Sachin Maheshwari

发表

Multi-Response Optimization of Fused Deposition Modelling Process Parameters of ABS Using Response Surface Methodology (RSM)-Based Desirability Analysis

T. K. Kundra, Manu Srivastava, Sachin Maheshwari, 2017 .

Additive Manufacturing Technologies

T. K. Kundra, Arshad Noor Siddiquee, Manu Srivastava, 2018 .

Additive Manufacturing

Manu Srivastava, Sachin Maheshwari, Sandeep Rathee, 2019, Sustainability, Innovation and Procurement.

4-phase resettable quasi-adiabatic flip-flops and sequential circuit design

Izzet Kale, Sachin Maheshwari, V. A. Bartlett, 2016, 2016 12th Conference on Ph.D. Research in Microelectronics and Electronics (PRIME).

A VHDL-based Modelling Approach for Rapid Functional Simulation and Verification of Adiabatic Circuits

Izzet Kale, Sachin Maheshwari, Viv A. Bartlett, 2020 .

Modeling Electrical Discharge Machining Process Using Artificial Neural Network for the Machining of Inconel 825

Sachin Maheshwari, Pushpendra S. Bharti, Himanshu Payal, 2017 .

Experimental results and analysis for Electrical Discharge Machining (EDM) of aluminium metal matrix composites with powder-mixed dielectric: Lenth's method

Aloke Dey, Sachin Maheshwari, Shankar Singh, 2010, Int. J. Manuf. Technol. Manag..

Additive Manufacturing Design and Strategies

Manu Srivastava, Sachin Maheshwari, Sandeep Rathee, 2019 .

Process Modeling of Electric Discharge Machining of Inconel 825 Using Artificial Neural Network

Sachin Maheshwari, Pushpendra S. Bharti, Himanshu Payal, 2017 .

Adiabatic approach for low-power passive near field communication systems

Sachin Maheshwari, S. Maheshwari, 2018 .

Impact of Adiabatic Logic Families on the Power-Clock Generator Energy Efficiency

I. Kale, Sachin Maheshwari, 2019, 2019 15th Conference on Ph.D Research in Microelectronics and Electronics (PRIME).

The Autotrix: Design and Implementation of an Autonomous Urban Driving System

Satish Chand, Sachin Maheshwari, Animesh Garg, 2011 .

Hybrid CMOS/Memristor Circuit Design Methodology pdf

Timothy G. Constandinou, Christos Papavassiliou, Spyros Stathopoulos, 2020, ArXiv.

Convex Optimization of Energy and Delay Using Logical Effort Method in Deep Sub-micron Technology

Pramod Kumar, Anu Gupta, Sachin Maheshwari, 2013, VDAT.

Multi-objective optimization of electric-discharge machining process using controlled elitist NSGA-II

Sachin Maheshwari, Chitra Sharma, Pushpendra S. Bharti, 2012 .

Generalized Additive Manufacturing Process Chain

Manu Srivastava, Sachin Maheshwari, Sandeep Rathee, 2019, Additive Manufacturing.

Analysing and measuring the performance of memristive integrating amplifiers pdf

Christos Papavassiliou, Themistoklis Prodromakis, Sachin Maheshwari, 2020, Int. J. Circuit Theory Appl..

Logical effort based power-delay-product optimization

Anu Gupta, Sachin Maheshwari, Jimit Patel, 2014, 2014 International Conference on Advances in Computing, Communications and Informatics (ICACCI).

Evolution of Additive Manufacturing Technologies

Manu Srivastava, Sachin Maheshwari, Sandeep Rathee, 2019 .

Multi-objective optimisation of fused deposition modelling process parameters using RSM and fuzzy logic for build time and support material

T. K. Kundra, Manu Srivastava, Sachin Maheshwari, 2018 .

A comparative analysis of power and delay optimise digital logic families for high performance system design

Anu Gupta, Sachin Maheshwari, Himadri Singh Raghav, 2014 .

Performance Analysis of Subthreshold 32-Bit Kogge-Stone Adder for Worst-Case-Delay and Power in Sub-micron Technology

Sachin Maheshwari, Himadri Singh Raghav, B. Prasad Singh, 2013, VDAT.

