Jiawei Xiang

发表

Method using L-kurtosis and enhanced clustering-based segmentation to detect faults in axial piston pumps

Qiang Gao, Jiawei Xiang, Shumin Hou, 2021 .

Convolutional neural network-based hidden Markov models for rolling element bearing fault identification

Shuhui Wang, Jiawei Xiang, Yongteng Zhong, 2017, Knowl. Based Syst..

A multi-sensor fault detection strategy for axial piston pump using the Walsh transform method

Qiang Gao, Jiawei Xiang, Yongteng Zhong, 2018, Int. J. Distributed Sens. Networks.

Nonlinear Squeezing Time-Frequency Transform and Application in Rotor Rub-Impact Fault Diagnosis

Shibin Wang, Xuefeng Chen, Baoqing Ding, 2017 .

A personalized diagnosis method to detect faults in gears using numerical simulation and extreme learning machine

Haizhou Huang, Xiaoyang Liu, Jiawei Xiang, 2020, Knowl. Based Syst..

Kernel regression residual decomposition-based synchroextracting transform to detect faults in mechanical systems.

Jiawei Xiang, Hui Liu, J. Xiang, 2019, ISA transactions.

A Two‐Dimensional Plum‐Blossom Sensor Array‐Based Multiple Signal Classification Method for Impact Localization in Composite Structures

Jiawei Xiang, Yongteng Zhong, J. Xiang, 2016, Comput. Aided Civ. Infrastructure Eng..

A Simulation Based Band-Pass Filter to Improve the Polynomial Chirplet Transform in Fault Detection

Lu Wang, Jiawei Xiang, J. Xiang, 2018, 2018 Prognostics and System Health Management Conference (PHM-Chongqing).

Quantitative Identification of Rotor Cracks Based on Finite Element of B-spline Wavelet on the Interval

Zhengjia He, Bing Li, Xuefeng Chen, 2009, Int. J. Wavelets Multiresolution Inf. Process..

A two-stage vision-based method for measuring the key parameters of ball screws

Binqiang Chen, Jiawei Xiang, Yuqing Zhou, 2020 .

Rolling bearing fault diagnosis approach using probabilistic principal component analysis denoising and cyclic bispectrum

Jiawei Xiang, Yanxue Wang, Bingzhen Jiang, 2016 .

A hybrid of FEM simulations and generative adversarial networks to classify faults in rotor-bearing systems.

Yun Gao, Xiaoyang Liu, Jiawei Xiang, 2020, ISA transactions.

Three-Dimensional Finite Element Model of Mandibular Complete Overdenture and Its Biomechanical Characteristics

Jiawei Xiang, Hai-Shen Zhi, Yong-Teng Zhong, 2009 .

Autoregressive model‐enhanced variational mode decomposition for mechanical fault detection

Jiawei Xiang, Hui Liu, J. Xiang, 2019, IET Science, Measurement & Technology.

Adaptive Wavelet Finite Element Method for Partial Differential Equation

Yan Tang, Jiawei Xiang, Fangyong Ye, 2011 .

Study on modern spectrum analysis system for mechanical fault diagnosis

Yan Tang, Jiawei Xiang, Fangyong Ye, 2010, 2010 International Conference on Intelligent Computing and Integrated Systems.

Optimization of VMD using kernel-based mutual information for the extraction of weak features to detect bearing defects

Jiawei Xiang, Anil Kumar, Yuqing Zhou, 2021 .

A Two-Stage Method Using Spline-Kernelled Chirplet Transform and Angle Synchronous Averaging to Detect Faults at Variable Speed

Lu Wang, Jiawei Xiang, 2019, IEEE Access.

Asymmetric penalty sparse model based cepstrum analysis for bearing fault detections

Jiawei Xiang, Yi Liu, Zhansi Jiang, 2020 .

Crack detection in a shaft by combination of wavelet-based elements and genetic algorithm

Zhengjia He, Jiawei Xiang, Yongteng Zhong, 2008 .

Improved deep convolution neural network (CNN) for the identification of defects in the centrifugal pump using acoustic images

Jiawei Xiang, Rajesh Kumar, Anil Kumar, 2020 .

Improved CNN for the diagnosis of engine defects of 2-wheeler vehicle using wavelet synchro-squeezed transform (WSST)

Jiawei Xiang, Yuqing Zhou, Anil Kumar, 2020, Knowl. Based Syst..

