Hyun-Jung Kim

发表

Cyclic robot scheduling for 3D printer-based flexible assembly systems

Jun-Ho Lee, Hyun-Jung Kim, Jun-Ho Lee, 2018, Ann. Oper. Res..

Scheduling timed Petri nets with a time-feasible reachability tree

Jun-Ho Lee, Hyun-Jung Kim, Tae-Eog Lee, 2013, 2013 10th IEEE INTERNATIONAL CONFERENCE ON NETWORKING, SENSING AND CONTROL (ICNSC).

Scheduling In-Line Multiple Cluster Tools

Jun-Ho Lee, Hyun-Jung Kim, Tae-Eog Lee, 2015, IEEE Transactions on Semiconductor Manufacturing.

Bounds for parallel machine scheduling with predefined parts of jobs and setup time

Hyun-Jung Kim, Hyun-Jung Kim, 2018, Ann. Oper. Res..

반복 기법을 사용한 영점을 가진 배열 안테나의 패턴 합성 = Synthesis of array antenna pattern with the prescribed nulls by the iterative method

김현정, Hyun-Jung Kim, 1998 .

Exploratory studies on actuated pixels as building blocks for interactive kinetic surfaces = 동적이며 상호작용 가능한 표면의 구성요소인 구동 픽셀에 관한 탐색적 연구

김현정, Hyun-Jung Kim, 2013 .

Implementation of Cyber-Physical Production Systems for Quality Prediction and Operation Control in Metal Casting

Sang Do Noh, Hyun-Jung Kim, Yong-Shin Kang, 2018, Sensors.

Drop Impact Analysis of Plate-type Fuel Assembly in Research Reactor

Byung-Ho Lee, Hyun-Jung Kim, Jae-Yong Oh, 2014 .

Non-cyclic scheduling and timing control of timed Petri nets = 시간을 갖는 페트리 넷의 비주기적 스케줄링 및 시간 제어

김현정, Hyun-Jung Kim, 2013 .

A Hybrid Approach Using Case-based Reasoning and Fuzzy Logic for Corporate Bond Rating

Hyun-Jung Kim, Kyung-shik Shin, 2003 .

Fabrication and Characterization of 2-Wavelength White OLED with Single Emissive Layer

Seong-Yong Yang, Chin-Woo Yi, Hyun-Jung Kim, 2012 .

Scheduling transient periods of dual-armed cluster tools

Jun-Ho Lee, Hyun-Jung Kim, Tae-Eog Lee, 2012, 2012 IEEE International Conference on Mechatronics and Automation.

Evaluation of Liquefaction Mitigation of RAP (Rammed Aggregate Piers)

Kyung-Tae Bae, Hyun-Jung Kim, Kook-Hwan Cho, 2011 .

An Approach to Development of a Framework for Design Assessment using Circulation Data of Apartments

Hyunsoo Lee, Hyun-Jung Kim, Jin Kook Lee, 2015 .

Design Issues for Real-Time Remote Robotic Science Operations Support Tools: Observations from the Field

Terrence Fong, Julie A. Adams, Hyun-Jung Kim, 2016 .

Scheduling cluster tools for concurrent processing of two wafer types with PM sharing

Jun-Ho Lee, Hyun-Jung Kim, Tae-Eog Lee, 2015 .

Optimal scheduling of transient cycles for single-armed cluster tools

Hyun-Jung Kim, Tae-Eog Lee, Dae-Kyu Kim, 2016, 2013 IEEE International Conference on Automation Science and Engineering (CASE).

Scheduling a wet station using a branch and bound algorithm

Jun-Ho Lee, Hyun-Jung Kim, Tae-Eog Lee, 2012, 2012 IEEE International Conference on Systems, Man, and Cybernetics (SMC).

Financial Data Mining Using Time delay Neural Networks

Hyun-Jung Kim, Kyung Shik Shin, 2001 .

Optimum design of vertical pump for avoiding the reed frequency

Hyun-Jung Kim, J. I. Lim, B. G. Choi, 2010 .

다기능 스마트카드를 활용한 온, 오프라인 비즈니스 통합 방안에 관한연구 = A study on the integration solution between online and off-line business using multi functional Smart Card

김현정, Hyun-Jung Kim, 2001 .

