Sung Chul Kim

发表

Jae-ho Kim, Sung Chul Kim, 2014 .

An Analysis Study for Thermal Design of ISG (Integrated Starter & Generator) for Hybrid Electric Vehicle

Sung Chul Kim, Dae Geon Kim, D. Kim, 2013 .

Effects of operating parameters on the performance of a CO2 air conditioning system for vehicles

Sung Chul Kim, Min-Soo Kim, Jong Phil Won, 2009 .

A Study on the Characteristics of Fuel Consumption and Emissions of Diesel Vehicles Using Engine Coolant Flow Rate On/Off Control

Sung Chul Kim, 2013 .

Development of a PTC Heater for Supplementary Heating in a Diesel Vehicle

Sung Chul Kim, Yoon Hyuk Shin, 2014 .

Heating Performance Enhancement of High Capacity PTC Heater with Modified Louver Fin for Electric Vehicles

Sung Chul Kim, Myeong Hyeon Park, M. Park, 2019, Energies.

Analytical Assessment on the Cooling Structure of In-wheel Driving Inverter

Sung Chul Kim, 2014 .

Studies on the Performance Evaluation of Downsized High-efficiency Cooling Module

Sung Chul Kim, Sung Wook Park, Yoon Hyuk Shin, 2011 .

A Study on the Enhancement of the Cooling Structure for In-wheel Motor

Sung Chul Kim, Dae Geon Kim, D. Kim, 2013 .

Studies on the Cooling Performance of Front End Module for Pedestrian Protection

Sung Chul Kim, Yoon Hyuk Shin, S. C. Kim, 2012 .

Effect of Cylinder Air Pressure and Hot Surface Temperature on Ignition Delay of Diesel Spray in a Constant Volume Combustion Chamber

Sung Chul Kim, Mohammad Salman, 2019 .

Studies on the Performance of a Cam Driving Electronic Expansion Valve for Vehicles

Sung Chul Kim, 2016 .

A Study on the Thermo-flow Analysis of ISG (Integrated Starter and Generator) Driving Inverter

Sung Chul Kim, Dae Geon Kim, 2013 .

A Characteristic-Based Technology Measurement With Market Factor Considered

Sung Chul Kim, Pyung Il Yu, 1994 .

A Study on Cooling Performance of In-wheel Motor for Green Car

Sung Chul Kim, Jung Pyo Hong, Jung Hun Jung, 2012 .

Heat Transfer Characteristics of Heat Exchangers for Waste Heat Recovery from a Billet Casting Process

Sung Chul Kim, Ju O Kang, S. C. Kim, 2019, Energies.

Thermal performance of oil spray cooling system for in-wheel motor in electric vehicles

Sung Chul Kim, Dong Hyun Lim, D. Lim, 2014 .

Performance Characteristics of Vehicle Air Conditioning System Using Internal Heat Exchanger with Inner Fin

Sung Chul Kim, 2013 .

Use of electromagnetic clutch water pumps in vehicle engine cooling systems to reduce fuel consumption

Sung Chul Kim, Min-Soo Kim, Yoon Hyuk Shin, 2013 .

Determination of birefringence by Brillouin spectroscopy

Sung Chul Kim, Yun-Sik Yu, Sukmock Lee, 1998, Optics & Photonics.

Thermal Design and Analysis Evaluation of ISG Motor for Hybrid Electric Vehicles considering High-speed Driving Condition

Sung Chul Kim, 2014 .

Determining Multi-Criteria Priorities in the Planning of Electric Power Generation: The Development of an Analytic Hierarchy Process for Using the Opinions of Experts

Sung Chul Kim, Kyung J. Min, 2004 .

Morphology, thermal, and mechanical properties of polyamide 66/clay nanocomposites with epoxy-modified organoclay

Sung Chul Kim, Park Min Gyoo, Sriram Venkataramani, 2006 .

Silver nanowire embedded in P3HT:PCBM for high-efficiency hybrid photovoltaic device applications.

Sung Chul Kim, Chul-Hyun Kim, Sang-Jin Moon, 2011, ACS nano.

Surface structure and phase separation mechanism of polysulfone membranes by atomic force microscopy

Sung Chul Kim, Je Young Kim, Sung Chul Kim, 1999 .

Nanoscale Phase Separation of Sulfonated Poly(arylene ether sulfone) / Poly(ether sulfone) Semi-IPNs for DMFC Membrane Applications

Sung Chul Kim, Yo-Han Kwon, Yo-Han Kwon, 2009 .