Multiple Damage Detection Method for Beams Based on Multi-Scale Elements Using Hermite Cubic Spline Wavelet

Jiawei Xiang, Ming Liang, M. Liang, 2011 .

Multivariate Wavelet Denoising Method Based on Synchrosqueezing for Rolling Element Bearing Fault Diagnosis

Jiawei Xiang, Hui Liu, J. Xiang, 2018, 2018 International Conference on Sensing,Diagnostics, Prognostics, and Control (SDPC).

A Personalized Diagnosis Method to Detect Faults in a Bearing Based on Acceleration Sensors and an FEM Simulation Driving Support Vector Machine

Haizhou Huang, Jiawei Xiang, Xiaoyang Liu, 2020, Sensors.

Application of local mean decomposition to the surveillance and diagnostics of low-speed helical gearbox

Yanyang Zi, Jiawei Xiang, Yanxue Wang, 2012 .

A fault detection strategy using the enhancement ensemble empirical mode decomposition and random decrement technique

Jiawei Xiang, Yongteng Zhong, J. Xiang, 2017, Microelectron. Reliab..

Structural Dynamical Monitoring and Fault Diagnosis

Yaguo Lei, Haifeng Gao, Jiawei Xiang, 2015 .

Experimental investigation of frequency-based multi-damage detection for beams using support vector regression

Ming Liang, Jiawei Xiang, Jiawei Xiang, 2014 .

FEM Simulation-Based Generative Adversarial Networks to Detect Bearing Faults

Xiaoyang Liu, Jiawei Xiang, Yun Gao, 2020, IEEE Transactions on Industrial Informatics.

A Method Using EEMD and L-Kurtosis to Detect Faults in Roller Bearings

Qiang Gao, Jiawei Xiang, 2018, 2018 Prognostics and System Health Management Conference (PHM-Chongqing).

A two-step approach to multi-damage detection for plate structures

Ming Liang, Jiawei Xiang, Jiawei Xiang, 2012 .

Pipe Damage Detection Method Based on BSWI and SVR

Jiawei Xiang, Yongteng Zhong, J. Xiang, 2010, 2010 International Conference on Measuring Technology and Mechatronics Automation.

Solving diffusion equation using wavelet method

Xuefeng Chen, Jiawei Xiang, Xuefeng Chen, 2011, Appl. Math. Comput..

Optimization for a Locally Resonant Phononic Crystal of Square Spiral With Circle Inside

Jiawei Xiang, Hang Xiang, Xingfu Ma, 2019, IEEE Access.

A simulation model based fault diagnosis method for bearings

Jiawei Xiang, Yongteng Zhong, Wenlei Song, 2018, J. Intell. Fuzzy Syst..

A minimum entropy deconvolution-enhanced convolutional neural networks for fault diagnosis of axial piston pumps

Shuhui Wang, Jiawei Xiang, J. Xiang, 2019, Soft Computing.

A novel health indicator developed using filter-based feature selection algorithm for the identification of rotor defects

Yi Liu, Xiaoyang Liu, Jiawei Xiang, 2020, Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability.

Mid-frequency dynamic characteristics prediction of thin plate based on B-spline wavelet on interval finite element method

Xuefeng Chen, Jiawei Xiang, Xingwu Zhang, 2018, Applied Mathematical Modelling.

Structural health monitoring for mechanical structures using multi-sensor data

Jiawei Xiang, Zhibo Yang, José Aguilar, 2018, Int. J. Distributed Sens. Networks.

A novel model for predicting thermoelastohydrodynamic lubrication characteristics of slipper pair in axial piston pump

Jiawei Xiang, Yan Ren, Hesheng Tang, 2017 .

Wavelet‐Based Detection of Beam Cracks Using Modal Shape and Frequency Measurements

Ming Liang, Jiawei Xiang, M. Liang, 2012, Comput. Aided Civ. Infrastructure Eng..

Ensemble deep transfer learning driven by multisensor signals for the fault diagnosis of bevel-gear cross-operation conditions

Jiawei Xiang, ZiYang Di, HaiDong Shao, 2020, Science China Technological Sciences.

Synchrosqueezing transform based general linear chirplet transform of instantaneous rotational frequency estimation for rotating machines with speed variations

Gang Wang, Jiawei Xiang, Yi Liu, 2020, 2020 Asia-Pacific International Symposium on Advanced Reliability and Maintenance Modeling (APARM).

