Joseph A. Arsecularatne

发表

On the interrelationships of some machinability parameters in finish turning with cermet chip forming tool inserts

I. S. Jawahir, N. Qureshi, Joseph A. Arsecularatne, 1992 .

On prediction of tool life and tool deformation conditions in machining with restricted contact tools

Joseph A. Arsecularatne, J. A. Arsecularatne, 2003 .

On machining of hardened AISI D2 steel with PCBN tools

Joseph A. Arsecularatne, Liangchi Zhang, C. Montross, 2006 .

Prediction of Chip Flow Direction and Cutting Forces in Oblique Machining with Nose Radius Tools

P.L.B. Oxley, Joseph A. Arsecularatne, P. Mathew, 1995 .

Prediction of chip flow direction, cutting forces and surface roughness in finish turning

Joseph A. Arsecularatne, P. Mathew, R. F. Fowle, 1998 .

An FEM Analysis Of Metal Matrix Composite Machining

Joseph A. Arsecularatne, Alokesh Pramanik, Liangchi Zhang, 2006 .

Material Removal Mechanism in Dynamic Friction Polishing of PCD

Joseph A. Arsecularatne, Liangchi Zhang, Yiqing Chen, 2006 .

An Optimal Tool Replacement Strategy for Computer Numerical Controlled Turning Centres

Joseph A. Arsecularatne, P. Mathew, P. Mathew, 1995 .

Nose radius oblique tool: Cutting force and built-up edge prediction

Joseph A. Arsecularatne, P. Mathew, R. F. Fowle, 1996 .

Optimum Cutting Conditions for Turned Components

Joseph A. Arsecularatne, S Hinduja, G Barrow, 1992 .

Prediction of Cutting Forces and Built-Up Edge Formation Conditions in Machining With Oblique Nose Radius Tools

P.L.B. Oxley, Joseph A. Arsecularatne, P. Mathew, 1996 .

Prediction of the cutting conditions giving plastic deformation of the tool in oblique machining

Joseph A. Arsecularatne, P. Mathew, Q. Meng, 1998 .

APPLICATION OF OXLEY MACHINING THEORY TO BORING AND REAMING

Joseph A. Arsecularatne, P. Mathew, I. R. McKendrick, 2001 .

On tool-chip interface stress distributions, ploughing force and size effect in machining

Joseph A. Arsecularatne, 1997 .

Calculation of optimum cutting conditions for turning operations using a machining theory

Joseph A. Arsecularatne, P. Mathew, Q. Meng, 2000 .

Prediction of tool life for restricted contact and grooved tools based on equivalent feed

Joseph A. Arsecularatne, J. A. Arsecularatne, 2004 .

Polishing of polycrystalline diamond by the technique of dynamic friction, part 1: Prediction of the interface temperature rise

Joseph A. Arsecularatne, J. A. Arsecularatne, Liangchi Zhang, 2006 .

Machining of metal matrix composites: effect of ceramic particles on residual stress, surface roughness and chip formation

Joseph A. Arsecularatne, Alokesh Pramanik, Liangchi Zhang, 2008 .

Wear and tool life of tungsten carbide, PCBN and PCD cutting tools

Joseph A. Arsecularatne, J. A. Arsecularatne, Liangchi Zhang, 2006 .

THE OXLEY MODELING APPROACH, ITS APPLICATIONS AND FUTURE DIRECTIONS

Joseph A. Arsecularatne, P. Mathew, P. Mathew, 2000 .

PREDICTION OF TOOL LIFE IN MACHINING WITH RESTRICTED CONTACT TOOLS

Joseph A. Arsecularatne, P. Mathew, P. Mathew, 2000 .