Byung-il Kwon

Thomas A. Lipo, Byung-il Kwon, S. M. Sajjad Hossain Rafin, 2015, 2015 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia).

Multi-objective optimal design of 2 phase in-wheel PMSM for mobile robot

Byung-il Kwon, Dong-ju Shin, 2010, Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation.

Design and analysis of high speed BLDC motor for centrifuge

Byung-il Kwon, Hyeon-Myeong Yang, Jin-Wook Cha, 2015, 2015 18th International Conference on Electrical Machines and Systems (ICEMS).

Characteristic Analysis of an Axial Flux Double Stator Permanent Magnet Vernier Machine

Fei Zhao, Min-Soo Kim, Byung-il Kwon, 2013 .

Design Consideration to Improve Torque in Axial Flux PM Vernier Machine

Fei Zhao, Byung-il Kwon, 2014 .

Influence on Magnet of Blushless DC Motor due to Load Torque Variation of Reciprocating Compressor

Byung-Taek Kim, Byung-il Kwon, Dae-Kyong Kim, 2008 .

Performance Analysis with Capacitor of A Novel Two-phase Permanent Magnet Synchronous Motor

Thomas A. Lipo, Fei Zhao, Byung-il Kwon, 2011 .

A single-phase on-line UPS system for multiple load transformers

Syed Sabir Hussain Bukhari, Byung-il Kwon, 2017, IEICE Electron. Express.

A novel cost-effective two-level inverter with combined use of thyristors and IGBTs

Baodong Bai, Dezhi Chen, Byung-il Kwon, 2017, 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia (IFEEC 2017 - ECCE Asia).

A new single-phase sag compensator intended for transformer-coupled loads

Syed Sabir Hussain Bukhari, Byung-il Kwon, 2016, IEICE Electron. Express.

Parameter Analysis and Operation of A Novel Two-phase Permanent Magnet Synchronous Motor

Thomas A. Lipo, Fei Zhao, Byung-il Kwon, 2012 .

Design of a rotary type magnetic position sensor for automobile accel pedal

In-Soung Jung, Byung-il Kwon, Se-Hyun Rhyu, 2003, Sixth International Conference on Electrical Machines and Systems, 2003. ICEMS 2003..

Design of grid-connected to rotor type Doubly-Fed Induction Generators for wind turbine system

Thomas A. Lipo, Byung-il Kwon, Sang-hoon Kim, 2010, Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation.

Newly Structured Double Excited Two-Degree-of-Freedom Motor for Security Camera

Byung-il Kwon, Jae-Sung Lee, Se-hyun Rhyu, 2008, IEEE Transactions on Magnetics.

Inrush Current Elimination for a Three-Phase Off-Line UPS System

Syed Sabir Hussain Bukhari, Byung-il Kwon, 2015 .

A Distributed Winding Wound Field Pole-Changing Vernier Machine for Variable Speed Application

Byung-il Kwon, Noman Baloch, B. Kwon, 2019, IEEE Transactions on Magnetics.

Experimental investigations and simulations using FEM for the direct field oriented control of linear induction motor

Sang-Woo Lee, Byung-il Kwon, Kyung-Il Woo, 1997, 1997 IEEE International Electric Machines and Drives Conference Record.

Optimal design of brushless wound rotor synchronous machine for torque ripple reduction

Byung-il Kwon, Ghulam Jawad Sirewal, Qasim Ali, 2016, 2016 IEEE Conference on Electromagnetic Field Computation (CEFC).

Efficiency optimal design of interior permanent magnet machine for scooter

Fei Zhao, Byung-il Kwon, Jin-hee Lee, 2013, 2013 International Conference on Electrical Machines and Systems (ICEMS).

Digital Implementation of PWM Techniques for Two-phase Eight-switch Inverter fed Brushless DC Motor Drives

Hai Lin, Byung-il Kwon, Yong-Min You, 2013 .

Current Control of a Three-leg Voltage Source Inverter for Two Phase AC Motor

Thomas A. Lipo, Shahid Atiq, Byung-il Kwon, 2014 .