TAM and MUSIC Approach for Impact-Source Localization under Deformation Conditions

Jiawei Xiang, Yongteng Zhong, Zhenghao Zhang, 2020, Sensors.

A data indicator-based deep belief networks to detect multiple faults in axial piston pumps

Jiawei Xiang, Yongteng Zhong, Wang Shuhui, 2018, Mechanical Systems and Signal Processing.

Personalized Fault Diagnosis Method Based on FEM Simulation Driving Machine Learning

Xiaoyang Liu, Jiawei Xiang, 2020 .

Latest developments in gear defect diagnosis and prognosis: A review

Jiawei Xiang, Rajesh Kumar, Yuqing Zhou, 2020 .

Nonlinear Dynamic Analysis of a Trochoid Cam Gear

Jiawei Xiang, Yuqing Zhou, Fengping Li, 2020 .

Investigation on LIGA-like process based on multilevel imprint lithography

Bingheng Lu, Yucheng Ding, Jiawei Xiang, 2009, Microelectron. J..

Bearing damage detection method based on second order cyclic statistic

Yi Liu, Jiawei Xiang, 2010, 2010 Seventh International Conference on Fuzzy Systems and Knowledge Discovery.

An Adaptive Cross-Validation Thresholding De-Noising Algorithm for Fault Diagnosis of Rolling Element Bearings Under Variable and Transients Conditions

Jiawei Xiang, Yi Liu, Zhansi Jiang, 2020, IEEE Access.

Experimental Investigation for Fault Diagnosis Based on a Hybrid Approach Using Wavelet Packet and Support Vector Classification

Pengfei Li, Jiawei Xiang, Yongying Jiang, 2014, TheScientificWorldJournal.

Implementation of autofocus in alignment system for layered imprint fabrication

Bingheng Lu, Jiawei Xiang, Lianfa Yang, 2009 .

Impact localization on composite structures using time difference and MUSIC approach

Jiawei Xiang, Yongteng Zhong, 2017 .

A Method Using Numerical Simulation and Support Vector Machine to Detect Faults in Bearings

Jiawei Xiang, Wenlei Song, 2017, 2017 International Conference on Sensing, Diagnostics, Prognostics, and Control (SDPC).

Compressed sparse time–frequency feature representation via compressive sensing and its applications in fault diagnosis

Shuilong He, Jiawei Xiang, Yanxue Wang, 2015 .

A two-stage algorithm of railway sleeper crack detection based on edge detection and CNN

Gang Wang, Jiawei Xiang, Yi Liu, 2020, 2020 Asia-Pacific International Symposium on Advanced Reliability and Maintenance Modeling (APARM).

A novel wavelet-based finite element method for the analysis of rotor-bearing systems

Zhengjia He, Xuefeng Chen, Jiawei Xiang, 2009 .

Generative Adversarial Networks Enhanced Extreme Learning Machine to Classify Faults in Rolling Bearings

Yun Gao, Jiawei Xiang, J. Xiang, 2020, Advances in Asset Management and Condition Monitoring.

A Novel Personalized Diagnosis Methodology Using Numerical Simulation and an Intelligent Method to Detect Faults in a Shaft

Jiawei Xiang, Yongteng Zhong, J. Xiang, 2016 .

Bearing defect size assessment using wavelet transform based Deep Convolutional Neural Network (DCNN)

Jiawei Xiang, Rajesh Kumar, Yuqing Zhou, 2020 .

A two-step method using Duffing oscillator and stochastic resonance to detect mechanical faults

Jiawei Xiang, Yongteng Zhong, 2016, 2016 IEEE International Instrumentation and Measurement Technology Conference Proceedings.

Damage detection method for wind turbine blades based on dynamics analysis and mode shape difference curvature information

Yanfeng Wang, Jiawei Xiang, Ming Liang, 2014 .

An intelligent fault diagnosis approach based on Dempster-Shafer theory for hydraulic valves

Jiawei Xiang, Hesheng Tang, Yan Ren, 2020 .

A new fault detection strategy using the enhancement ensemble empirical mode decomposition

Jiawei Xiang, Yongteng Zhong, J. Xiang, 2017 .

Fault diagnosis of rolling bearing based on second generation wavelet denoising and morphological filter

Jiawei Xiang, Yongteng Zhong, Wenlei Song, 2015 .

