Martin B.G. Jun

发表

Dimensional measurement based on rotating wire probe and acoustic emission

S. Elfurjani, A. Bayesteh, S. S. Park, 2015 .

Design and Fabrication of Stent with Negative Poisson’s Ratio

Martin B.G. Jun, S. K. Bhullar, Junghyuk Ko, 2014 .

Numerical Simulation of Chip Ploughing Volume and Forces in 5-axis CNC Micro-milling Using Flat-end Mills

Zuomin Dong, Martin B.G. Jun, Shan Luo, 2016 .

Long period grating inscribed by femtosecond laser for refractive index measurements in aqueous environments

Martin B.G. Jun, Peter Wild, Luis Melo, 2012, Other Conferences.

Modeling and Analysis of the Thread Milling Operation in the Combined Drilling/Thread Milling Process

Anna Carla Araujo, Martin B.G. Jun, 2008 .

From macro to micro, evolution of surface structures on cutting tools: a review

Martin B.G. Jun, Yonghong Fu, Hyung Wook Park, 2019, JMST Advances.

Investigation of the Dynamics of Microend Milling—Part I: Model Development

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2006 .

Micro Flat End Milling Simulation Model With Instantaneous Plowing Area Prediction

Martin B.G. Jun, Junghyuk Ko, Junghyuk Ko, 2016 .

Predictive Maintenance of Machine Tool Systems Using Artificial Intelligence Techniques Applied to Machine Condition Data

John W. Sutherland, Martin B.G. Jun, Hanjun Kim, 2019, Procedia CIRP.

Evaluation of a spindle-based force sensor for monitoring and fault diagnosis of machining operations

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2002 .

Experimental investigation of a combined drilling and thread milling process: Thrilling

Anna Carla Araujo, Martin B.G. Jun, Richard E. DeVor, 2007 .

Performance of Volcano-Like Laser Textured Cutting Tools: An Experimental and Simulative Investigation

Martin B.G. Jun, Yonghong Fu, Xingyu Fu, 2018, Lubricants.

Improvement of Computer-Aided Manufacturing (CAM) Software for Laser Machining

Martin B.G. Jun, Junghyuk Ko, Abdoleza Bayesteh, 2015 .

Investigation of the Dynamics of Microend Milling—Part II: Model Validation and Interpretation

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2006 .

An Acoustic Emission-Based Method for Determining Contact Between a Tool and Workpiece at the Microscale

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2008 .

Modeling of dynamic micro-milling cutting forces

Martin B.G. Jun, Simon S. Park, Simon S. Park, 2009 .

Optimal tool orientation generation and chip volume/cutting force predictions for 5-axis CNC machining of curved surfaces using flat-end mills

Zuomin Dong, Martin B.G. Jun, Shan Luo, 2016 .

Tool wear monitoring of micro-milling operations

Martin B.G. Jun, Simon S. Park, Simon S. Park, 2009 .

Modeling of the Thread Milling Operation in a Combined Thread/Drilling Operation: Thrilling

Anna Carla Araujo, Martin B.G. Jun, A. C. Araujo, 2010 .

STEP-NC feature-oriented high-efficient CNC machining simulation

Qiang Liu, Wenlei Xiao, Gang Zhao, 2020 .

Cutting Mechanisms and Their Influence on Dynamic Forces, Vibrations and Stability in Micro-Endmilling

Martin B.G. Jun, Shiv Gopal Kapoor, Richard E. DeVor, 2004 .

An Automated Patternator System Development

Martin B.G. Jun, Huitaek Yun, Sanghun Shin, 2018 .

A fast tool servo design for precision turning of shafts on conventional CNC lathes

Wen-Hong Zhu, Yusuf Altintas, Martin B.G. Jun, 2001 .

A New Mechanistic Approach for Micro End Milling Force Modeling

Martin B.G. Jun, Simon S. Park, Mohammad Malekian, 2010 .

A model for thread milling cutting forces

Anna Carla Araujo, Martin B.G. Jun, Richard E. DeVor, 2006 .

Fuzzy PWM-PID control of cocontracting antagonistic shape memory alloy muscle pairs in an artificial finger

Martin B.G. Jun, Edward J. Park, Junghyuk Ko, 2011 .

An Experimental Evaluation of an Atomization-Based Cutting Fluid Application System for Micromachining

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2008 .

Characterization of femtosecond laser filament-fringes in titanium

Martin B.G. Jun, Man-Seop Lee, Md. Shamim Ahsan, 2013, Photonics West - Lasers and Applications in Science and Engineering.

An Acoustic Emission-Based Method for Determining Relative Orientation Between a Tool and Workpiece at the Micro-Scale

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2006 .

Estimation of effective error parameters in high-speed micro-endmilling

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2007 .

Interferometric measurement of refractive index modification in a single mode microfiber

Martin B.G. Jun, Farid Ahmed, Vahid Ahsani, 2017, OPTO.

Bragg grating fabrication in microfiber by femtosecond pulse filamentation induced periodic refractive index modification

Martin B.G. Jun, Farid Ahmed, 2015, Photonics West - Lasers and Applications in Science and Engineering.

Numerical simulation of chip ploughing volume in micro ball-end mill machining

Martin B.G. Jun, Zuomin Dong, Junghyuk Ko, 2017 .

Chip volume and cutting force calculations in 5-axis CNC machining of free-form surfaces using flat-end mills

Zuomin Dong, Martin B.G. Jun, Shan Luo, 2017 .

Development of internal sound sensor using stethoscope and its applications for machine monitoring

Martin B.G. Jun, Hanjun Kim, Huitaek Yun, 2020, Procedia Manufacturing.

The effects of end mill alignment errors on vibrations at high spindle speeds

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2004 .

Modeling of minimum uncut chip thickness in micro machining of aluminum

Martin B.G. Jun, Simon S. Park, Simon S. Park, 2012 .

Computer-Aided Manufacturing (CAM) Software Development for Laser Machining

Martin B.G. Jun, Abdolreza Bayesteh, Farid Ahmad, 2013 .

Femtosecond laser based in-fiber long period grating fabrication for improved solution sensing

Martin B.G. Jun, Man-Seop Lee, Md. Shamim Ahsan, 2013, Photonics West - Lasers and Applications in Science and Engineering.

The effects of process faults and misalignments on the cutting force system and hole quality in reaming

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2006 .

Mechanical characterization of auxetic stainless steel thin sheets with reentrant structure

Martin B.G. Jun, Sukhwinder K. Bhullar, Huseyin Lekesiz, 2017 .

Experimental investigation of machinability and tool wear in micro-endmilling

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2008 .

A review on optical fiber sensors for environmental monitoring

Martin B.G. Jun, Byung-Kwon Min, Huitaek Yun, 2018, International Journal of Precision Engineering and Manufacturing-Green Technology.

Characterization of refractive index change and fabrication of long period gratings in pure silica fiber by femtosecond laser radiation

Martin B.G. Jun, Farid Ahmed, Hang Eun Joe, 2015 .

Colorizing stainless steel surface by femtosecond laser induced micro/nano-structures

Martin B.G. Jun, Man-Seop Lee, Md. Shamim Ahsan, 2011 .

Characterization and Auxetic effect of Polytetrafluoroethylene Tubular structure

Martin B.G. Jun, A. Bedeloglu, M. Jun, 2014 .

Effect of tool-tip vibration and stability on acoustic emission generation in micro-endmilling

Martin B.G. Jun, Richard E. DeVor, Shiv Gopal Kapoor, 2007 .