Dynamic Analysis of Double Excited 3-DOF Motor Modeling using Equivalent Magnetic Circuit

Min-Soo Kim, Byung-il Kwon, Se-Hyun Rhyu, 2015 .

Optimal design of spoke type motor to improve the torque constant and minimize torque ripple

Byung-il Kwon, Wenliang Zhao, Tanveer Yazdan, 2016 .

Performance and Analysis of a Novel Permanent Magnet Vernier Machine

Thomas A. Lipo, Fei Zhao, Byung-il Kwon, 2013 .

Novel field weakening technique for Surface Mounted Permanent Magnet machine using Current Regulated Voltage Source Inverters

Thomas A. Lipo, Shahid Atiq, Byung-il Kwon, 2014, 2014 International Symposium on Power Electronics, Electrical Drives, Automation and Motion.

Design and analysis of a high-performance dual-rotor PM synchronous reluctance machine with toroidal windings

Dezhi Chen, Xiuhe Wang, Byung-il Kwon, 2019, International Journal of Applied Electromagnetics and Mechanics.

Design and Performance Analysis of a Novel Two Phase BLDC Machine with Thin Magnets Avoiding Demagnetization

Thomas A. Lipo, Fei Zhao, Byung-il Kwon, 2014 .

A study on fault-tolerant operation of a two-phase permanent magnet synchronous motor based on structual alteration

Fei Zhao, T. A. Lipo, Byung-il Kwon, 2016, 2016 IEEE Conference on Electromagnetic Field Computation (CEFC).

A Novel Dual Airgap Ferrite Permanent Magnet Motor with Auxiliary Inner Stator fo In-Wheel Applications

Byung-il Kwon, Wenliang Zhao, 2015 .

Dual rotor flux switching permanent magnet machines with phase-group concentrated-coil windings for high performance

Byung-il Kwon, Wenliang Zhao, 2016 .

Design and comparative analysis of single and multi-stack axial flux permanent magnet synchronous generator

Byung-il Kwon, Qurban Ali Shah Syed, Yong-Min You, 2012 .

Design of an Auxiliary Switching Power Supply

Dezhi Chen, Byung-il Kwon, Yixiao Luo, 2015 .

Current Control of a Four-leg Inverter for Three-phase AC motors

Thomas A. Lipo, Byung-il Kwon, Yixiao Luo, 2015 .

Axial Flux Dual Stator Doubly Fed Reluctance Machine Rotor design

Thomas A. Lipo, Byung-il Kwon, Salman Khaliq, 2015 .

Spoke-type Interior Permanent Magnet Motors with Asymmetrical Rotor Structures for High Torque Density

Byung-il Kwon, Wenliang Zhao, 2015 .

Iron loss and torque analysis of fe-based model for inverter-fed spoke type IPMSM with optimized rotor pole for sinusoidal distributed back-EMF

Byung-il Kwon, Kyu-yun Hwang, 2010, Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation.

Wide speed range operation of PM machines using windings switching utilizing phase swapping

Thomas A. Lipo, Shahid Atiq, Byung-il Kwon, 2015 .

Design of a novel rotor structure for PM-assisted synchronous reluctance machines to improve torque characteristics

Byung-il Kwon, Wenliang Zhao, Fuzhen Xing, 2016, 2016 IEEE Conference on Electromagnetic Field Computation (CEFC).

Asymmetrical Fault Correction for the Sensitive Loads Using a Current Regulated Voltage Source Inverter

Thomas A. Lipo, Syed Sabir Hussain Bukhari, Shahid Atiq, 2016 .

Design and Analysis of Novel 2-Phase Dual Stator Spoke-type Permanent Magnet Machines with High Torque Density

Thomas A. Lipo, Byung-il Kwon, Wenliang Zhao, 2014 .

Design Methodology for Minimal Stator Copper Loss in A Single-phase Induction Motor

Byung-Taek Kim, Byung-il Kwon, Soo-whang Baek, 2008 .

Selection of IGBTs for controlling rectifier and inverter based upon a novel analytical approach for loss calculation

Baodong Bai, Dezhi Chen, Byung-il Kwon, 2015, 2015 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia).

