A. Erman Tekkaya

发表

Analysis of the Hydraulic Bulge Test with FEA Concerning the Accuracy of the Determined Flow Curves

Alexander Brosius, Alper Güner, A. Erman Tekkaya, 2009 .

Accurate springback prediction in deep drawing using pre-strain based multiple cyclic stress–strain curves in finite element simulation

Alper Güner, A. Erman Tekkaya, Hamad ul Hassan, 2016 .

The Impact of Torsion on the Bending Curve during 3D Bending of Thin-Walled Tubes - A Case Study on Forming Helices

Daniel Staupendahl, Christoph Becker, A. Erman Tekkaya, 2015 .

Numerical Investigation of the Incremental Tube Forming Process

Sami Chatti, Matthias Hermes, Christoph Becker, 2013 .

Lithe and Lissom – From the Hands of Robots

Michael Marré, A. Erman Tekkaya, Daniel Pietzka, 2011 .

A comparison of orthogonal cutting data from experiments with three different finite element models

S. Engin Kilic, A. Erman Tekkaya, Halil Bil, 2004 .

Augmented Reality Application for the Mobile Measurement of Strain Distributions

Joshua Grodotzki, Alessandro Selvaggio, Siddharth Upadhya, 2020, REV.

Modeling Flexforming (Fluid Cell Forming) Process with Finite Element Method

A. Erman Tekkaya, H. Ali Hatipoğlu, Naki Polat, 2007 .

Investigation of the effects of process and geometrical parameters on formability in tube hydroforming using a modular hydroforming tool

Daniel Staupendahl, Andreas Henke, A. Erman Tekkaya, 2018 .

TeachING-LearnING.EU discussions - Innovationen für die Zukunft der Lehre in den Ingenieurwissenschaften

Dominik May, Sabina Jeschke, Marcus Petermann, 2013 .