Multi-objective optimisation of electrical discharge machining for Inconel 825 using Taguchi-fuzzy approach

Sachin Maheshwari, Pushpendra S. Bharti, Himanshu Payal, 2019 .

Estimation of the Effect of Process Parameters on Build Time and Model Material Volume for FDM Process Optimization by Response Surface Methodology and Grey Relational Analysis

T. K. Kundra, Manu Srivastava, Sachin Maheshwari, 2017 .

Modelling, simulation and verification of 4-phase adiabatic logic design: A VHDL-Based approach

Izzet Kale, Sachin Maheshwari, Vivian A. Bartlett, 2019, Integr..

Experimental Investigation of Process Parameters for Build Time Estimation in FDM Process Using RSM Technique

T. K. Kundra, Manu Srivastava, Sachin Maheshwari, 2016 .

An Integrated RSM-GA Based Approach for Multi Response Optimization of FDM Process Parameters for Pyramidal ABS Primitives

T. K. Kundra, Manu Srivastava, Sachin Maheshwari, 2016 .

Integration of Fuzzy Logic with Response Surface Methodology for Predicting the Effect of Process Parameters on Build Time and Model Material Volume in FDM Process

T. K. Kundra, Manu Srivastava, Sachin Maheshwari, 2016 .

Optimisation of multiperformance characteristics in electric discharge machining of Aluminium Matrix Composites (AMCs) using Taguchi DOE methodology

Sachin Maheshwari, Shankar Singh, Poorn Chandra Pandey, 2007, Int. J. Manuf. Res..

DESIGN AND SELECTION OF HINGE JOINT CONCEPT FOR CASUALTY EVACUATION BACKPACK STRETCHER USING IPD TOOLS LIKE QFD

Suresh Garg, Sachin Maheshwari, Prem Chand Gupta, 2012 .

Multi-Objective Optimization of Electric Discharge Machining for Inconel 718

Sachin Maheshwari, Pushpendra S. Bharti, 2016 .

Adiabatic flip-flops and sequential circuit design using novel resettable adiabatic buffers

Izzet Kale, Sachin Maheshwari, Vivian A. Bartlett, 2017, 2017 European Conference on Circuit Theory and Design (ECCTD).

Energy efficient implementation of multi-phase quasi-adiabatic Cyclic Redundancy Check in near field communication

Izzet Kale, Sachin Maheshwari, V. A. Bartlett, 2018, Integr..

Neural-Network- Based Modeling of Electric Discharge Machining Process

Sachin Maheshwari, Chitra Sharma, Pushpendrai Singh Bharti, 2011, SOCO.

Materials for Additive Manufacturing

Manu Srivastava, Sachin Maheshwari, Sandeep Rathee, 2019, Additive Manufacturing.

Additive Manufacturing Processes

T. K. Kundra, Manu Srivastava, Sachin Maheshwari, 2019, Additive Manufacturing.

VHDL-Based Modelling Approach for the Digital Simulation of 4-Phase Adiabatic Logic Design

Izzet Kale, Sachin Maheshwari, Vivian A. Bartlett, 2018, 2018 28th International Symposium on Power and Timing Modeling, Optimization and Simulation (PATMOS).

Adiabatic Implementation of Manchester Encoding for Passive NFC System

Izzet Kale, Sachin Maheshwari, 2019, 2019 Design, Automation & Test in Europe Conference & Exhibition (DATE).

Characterization of Logical Effort for Improved Delay

Anu Gupta, Sachin Maheshwari, Himadri Singh Raghav, 2013, VDAT.

Optimal design of flux for submerged arc weld properties based on RSM coupled with GRA and PCA

Arshad Noor Siddiquee, Zahid A. Khan, Sachin Maheshwari, 2020, Int. J. Manuf. Technol. Manag..

An Adiabatic Regenerative Capacitive Artificial Neuron

Christos Papavassiliou, Themistoklis Prodromakis, Sachin Maheshwari, 2021, 2021 IEEE International Symposium on Circuits and Systems (ISCAS).

Virtual Modelling and Simulation of Functionally Graded Material Component using FDM Technique

T. K. Kundra, Manu Srivastava, Sachin Maheshwari, 2015 .