Design and Implementation of an Adaptive Speed Observer for Sensorless Two-Phase Permanent Magnet Synchronous Motor drives

Byung-il Kwon, Hai Lin, 2011 .

Characteristics Analysis According to Switching of Switched Reluctance Generator

Ju-Hwan Oh, Byung-il Kwon, Jae-Seok Oh, 2008 .

Comparison of 2-Phase Permanent Magnet Machines with Different Stator Configurations Equipped with Phase-group Concentrated-coil Windings

Byung-il Kwon, Wenliang Zhao, 2014 .

A Three-Phase Line-Interactive UPS System to Eliminate the Inrush Current Phenomenon during Switching-in of an Auxiliary Load while Powering the Main Load

Syed Sabir Hussain Bukhari, Byung-il Kwon, Muhammad Ayub, 2018 .

Optimal Rotor shape design of Interior Permanent Magnet Synchronous Motor for improving Average Torque by Increasing the Reluctance Torque

Byung-il Kwon, Muhammad Ayub, 2016 .

Space-vector PWM Techniques for a Two-Phase Permanent Magnet Synchronous Motor Considering a Reduction in Switching Losses

Fei Zhao, Byung-il Kwon, Hai Lin, 2015 .

A Study on Analysis of Inverter-fed Induction Motor's Bearing Current using Improved Equivalent Ciruit Parameters

Jung-Pyo Hong, Byung-Taek Kim, Byung-il Kwon, 2007 .

Design and analysis of a novel three-phase U-core stator PMSM with modular topology

Fei Zhao, Byung-il Kwon, Hai Lin, 2016 .

Development of flux switching PM machines with phase-group concentrated-coil windings for robot applications

Byung-il Kwon, Wenliang Zhao, Jung-Woo Kwon, 2016, 2016 IEEE Conference on Electromagnetic Field Computation (CEFC).

Harmonic Current Generation using Thyristor Circuits for Excitation of Brushless Wound Rotor Synchronous Machine

Thomas A. Lipo, Byung-il Kwon, Ghulam Jawad, 2015 .

Prototype and Test of A Dual-stator PM Vernier Machine for Direct-drive Systems

Fei Zhao, Byung-il Kwon, 2015 .

Dual airgap stator- and rotor- permanent magnet machines with spoke-type configurations using phase-group concentrated-coil windings

Thomas A. Lipo, Byung-il Kwon, Wenliang Zhao, 2017, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

The analysis of bearing current using common mode equivalent circuit parameters by FEM

Byung-il Kwon, Ji-hoon Jun, Chul-kyu Lee, 2005, 2005 International Conference on Electrical Machines and Systems.

Susceptibility of the winding switching technique for flux weakening to harmonics and the choice of a suitable drive topology

Shahid Atiq, Byung-il Kwon, 2017 .

Optimal design of a cost-effective SPM motor to suppress torque pulsations using multi-grade permanent magnets

Byung-il Kwon, Wenliang Zhao, 2016, 2016 IEEE Conference on Electromagnetic Field Computation (CEFC).

Analysis of Bearing Current of the Inverter-fed Induction Motor Using Equivalent Circuit Parameters by FEM

Byung-il Kwon, Ji-hoon Jun, Byung-teak Kim, 2006, 2006 12th Biennial IEEE Conference on Electromagnetic Field Computation.

Unsymmetrical fault correction for sensitive loads utilizing a current regulated inverter

Thomas A. Lipo, Syed Sabir Hussain Bukhari, Byung-il Kwon, 2014, 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014.

An inrush current elimination technique for a voltage sag compensator while powering transformer-coupled loads

Syed Sabir Hussain Bukhari, Shahid Atiq, Byung-il Kwon, 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

An inrush current reduction technique for the line-interactive uninterruptible power supply systems

Thomas A. Lipo, Syed Sabir Hussain Bukhari, Byung-il Kwon, 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

Design and analysis of a novel PM-assisted synchronous reluctance machine with axially integrated magnets by finite element method

Thomas A. Lipo, Byung-il Kwon, Wenliang Zhao, 2016, 2016 IEEE Conference on Electromagnetic Field Computation (CEFC).