Vulnerability analysis of evacuation transportation networks

Jaehoon Lee, Hyun-Jung Kim, Jun Kim, 2019 .

Makespan Analysis of Lot Switching Period in Cluster Tools

Jun-Ho Lee, Hyun-Jung Kim, Jun-Ho Lee, 2016, IEEE Transactions on Semiconductor Manufacturing.

Scheduling Cluster Tools With Ready Time Constraints for Consecutive Small Lots

Jun-Ho Lee, Hyun-Jung Kim, Chihyun Jung, 2013, IEEE Transactions on Automation Science and Engineering.

A Branch and Bound Algorithm for Three-Machine Flow Shop with Overlapping Waiting Time Constraints

Jun-Ho Lee, Hyun-Jung Kim, Jun-Ho Lee, 2017 .

Robot task sequencing for a flexible assembly system with 3D printers

Jun-Ho Lee, Hyun-Jung Kim, 2017, 2017 4th International Conference on Control, Decision and Information Technologies (CoDIT).

Characterizing Token Delays of Timed Event Graphs for $K$- Cyclic Schedules

Ramavarapu S. Sreenivas, Hyun-Jung Kim, Tae-Eog Lee, 2017, IEEE Transactions on Automatic Control.

Schedulability Analysis for Noncyclic Operation of Time-Constrained Cluster Tools With Time Variation

Jun-Ho Lee, Hyun-Jung Kim, Tae-Eog Lee, 2016, IEEE Transactions on Automation Science and Engineering.

Suppression of High Frequency Distortion in the Multiple-Input Current-Mode MAX Circuits by Adjustment of Transconductance

Hyongsuk Kim, Hyun-Jung Kim, In-cheol Kim, 2006 .

Scheduling of cluster tools with ready time constraints for small lot production

Hyun-Jung Kim, Tae-Eog Lee, Tae-Eog Lee, 2011, 2011 IEEE International Conference on Automation Science and Engineering.

Time-Feasible Reachability Tree for Noncyclic Scheduling of Timed Petri Nets

Jun-Ho Lee, Hyun-Jung Kim, Tae-Eog Lee, 2015, IEEE Transactions on Automation Science and Engineering.

임피더를 고려한 강관의 3차원 고주파 유도용접 해석 = Three dimensional analysis of high frequency induction welding of steelpipes with impeder

김현중, Hyun-Jung Kim, 2005 .

Completion Time Analysis of Wafer Lots in Single-Armed Cluster Tools With Parallel Processing Modules

Jun-Ho Lee, Hyun-Jung Kim, Jun-Ho Lee, 2017, IEEE Transactions on Automation Science and Engineering.

A petri net-based modeling and scheduling with a branch and bound algorithm

Jun-Ho Lee, Hyun-Jung Kim, Tae-Eog Lee, 2012, 2012 IEEE International Conference on Systems, Man, and Cybernetics (SMC).

Flutter Suppression of a 3-DOF Airfoil Using CFD/CSD with Integrated Optimal Control Method

Dong-Hyun Kim, Hyun-Jung Kim, 2005 .

Optimal scheduling for sequentially connected cluster tools with dual-armed robots and a single input and output module

Hyun-Jung Kim, Tae-Eog Lee, Dae-Kyu Kim, 2017, Int. J. Prod. Res..

A Study on Recalculating Nuclear Power Generation Costs Considering External Costs

Hyun-Jung Kim, Eric Yee, 2014 .

Scheduling Lot Switching Operations for Cluster Tools

Jun-Ho Lee, Hyun-Jung Kim, Tae-Eog Lee, 2013, IEEE Transactions on Semiconductor Manufacturing.

Spline-based meshfree method with extended basis

Hyun-Jung Kim, Sung-Kie Youn, Zoo-Hwan Hah, 2014, Comput. Aided Geom. Des..

Completion Time Analysis for Automated Manufacturing Systems with Parallel Processing Modules

Jun-Ho Lee, Hyun-Jung Kim, 2018, 2018 IEEE International Conference on Robotics and Automation (ICRA).

Scheduling 3D printers with multiple printing alternatives

Hyun-Jung Kim, Jun Kim, Sang-Soo Park, 2017, 2017 13th IEEE Conference on Automation Science and Engineering (CASE).

