Farhad Nabhani

发表

Linear barcodes, direct part marking and RFID for material handling applications

Athanasios Klonis, Farhad Nabhani, 2010, Int. J. Manuf. Technol. Manag..

Sensitivity analysis of spray painting process to input parameters: Validation of CFD jet impingement model against an experimental dataset

Vahid Askari, Farhad Nabhani, Barry Moore, 2017 .

Manufacture and Instrumentation of Bio-Mechanical Shoulder Testing Rig for Medical Applications

David Hughes, Farhad Nabhani, F. Nabhani, 2014 .

Increased Composite Hand-Layup Repeatability Using End-End Design And Manufacture Simulation Software

David Hughes, Farhad Nabhani, 2018 .

Monitoring and control instrumentation of gravity crude separator

Farhad Nabhani, Ian French, Mohamed Sawessi, 2009 .

Development of a 100kW, 20 kHz Nanocrystalline Core Transformer for DC / DC Converter Applications

Vahid Askari, Farhad Nabhani, Kapila Warnakulasuriya, 2016 .

Determination of Losses in Conductors Carrying Higher Order Harmonics of Significant Amplitudes

Farhad Nabhani, Kapila Warnakulasuriya, Simon Hodgson, 2014 .

Estimation of Temperature Rise in MVA Range Dry-Type Transformers and Practical Verification Based on Simulated

Farhad Nabhani, Simon Hodgson, Kapila Warnakulasuriya, 2015 .

Power system DNP3 data object security using data sets

Farhad Nabhani, Richard Cheung, Todd Mander, 2010, Comput. Secur..

Review of implementing Lean Six Sigma to reduce environmental wastes of internal supply chains in food industry

Farhad Nabhani, Alireza Shokri, Shilon Bala, 2017 .

Bracing shoulder injuries caused by rear impacts

David Hughes, Farhad Nabhani, Simon Hodgson, 2009 .

Control centre purchasing: a lean method for the optimization of variance

Farhad Nabhani, Christian Uhl, Florian Kauf, 2016 .

Monitoring and measuring different liquid levels in crude oil production facilities

Farhad Nabhani, Ian French, Mohamed Sawessi, 2011 .

RFID opportunities within manufacturing SMEs

Sara Zarei, Farhad Nabhani, Simon Hodgson, 2011, Int. J. Manuf. Res..

Aligning plastics component manufacturers with OEM driven 4.0 initiatives in the automotive sector

Farhad Nabhani, Christian Uhl, David Hughes, 2017 .

Assessment of Microstructural Effect on Weld Fatigue Prediction in the Oil and Gas Sector

David Hughes, Vahid Askari, Farhad Nabhani, 2015 .

Feasibility of an AIDC system within a manufacturing SME

Sara Zarei, Farhad Nabhani, Simon Hodgson, 2009 .

Analysis of Effectiveness of Wall Film & Accretion Models in predicting Automotive Paint Deposition

Vahid Askari, Farhad Nabhani, Barry Moore, 2015 .

Biomechanical evaluation of optimal humeral fracture fixation devices

Farhad Nabhani, Simon Hodgson, David Hughes, 2010 .

Mechanism of Unlimited WAN Expansion for Networks in Power Distribution Systems

Farhad Nabhani, Frank Chen, Richard Cheung, 2006, 2006 Large Engineering Systems Conference on Power Engineering.

Power System Peer-to-Peer Networking Data Object Based Security

Farhad Nabhani, Richard Cheung, Todd Mander, 2006, 2006 Large Engineering Systems Conference on Power Engineering.

Development and distribution of a questionnaire to evaluate technology within the UK Foundry Industry

Farhad Nabhani, Simon Hodgson, Martin McKie, 2012 .

Comparison of two tools for the measurement of interfragmentary movement in femoral neck fractures stabilised by cannulated screws

Farhad Nabhani, Eddie Bradley, Simon Hodgson, 2010 .

Impact properties of floor coverings and their role during simulated hip fractures

Farhad Nabhani, James Bamford, F. Nabhani, 2004 .

Electrochemical Behaviour of Low Carbon Steel in Aqueous Solutions

Farhad Nabhani, A. M. Jasim, S. W. Graham, 2007, World Congress on Engineering.

The introduction of a KPI to monitor spent foundry sand disposal

Farhad Nabhani, K. Bridgewood, Martin McKie, 2009 .

Manufacture of a mechanical test rig to simulate the movements of forces within the shoulder

Farhad Nabhani, Simon Hodgson, Martin McKie, 2009 .

Critical infrastructure protection security layer for DNP3 devices

Farhad Nabhani, Simon Hodgson, Todd Mander, 2012, Int. J. Manuf. Res..

AIDC feasibility within a manufacturing SME

Sara Zarei, Farhad Nabhani, Simon Hodgson, 2010 .

Leakage Inductance Estimation Of Mva Range Single Phase Transformers

David Hughes, Vahid Askari, Farhad Nabhani, 2015 .

Implementation of a sustainable alternative to the disposal of spent foundry sand at landfill

Farhad Nabhani, Martin McKie, F. Nabhani, 2010 .

Effects of carbon dioxide & sulphar contents in gas processing plant

Farhad Nabhani, Simon Hodgson, Abbas Jasim, 2009 .

Optimization of 12 and 18 pulse rectifier systems by the selection of optimum parameters for magnetics

Vahid Askari, Farhad Nabhani, Kapila Warnakulasuriya, 2016 .

Development of High Power, High Frequency Magnetics for the Future Power Electronics Applications

Farhad Nabhani, Kapila Warnakulasuriya, Simon Hodgson, 2015 .

A case study on a sustainable alternative to the landfill disposal of spent foundry sand

Farhad Nabhani, Simon Hodgson, Martin McKie, 2013 .

Service Entrance Multiple-Function Power Converter for Quality Power Supply to Critical and Sensitive Loads

Lin Wang, Farhad Nabhani, Frank Chen, 2006, 2006 Large Engineering Systems Conference on Power Engineering.

Wear mechanisms of ultra-hard cutting tools materials

Farhad Nabhani, F. Nabhani, 2001 .

Evaluating sustainability in the UK fast food supply chain : Review of dimensions, awareness and practice

Farhad Nabhani, David Oglethorpe, Alireza Shokri, 2014 .

Investigating the readiness of people in manufacturing SMEs to embark on Lean Six Sigma projects: An empirical study in the German manufacturing sector

Farhad Nabhani, Alireza Shokri, F. Nabhani, 2016 .