Temperature Field Analysis of an Outer Rotor Brushless DC Motor for Range Hoods

Byung-il Kwon, Wenping Chai, Wenliang Zhao, 2016 .

Analysis of Operating Characteristics of PM-Type Magnetic Circuit Breaker

Byung-il Kwon, Kyung-Il Woo, Hee-Deuk Jun, 2003 .

Maximum Likelihood Sequence Estimation in the Presence of Timing Misalignment and Polarization Mode Dispersion in Optically Amplified Return-to-Zero Systems

Lian-Kuan Chen, Chun-Kit Chan, Byung-il Kwon, 2006, 2006 IEEE International Conference on Communications.

Advanced brushless DC motor drive without position sensor for home appliances

Byung-il Kwon, Dae-kyong Kim, Byung-taek Kim, 2007, 2007 International Conference on Electrical Machines and Systems (ICEMS).

Optimization of Novel Flux Barrier in IPM Type BLDC Motor Based on Modified Taguchi Method

Byung-il Kwon, Kyu-yun Hwang, Byoung-Yull Yang, 2008 .

Low-Cost High-Torque-Density Dual-Stator Consequent-Pole Permanent Magnet Vernier Machine

Yuting Gao, Byung-il Kwon, Noman Baloch, 2018, IEEE Transactions on Magnetics.

Experimental Verification of an Inrush Current Elimination Technique for Line-Interactive UPS Systems

Thomas A. Lipo, Syed Sabir Hussain Bukhari, Shahid Atiq, 2014 .

Multi-objective optimal design for in-wheel permanent magnet synchronous motor

Byung-il Kwon, Dong-joo Shin, 2009, 2009 International Conference on Electrical Machines and Systems.

Computations of Line Reactor Parameters and DC Bus Capacitance for Inverter

Dezhi Chen, Byung-il Kwon, Wenping Chai, 2015 .

A new brushless wound rotor synchronous machine using a special stator winding arrangement

Byung-il Kwon, Asif Hussain, 2018 .

A novel spoke-type IPM machine with surface-mounted magnets to improve torque characteristics

Byung-il Kwon, Wenliang Zhao, Xing Fuzhen, 2019 .

Novel Design of Flux Barrier in IPM type BLDC motor by considering the Multi-response Taguchi Method

Sang-Bong Rhee, Byung-il Kwon, Byoung-Yull Yang, 2007 .

An Online UPS System That Eliminates the Inrush Current Phenomenon While Feeding Multiple Load Transformers

Thomas A. Lipo, Syed Sabir Hussain Bukhari, Byung-il Kwon, 2017, IEEE Transactions on Industry Applications.

Characteristics Analysis of a Novel Dual Stator Axial Flux Spoke-type Permanent Magnet Machine with Phase-Group Concentrated-coil Winding

Thomas A. Lipo, Byung-il Kwon, Wenliang Zhao, 2013 .

A Sag Compensator That Eliminates the Possibility of Inrush Current While Powering Transformer-Coupled Loads

Syed Sabir Hussain Bukhari, Shahid Atiq, Byung-il Kwon, 2017, IEEE Journal of Emerging and Selected Topics in Power Electronics.

An inrush current elimination technique for line-interactive UPS systems during switching-in of an auxiliary load while feeding a main load

Thomas A. Lipo, Syed Sabir Hussain Bukhari, Byung-il Kwon, 2014 .

New PWM Technique for Two-Phase Brushless DC Motor Drives

Byung-il Kwon, Hai Lin, 2013 .

A Line-Interactive Uninterruptible Power Supply System with Current Regulated Voltage Source Inverter

Thomas A. Lipo, Syed Sabir Hussain Bukhari, Byung-il Kwon, 2013 .

Improved model of the iron loss for the permanent magnet synchronous motors

Byung-il Kwon, Ikram Junaid, Junaid Qudsia, 2010, 2010 International Conference on Electrical Machines and Systems.

Dual-stator Interior Permanent Magnet Vernier Machine Having Torque Density and Power Factor Improvement

Thomas A. Lipo, Fei Zhao, Byung-il Kwon, 2014 .

Design and analysis of an axial flux dual stator flux modulating synchronous reluctance machine

Byung-il Kwon, Salman Khaliq, Noman Baloch, 2019 .

