamura, 2007 .

3701 On-Machine Workpiece Measurement for Process Combination

Yukitoshi Ihara, 2007 .

A18 Standardization of testing methods for kinematic motion of five-axis machining centers : Draft proposal for ISO standard

Masaomi Tsutsumi, Soichi Ibaraki, Nozomu Mishima, 2008 .

Alternative to parallelism test method for 5-axis machining center

Yukitoshi Ihara, Kohei Kishitani, 2019 .

Design of Motion Accuracy Measurement Device for NC Machine Tools with Three Displacement Sensors

Yukitoshi Ihara, Yuki Hiramatsu, Y. Ihara, 2011, Int. J. Autom. Technol..

Study on EDM on machining center

Yoshihiro Kita, Yukitoshi Ihara, Yasuhiro Murakami, 2003 .

Sensitivity Analysis in Ball Bar Measurement of Three-Dimensional Circular Movement Equivalent to Cone-Frustum Cutting in Five-Axis Machining Centers

Masaomi Tsutsumi, Ryuta Sato, Yukitoshi Ihara, 2013 .

122 A Performance Transition of Friction Guideway in Machining Centers

Yukitoshi Ihara, Hidenori Saraie, Yoshiaki Sugimoto, 2001 .

Development of a MOEDM hybrid processing system

Yoshihiro Kita, Yukitoshi Ihara, Dai Nishimura, 2004 .

Analysis of the motion accuracy of 5-axis controlled machining centers using DBB method

Yoshiaki Kakino, Yukitoshi Ihara, Zainal Abidin Ahmad, 1998 .

B32 Circular Motion Accuracy of CNC Lathe with Friction Guide

Yukitoshi Ihara, 2014 .

Motion Error of Machine Tools due to Friction of Feed Drive and Dual Feed Back System

Yukitoshi Ihara, Masatomo Hashimoto, Shunsuke Nakamura, 2004 .

Ball Bar Measurement Equivalent to Cone Frustum Cutting on Multi-axis Machine

Yukitoshi Ihara, Kazuya Tanaka, 2005 .

A Study on the Improvement of Motion Accuracy of Hexapod type Parallel Mechanism Machine Tool(1st Report). The method of Kinematic Calibration without Gravitation Deformation.

Yoshiaki Kakino, Yukitoshi Ihara, Tetsuya Matsushita, 2001 .

Measurement of Motion Accuracy and Improvement of Machining Accuracy on Ultra-high Precision NC Machine Tools by Using Cross Grid Encoder Test.

Yoshiaki Kakino, Yukitoshi Ihara, Minoru Hamamura, 1996 .

A Study on the Motion Accuracy of NC Machine Tools (7th Report) : The Measurement of Motion Accuracy of 5 Axis Machine by DBB Test

Yoshiaki Kakino, Yukitoshi Ihara, Hisashi Otsubo, 1994 .

A Study on the Motion Accuracy of NC Machine Tools (2nd Report)

Yoshiaki Kakino, Yukitoshi Ihara, Yoshio Nakatsu, 1986 .

Compensation of 3-dimensional coordinate measuring machine and evaluation of double ball bar test by error vector analysis.

Yoshiaki Kakino, Yukitoshi Ihara, Toru Ise, 1985 .

Study on Amendable Machining System by Using Machining and Measuring Center (1st Report)

Atsushi Matsubara, Yoshiaki Kakino, Yukitoshi Ihara, 1993 .

A study on the motion accuracy of NC machine tools. (4th report). Compensating for decreasing error of the circle radius during circular interpolation motion.

Yoshiaki Kakino, Yukitoshi Ihara, Yoshio Nakatsu, 1988 .