Dong Pyo Hong

发表

Fast Terminal Sliding Mode Control for the Ship Steering Problem

Deok Jin Lee, Kil To Chong, Alick Onesimus Vweza, 2013 .

Quantitative Estimation of the Fastening Condition of a Bolt with Using Piezoceramic (PZT) Sensors

Jae-Yeol Kim, Dong Pyo Hong, Gao Ping Wang, 2007 .

The Analysis of The Dynamic Characteristics on Seed Plate of The Vacuum Planters for Precision Sowing

Dong Pyo Hong, Young-Joo Kim, Jae Wan Lee, 2013 .

Damage Detection and Quantitative Assessment for the Cracked Beam Structures

Dong Pyo Hong, Young Moon Kim, Yong Hong, 2007 .

Design of a Compact 3-DOF In-Plane Motion Stage

Dong Pyo Hong, Jaehyun Park, Dae-Gab Gweon, 2013 .

Optimal Design of Voice Coil Motor for Micro Stage

Dong Pyo Hong, Dae-Gab Gweon, Jae Heon Jeong, 2014 .

Mechanical Efficiency Analysis of Animal Locomotion by Specific Resistance

Sung Ho Park, Dong Pyo Hong, D. Hong, 2013 .

EIGENVALUE PROBLEM OF A STEPPED BEAM WITH A MASS AND A SPRING AT THE END

Dong Pyo Hong, Tae Jin Chung, Chun Seong Yu, 1995 .

Precision displacement measurement using a modulating ESPI

Young June Kang, Seong-Jong Kim, Dong Pyo Hong, 2007, International Symposium on Optomechatronic Technologies.

A Study on the Cutting Characteristics and Detection of the Abnormal Tool State in Turning of Ti-6Al-4V ELI

Seon Woo Park, Dong Pyo Hong, Hyung Gon Shin, 2013 .

Fringe Analysis around an Inclined Crack Tip of Finite-Width Plate under Tensile Load by Photoelastic Phase-Shifting Method

Tae Hyun Baek, Dong Pyo Hong, Byung Hee Lee, 2012 .

The Response Characteristics of Various Impact Patterns on the Smart Bumper of Automotives

Dong Pyo Hong, Gao Ping Wang, Tae Jin Chung, 2009 .

Influence of Non-Gaussian Local Wind Pressures on Fatigue Damage of a Cladding Fastener on a Side Face of a Tall Building

Dong Pyo Hong, Nag Ho Ko, Young Moon Kim, 2007 .

Structural Design of Regenerator CA Nozzle in FCC Unit

Dong Pyo Hong, Sung Mo Yang, Hyun Sik Kim, 2013 .

Optimal Locomotive Parameters of Four-Legged Bio-Robot by Minimizing Energy Consumption

Sung Ho Park, Dong Pyo Hong, 2014 .

Design of a High Force Voice Coil Motor

Dong Pyo Hong, Dae-Gab Gweon, Da Hoon Ahn, 2013 .

Sound Radiation From Beams under the Action of Moving Harmonic Point Forces

Dong Pyo Hong, Byoung Sam Kim, Sin Ho Tae, 1990 .

Design of a 6-DOF VCM-Driven Micro Stage

Dong Pyo Hong, Jae Heon Jeong, Myeong Hyeon Kim, 2014 .

Optimal Locomotive Control Parameters of Biologically Inspired Four-Legged Walking Machine

Sung Ho Park, Dong Pyo Hong, 2014 .

Deformation Behavior and Strength of Beam-To-Column Connections in Steel Portal Frame

Dong Pyo Hong, Nag Ho Ko, Young Moon Kim, 2007 .

Design of a VCM Actuator Using Halbach Magnet Array for Active Vibration Isolation System

Dong Pyo Hong, Dae-Gab Gweon, Myeong Hyeon Kim, 2014 .

Analysis of a 3-DOF Rotationally Symmetric Hinge

Dong Pyo Hong, Dae-Gab Gweon, Jungjae Kim, 2013 .