A novel grid-connected to rotor type doubly fed induction generator for wind turbine systems

Thomas A. Lipo, Byung-il Kwon, Yong-min You, 2011, 8th International Conference on Power Electronics - ECCE Asia.

Asymmetrical Rotor Structures in PM-assisted Synchronous Reluctance Motor for High Torque Characteristics

Byung-il Kwon, Wenliang Zhao, Fuzhen Xing, 2016 .

Design and optimisation of a novel asymmetric rotor structure for a PM-assisted synchronous reluctance machine

Byung-il Kwon, Wenliang Zhao, Fuzhen Xing, 2019 .

Modeling of SPM Motor with Novel Permanent Magnet Pole Shape for Reducing Torque Pulsation

Thomas A. Lipo, Byung-il Kwon, Qurban Ali Shah Syed, 2011 .

Dual-stator, spoke-type ferrite permanent magnet motor with phase-group concentrated-coil windings using auxiliary inner stator

Byung-il Kwon, Wenliang Zhao, 2016, 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM).

Development and test of a dual-stator, spoke-type ferrite permanent magnet motor with high torque performance for direct-drive applications

Thomas A. Lipo, Byung-il Kwon, Wenliang Zhao, 2016, 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM).

Optimal Design and Experimental Verification of Wound Rotor Synchronous Machine Using Subharmonic Excitation for Brushless Operation

Shahid Atiq, Byung-il Kwon, Asif Hussain, 2018 .

Dynamic Characteristic Analysis of Small Sized PM Type Stepping Motor with H Shape Stator Yoke

In-Soung Jung, Byung-il Kwon, Se-hyun Rhyu, 2006, 2006 12th Biennial IEEE Conference on Electromagnetic Field Computation.

Characteristics of the Two-phase Induction Motor By the Inverter Fed Control

Byung-il Kwon, Byoung-Yull Yang, 2005 .

Design of Magnet for a Synchronous Motor with a Self-magnetizing Apparatus

Byung-il Kwon, Dae-Kyong Kim, Byung-Taek, 2008 .

A Cost-Effective, Single-Phase Line-Interactive UPS System that Eliminates Inrush Current Phenomenon for Transformer-Coupled Loads

Thomas A. Lipo, Syed Sabir Hussain Bukhari, Shahid Atiq, 2016 .

Thermal Field Analysis of Main Power Device in a Speed Control System

Baodong Bai, Dezhi Chen, Byung-il Kwon, 2015 .

Optimal Design to Increase Thrust Force in Electro-Magnetic Linear Actuator for Fatigue and Durability Test Machine

Byung-il Kwon, Yong-min You, Yul-kyu Son, 2011, IEEE Transactions on Magnetics.

Design and Optimization of a Novel Wound Field Synchronous Machine for Torque Performance Enhancement

Thomas A. Lipo, Byung-il Kwon, Wenping Chai, 2018 .

Optimal design of dual stator spoke type vernier machine considering armature winding placement

Byung-il Kwon, Jung-Woo Kwon, Salman Khaliq, 2019, International Journal of Applied Electromagnetics and Mechanics.

Design of Novel PM Assisted, Brushless Wound Rotor Synchronous Machine

Thomas A. Lipo, Byung-il Kwon, Qasim Ali, 2015 .

Design and Analysis of a Novel PM-Assisted Synchronous Reluctance Machine With Axially Integrated Magnets by the Finite-Element Method

Thomas A. Lipo, Xiuhe Wang, Byung-il Kwon, 2016, IEEE Transactions on Magnetics.

Design and Analysis of Novel Dual Rotor Axial Field Flux Switching Permanent Magnet Machines

Thomas A. Lipo, Byung-il Kwon, Wenliang Zhao, 2014 .

Design of Single-Phase Line-Start Permanent Magnet Motor Using Equivalent Circuit Method

Byung-il Kwon, Sun-Hyo Kwon, Chul-kyu Lee, 2006 .