Closed-Form Expressions on Lot Completion Time for Dual-Armed Cluster Tools With Parallel Processing Modules

Hyun-Jung Kim, Jun-Ho Lee, 2019, IEEE Transactions on Automation Science and Engineering.

A Branch and Bound Algorithm for Cyclic Scheduling of Timed Petri Nets

Hyun-Jung Kim, Chihyun Jung, Tae-Eog Lee, 2015, IEEE Transactions on Automation Science and Engineering.

소 로트 웨이퍼 제조를 위한 가용시간 제약이 있는 클러스터 장비의 스케줄링 방법 = Scheduling of cluster tools with ready time constraints for small lot wafer fabrication

김현정, Hyun-Jung Kim, 2011 .

Uniform Parallel Machine Scheduling with Dedicated Machines, Job Splitting and Setup Resources

Jun-Ho Lee, Hyun-Jung Kim, Jun-Ho Lee, 2018, 2018 IEEE 14th International Conference on Automation Science and Engineering (CASE).

A study on the mechanically equivalent surrogate plate of U Mo dispersion fuel using tungsten

Kang-Hee Lee, Hyun-Jung Kim, Jeong-Sik Yim, 2019, Nuclear Engineering and Technology.

A Simplified Analog Viterbi Decoder with Input Circular Buffer Architecture

Hyongsuk Kim, Hyun-Jung Kim, Hongrak Son, 2007 .

Non-Cyclic Scheduling of a Wet Station

Jun-Ho Lee, Hyun-Jung Kim, Tae-Eog Lee, 2014, IEEE Transactions on Automation Science and Engineering.

Design of the Viterbi Decoder for PRML using Analog Parallel Processing Circuits

Hyongsuk Kim, Hyun-Jung Kim, Hongrak Son, 2006 .

Scheduling Cluster Tools for Concurrent Processing of Two Wafer Types

Jun-Ho Lee, Hyun-Jung Kim, Tae-Eog Lee, 2014, IEEE Transactions on Automation Science and Engineering.

Scheduling dual-armed cluster tools with cleaning processes

Heejung Kim, Hyun-Jung Kim, Tae-Eog Lee, 2013 .

Rescheduling of flexible flow shop with sequence-dependent setup times and job splitting

Hyun-Jin Jung, Hyun-Jung Kim, Jun Kim, 2017, 2017 Winter Simulation Conference (WSC).

A FRAMEWORK FOR PERFORMANCE ANALYSIS OF DISPATCHING RULES IN MANUFACTURING SYSTEMS

Yun Bae Kim, Hyun-Jung Kim, Jun Kim, 2018, 2018 Winter Simulation Conference (WSC).

Scheduling in-line mulitple cluster tools: A decomposition approach

Jun-Ho Lee, Hyun-Jung Kim, Tae-Eog Lee, 2012, 2012 IEEE International Conference on Mechatronics and Automation.

Noncyclic Scheduling of Cluster Tools With a Branch and Bound Algorithm

Jun-Ho Lee, Hyun-Jung Kim, Tae-Eog Lee, 2015, IEEE Transactions on Automation Science and Engineering.

Minimization of Waiting Time Variation in a Generalized Two-Machine Flowshop With Waiting Time Constraints and Skipping Jobs

Tae-Sun Yu, Hyun-Jung Kim, Tae-Eog Lee, 2017, IEEE Transactions on Semiconductor Manufacturing.

Three-machine flow shop scheduling with overlapping waiting time constraints

Jun-Ho Lee, Hyun-Jung Kim, Jun-Ho Lee, 2019, Comput. Oper. Res..

Two-stage lot scheduling with waiting time constraints and due dates

Tae-Sun Yu, Hyun-Jung Kim, Tae-Eog Lee, 2013, 2013 Winter Simulations Conference (WSC).

Scheduling Single-Armed Cluster Tools With Chamber Cleaning Operations

Tae-Sun Yu, Hyun-Jung Kim, Tae-Eog Lee, 2018, IEEE Transactions on Automation Science and Engineering.

Makespan computation of lot switching period in single-armed cluster tools

Jun-Ho Lee, Hyun-Jung Kim, Jun-Ho Lee, 2015, 2015 Winter Simulation Conference (WSC).