Fringe Analysis for Photoelasticity Using Image Processing Techniques

Tae Hyun Baek, Dong Pyo Hong, Myung Soo Kim, 2014 .

Composite-Insulated Boom FEM Analysis for the Application of Aerial Work Platform

Seung Ho Hwang, Dong Pyo Hong, Yong Hong, 2012 .

Successive Loop Closure Based Controller Design for an Autonomous Quadrotor Vehicle

Deok Jin Lee, Kil To Chong, Dong Pyo Hong, 2013 .

Multi-Sensor Fusion Based Effective Obstacle Avoidance and Path-Following Technology

Deok Jin Lee, Kil-To Chong, Dong Pyo Hong, 2014 .

Hybrid determination of mixed-mode stress intensity factors on discontinuous finite-width plate by finite element and photoelasticity

Tae Hyun Baek, Dong Pyo Hong, Lei Chen, 2011 .

Damage Identification of Multi-Type Joints with Using Electro-Impedance Method by Smart Sensors

Dong Pyo Hong, Gao Ping Wang, Yong Hong, 2008 .

Investigation of the Local Stress in the FCC Unit (Reactor Riser) Using FEA

Zhao Li, Dong Pyo Hong, Hyun Sik Kim, 2012 .

Navigation of mobile robot using Low-cost GPS

Yuanliang Zhang, Dong Pyo Hong, 2015 .

Square-Structure Estimation of Bolt Fastening Conditions with Using PZT Patches

Dong Pyo Hong, Yong Hong, Young Moon Kim, 2007 .

Design Optimization of Composite-Insulated Telescopic Aerial Boom

Dong Pyo Hong, Yong Hong, Chan Gon Park, 2013 .

Quasi-Static Step Number Determination Method of a Quadruped in Step Crossing

Sung Ho Park, Dong Pyo Hong, 2013 .

Design Optimization of the Aerial Lift Boom through the Finite-Element Analysis (FEA)

Dong Pyo Hong, Yong Hong, Jaejung Lee, 2011 .

Structural Analysis of Boom System in 42m Aerial Platform Truck

Dong Pyo Hong, Young Moon Kim, Yong Hong, 2007 .

The Friction Welding Characteristic Analysis of the Al 7075-T6 According to the Spindle Speed and Upset Pressure

Dong Pyo Hong, Hee Yong Kang, Hyun Sik Kim, 2013 .

Increasing Damping Ratios in a Tuned Liquid Damper Using Damping Bars

Dong Pyo Hong, Young Moon Kim, Ki Pyo You, 2007 .

Locomotive Characteristics of Body and Limb in a Terrestrial Vertebrates

Sung Ho Park, Dong Pyo Hong, 2012 .

The Weight Reduction Design of the Regenerator CA Nozzle in FCC Unit Using the FEA

Dong Pyo Hong, Hyun Sik Kim, Il Taek Lee, 2013 .

Study on Fault Detection and Diagnosis of the Edge-Transmission Ball Mill System

Dong Pyo Hong, Gao Ping Wang, Young Moon Kim, 2007 .

Vibration Analysis of a Large Pressure Vessel Using the FEA

Dong Pyo Hong, Chan Gon Park, Iltaek Lee, 2013 .

Design of the Hybrid-Propeller Shaft Using Composite Materials

Dong Pyo Hong, Hee Yong Kang, Hyun Sik Kim, 2013 .

Infrared Thermographic Diagnosis Mechnism for Fault Detection of Ball Bearing under Dynamic Loading Conditions

Dong Pyo Hong, Wontae Kim, Jin Ju Seo, 2011 .

Dynamic Analysis on the H-Type Stage Using Largrange Method

Dong Pyo Hong, Dae-Gab Gweon, K. H. Kim, 2012 .

A Numerical Approach to Solve Point Kinetic Equations Using Taylor-Lie Series and the Adomian Decomposition Method

Kil To Chong, Dong Pyo Hong, Ganduulga, 2013, MUE.

Simulation to Compensate Ripple of Air Bearing Stage with Flexure Hinge Mechanisms

Dong Pyo Hong, Dae-Gab Gweon, Da Hoon Ahn, 2011 .