Novel matrix converter topologies with reduced transistor count

Thomas A. Lipo, Byung-il Kwon, S. M. Sajjad Hossain Rafin, 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

Optimal Design of a Distributed Winding Type Axial Flux Permanent Magnet Synchronous Generator

Byung-il Kwon, Hai Lin, Yong-Min You, 2012 .

Novel Permanent Magnet Pole Shape for Reducing Cogging Torque and Generating Sinusoidal Back EMF in Surface-mounted PM Motors

Thomas A. Lipo, Byung-il Kwon, Wenliang Zhao, 2013 .

An on-line UPS system that eliminates the inrush current phenomenon while feeding multiple load transformers

Thomas A. Lipo, Syed Sabir Hussain Bukhari, Byung-il Kwon, 2015, 2015 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia).

Cost-effective permanent magnet shape for reducing cogging torque and torque ripple in surface-mounted permanent magnet machines

Thomas A. Lipo, Byung-il Kwon, Wenliang Zhao, 2016 .

Winding Switching and Turn Switching in Permanent Magnet Vernier Machines for Wide Speed Range Operation and High Efficiency

Byung-il Kwon, Noman Baloch, Arsalan Arif, 2019, IEEE Access.

Analysis on a novel Axial Flux Doubly Fed Reluctance Machine

Thomas A. Lipo, Byung-il Kwon, Mohammad Modarres, 2013 .

A study on low-cost sensorless drive of brushless DC motor for compressor using random PWM

Byung-il Kwon, Dae-kyong Kim, Byung-taek Kim, 2007, 2007 International Conference on Electrical Machines and Systems (ICEMS).

Analysis of the novel laminated structure of double excited three-degree-of-freedom motor

Byung-il Kwon, Young-boong Kim, 2010, Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation.

Novel Permanent Magnet Shape for Cogging Torque and Torque Ripple Minimization in Surface-Mounted PM Motors

Thomas A. Lipo, Byung-il Kwon, Wenliang Zhao, 2012 .

Analytical Design of Rotor Magnet Shape of an Ultra-high Speed Three-Phase Axial Permanent Magnet Machine

Thomas A. Lipo, Sunil Kumar, Byung-il Kwon, 2015 .

A Novel Two-phase U-core PMSM with Torque Ripple Reduction Method

Thomas A. Lipo, Fei Zhao, Byung-il Kwon, 2012 .

Transient Behaviour of Double-Conversion On-Line UPS Systems Powering Multiple Load Transformers

Thomas A. Lipo, Syed Sabir Hussain Bukhari, Byung-il Kwon, 2014 .

Flux Weakening Control of PM Machines with Winding Switching and Thyristor Phase Back Control

Thomas A. Lipo, Shahid Atiq, Byung-il Kwon, 2013 .

Optimal design of distributed winding axial flux permanent magnet synchronous generator for wind turbine systems

Byung-il Kwon, Kyu-yun Hwang, Yong-Min You, 2010, Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation.

A novel topology for a voltage source inverter with reduced transistor count and utilizing naturally commutated thyristors with simple commutation

Thomas A. Lipo, Byung-il Kwon, S. M. Sajjad Hossain Rafin, 2014, 2014 International Symposium on Power Electronics, Electrical Drives, Automation and Motion.

Effects of Combined Mode of Operation on Normal Operation of BLDC Motor

Byung-il Kwon, Shahid Atiq, 2012 .

A pole changing vernier machine with consequent pole rotor

Byung-il Kwon, Noman Baloch, 2019, International Journal of Applied Electromagnetics and Mechanics.

Optimal Design of a Spoke-type Permanent Magnet Motor with Phase-group Concentrated-coil Windings to Minimize Torque Pulsations

Thomas A. Lipo, Xiuhe Wang, Byung-il Kwon, 2017 .

A Study on Design of Novel Asymmetrical Rotor Structures to Improve Torque Characteristics in Interior Permanent Magnet Synchronous Motors

Thomas A. Lipo, Byung-il Kwon, Wenliang Zhao, 2014 .

A Study on The Novel Structured 3-DOF Spherical Motor

Dong-Cheol Lee, Byung-il Kwon, Dae-Kyong Kim, 2008 .

Optimum Design for a Double-excitation Spoke-array Permanent Magnet Vernier Machine by Tooth Modification

Thomas A. Lipo, Fei Zhao, Byung-il Kwon, 2013 .

Optimal Design of Ultra-High Speed Axial Flux Permanent Magnet Motor with Sinusoidal Back-EMF

Thomas A. Lipo, Byung-il Kwon, Wenliang Zhao, 2014 .

A novel current control method of a three-leg inverter in the stationary frame for a two-phase AC motor

Dezhi Chen, Byung-il Kwon, Yixiao Luo, 2015, 2015 International Conference on Electrical Drives and Power Electronics (EDPE).

Optimization and analysis of rotor structure for maximum torque control of spoke-type interior permanent magnet synchronous motor

Byung-il Kwon, Kyu-yun Hwang, Yul-kyu Son, 2010, Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation.

Optimal Design of a Spoke-type Permanent Magnet Motor with Phase-group Concentrated-coil Windings to Minimize Torque Pulsations

Thomas A. Lipo, Xiuhe Wang, Byung-il Kwon, 2017, IEEE Transactions on Magnetics.

Design and Analysis of a Two phase Axial Flux SPM BLDC Motor

Thomas A. Lipo, Byung-il Kwon, Tanveer Yazdan, 2016 .

Erratum to "an online ups system that eliminates the inrush current phenomenon while feeding multiple load transformers" [mar/apr 17 1149-1156]

Thomas A. Lipo, Syed Sabir Hussain Bukhari, Byung-il Kwon, 2017 .

High-Efficiency Dual Output Stator-PM Machine for the Two-Mode Operation of Washing Machines

Byung-il Kwon, Jung-Woo Kwon, 2018, IEEE Transactions on Energy Conversion.

An Improved Flux Observer for Sensorless Permanent Magnet Synchronous Motor Drives with Parameter Identification

Hai Lin, Byung-il Kwon, Kyu-yun Hwang, 2013 .

A Dual-Servo Type VCM for a Nano-Level Measurement System

Byung-il Kwon, Yong-Min Yoo, B. Kwon, 2007 .

A Novel SCR-IGBT Based Dual Bridge Matrix Converter With Reduced Number of Switches Using Simple Commutation

Thomas A. Lipo, Byung-il Kwon, S. M. Sajjad Hossain Rafin, 2013 .

Efficiency Improvement for Concentrated Flux IPM Motors for Washing Machines

Byung-il Kwon, Keun-Young Yoon, 2014 .

A novel design method for current limiting circuit of inverter

Baodong Bai, Dezhi Chen, Byung-il Kwon, 2015, 2015 International Conference on Electrical Drives and Power Electronics (EDPE).

Performance comparison of dual airgap and single airgap spoke-type Vernier permanent magnet machines

Thomas A. Lipo, Byung-il Kwon, Wenliang Zhao, 2016, 2016 IEEE Conference on Electromagnetic Field Computation (CEFC).

Rotor pole shape optimization of axial flux dual stator doubly fed synchronous reluctance machine

Thomas A. Lipo, Byung-il Kwon, Salman Khaliq, 2015 .

Analysis of Torque Characteristics for the Single-phase Induction Motor Considering Space Harmonics

Byung-Taek Kim, Byung-il Kwon, Byung-taek Kim, 2006 .

Rotor Pole Design in Spoke Type BLDC Motor by RSM

Byung-il Kwon, Kyu-yun Hwang, Sang-bong Rhee, 2006, 2006 12th Biennial IEEE Conference on Electromagnetic Field Computation.

Analysis and Design of the Single-phase Line Start Permanent Magnet Motor Considering Overhang Effect

Byung-Taek Kim, Byung-il Kwon, Soo-whang Baek, 2009 .

Analysis of radial force as a source of vibration in an induction motor with skewed slots

Byung-il Kwon, Seung-Chan Park, Jung-Pyo Hong, 1997 .

Forward converter analysis by the method of coupling electromagnetic field with hysteresis and circuit equations

Byung-il Kwon, Seung-Chan Park, Seong-Jin Park, 2000 .

Three-level hysteresis current control for a three-phase permanent magnet synchronous motor drive

Hai Lin, T. A. Lipo, Byung-il Kwon, 2012, Proceedings of The 7th International Power Electronics and Motion Control Conference.

Optimization of novel flux barrier in interior permanent magnet-type brushless dc motor based on modified Taguchi method

Sang-Bong Rhee, Byung-il Kwon, Kyu-yun Hwang, 2009 .

Practical Optimum Design Based on Magnetic Balance and Copper Loss Minimization for a Single-Phase Line Start PM Motor

Byung-il Kwon, Soo-whang Baek, Byung-taek Kim, 2011, IEEE Transactions on Magnetics.

Maximum torque control for optimal design to reduce cogging torque in spoke type interior permanent magnet synchronous motor

Byung-il Kwon, Kyu-yun Hwang, Yul-kyu Son, 2010, 2010 IEEE Energy Conversion Congress and Exposition.

Optimal rotor design for reducing the partial demagnetization effect and cogging torque in spoke type PM motor

Sang-Bong Rhee, Byung-Taek Kim, Byung-il Kwon, 2009 .

Optimal Design of Wound Field Synchronous Reluctance Machines to Improve Torque by Increasing the Saliency Ratio

Byung-il Kwon, Wenping Chai, Wenliang Zhao, 2017, IEEE Transactions on Magnetics.

Influence of Space Harmonics on Starting Performance of a Single-Phase Line Start Permanent-Magnet Motor

Byung-Taek Kim, Byung-il Kwon, 2006 .

Measurement research on magnetic properties of electrical sheet steel under different temperature, harmonic and dc bias

Baodong Bai, Byung-il Kwon, Liwei Fang, 2017 .

PM Assisted, Brushless Wound Rotor Synchronous Machine

Thomas A. Lipo, Byung-il Kwon, Qasim Ali, 2016 .

Optimization of 2 phase in-wheel IPMSM for wide speed range by using the Kriging model based on latin hypercube sampling

Byung-il Kwon, Kyu-yun Hwang, Jae-beum Kim, 2010, Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation.

Characteristics of new interior permanent magnet motor using flared-shape arrangement of ferrite magnets

Byung-il Kwon, Keun-Young Yoon, Jin-hee Lee, 2016 .

Influence on brushless DC motor performance due to unsymmetric magnetization distribution in permanent magnet

Byung-il Kwon, Sung Hong Won, Seung-Chan Park, 2000 .

Reduction of electromagnetic force harmonics in asynchronous traction motor by adapting the rotor slot number

Byung-Taek Kim, Byung-il Kwon, Seung-Chan Park, 1999 .

Analytical analysis of the magnetic field and no-load voltage for the double sided axial flux permanent magnet synchronous generator

Byung-il Kwon, Ikram Junaid, Junaid Qudsia, 2010, Digests of the 2010 14th Biennial IEEE Conference on Electromagnetic Field Computation.

Influence of Space Harmonics on Starting Performance Of 1-phase Line Start Permanent Magnet Motor

Byung-il Kwon, Byung-taek Kim, 2006, 2006 12th Biennial IEEE Conference on Electromagnetic Field Computation.

Analysis of exterior-rotor BLDC motor considering the eddy current effect in the rotor steel shell

Byung-il Kwon, Sung Hong Won, Seung-Chan Park, 1999 .

Optimum Design of a Single-Phase Line-Start PM Motor Considering Efficiency, Maximum Torque, and Starting Torque

Byung-il Kwon, Soo-whang Baek, 2012, IEEE Transactions on Magnetics.

Optimal design of motor shape and magnetisation direction to obtain vibration reduction and average torque improvement in IPM BLDC motor

Byung-il Kwon, B. Kwon, Hong-seok Kim, 2017 .

2-D modeling and characteristic analysis of a magnetic position sensor

In-Soung Jung, Byung-il Kwon, Se-Hyun Rhyu, 2005 .

Magnet Flux Focusing Design of Double Stator Permanent Magnet Vernier Machine

Thomas A. Lipo, Fei Zhao, Byung-il Kwon, .

Exciter Design and Characteristic Analysis of a Written-Pole Motor

Byung-Taek Kim, Byung-il Kwon, Se-Hyun Rhyu, 2009 .