A Strategy Using Variational Mode Decomposition, L-Kurtosis and Minimum Entropy Deconvolution to Detect Mechanical Faults

Hui Liu, Jiawei Xiang, J. Xiang, 2019, IEEE Access.

A Walsh Transform Method to Detect Faults in Mechanical Systems

Qiang Gao, Jiawei Xiang, 2017, 2017 International Conference on Sensing, Diagnostics, Prognostics, and Control (SDPC).

A study of multiscale wavelet-based elements for adaptive finite element analysis

Zhengjia He, Jiawei Xiang, Xuefeng Chen, 2010, Adv. Eng. Softw..

Impact energy level assessment of composite structures using MUSIC‐ANN approach

Jiawei Xiang, Yongteng Zhong, Yuqing Zhou, 2016 .

A Spare Support Vector Machine Based Fault Detection Strategy on Key Lubricating Interfaces of Axial Piston Pumps

Bing Xu, Jiawei Xiang, Shaogan Ye, 2019, IEEE Access.

Structural Topology Optimization Based on the Level SetMethod Using COMSOL

Jiawei Xiang, Yongteng Zhong, Shaohua Zhang, 2014 .

Kernel flexible and displaceable convex hull based tensor machine for gearbox fault intelligent diagnosis with multi-source signals

Yu Yang, Haidong Shao, Junsheng Cheng, 2020 .

Fatigue life prediction in plate structure based on crack propagation

Jiawei Xiang, Ahui Yuan, 2017 .

Rolling element bearing fault detection using PPCA and spectral kurtosis

Jiawei Xiang, Yongteng Zhong, Haifeng Gao, 2015 .

Fault diagnosis of rolling element bearing based on symmetric cross entropy of neutrosophic sets

Jiawei Xiang, Yuqing Zhou, Hesheng Tang, 2020 .

B-spline wavelet boundary element method for three-dimensional problems

Jiawei Xiang, Qi Wei, J. Xiang, 2021, Acta Mechanica.

Hankel Matrix-Based Condition Monitoring of Rolling Element Bearings: An Enhanced Framework for Time-Series Analysis

Binqiang Chen, Jiawei Xiang, Yuqing Zhou, 2021, IEEE Transactions on Instrumentation and Measurement.

Sample Augmentation for Intelligent Milling Tool Wear Condition Monitoring Using Numerical Simulation and Generative Adversarial Network

Bintao Sun, Jiawei Xiang, Yuqing Zhou, 2021, IEEE Transactions on Instrumentation and Measurement.

Two-Dimensional Boundary Element Method Using Interval B-Spine Wavelet

Jiawei Xiang, Qi Wei, 2021 .

Novel Convolutional Neural Network (NCNN) for the Diagnosis of Bearing Defects in Rotary Machinery

Adam Glowacz, Jiawei Xiang, Yuqing Zhou, 2021, IEEE Transactions on Instrumentation and Measurement.

Automatic Smoke Detection Based on SLIC-DBSCAN Enhanced Convolutional Neural Network

Jiawei Xiang, Dali Sheng, Jinlian Deng, 2021, IEEE Access.

Fault diagnosis of angle grinders and electric impact drills using acoustic signals

Wahyu Caesarendra, Adam Glowacz, Miroslav Gutten, 2021 .

Sparse transfer learning for identifying rotor and gear defects in the mechanical machinery

Jiawei Xiang, Hesheng Tang, C. P. Gandhi, 2021, Measurement.

Remain useful life prediction of rolling bearings based on exponential model optimized by gradient method

Jiawei Xiang, Gang Wang, J. Xiang, 2021 .

DSmT-based three-layer method using multi-classifier to detect faults in hydraulic systems

Jiawei Xiang, Hesheng Tang, Yan Ren, 2021 .

A Statistical Image Feature-Based Deep Belief Network for Fire Detection

Jiawei Xiang, Wei Zhang, Jie Cai, 2021, Complex..

Kernel Regression Residual Decomposition Method to Detect Rolling Element Bearing Faults

Jiawei Xiang, Wei Zhang, Weisheng Zhao, 2021 .

Kernel regression residual signal-based improved intrinsic time-scale decomposition for mechanical fault detection

Jiawei Xiang, Hui Liu, J. Xiang, 2018, Measurement Science and Technology.

Experiments on crack identification in cantilever beams

Zhengjia He, Jiawei Xiang, Xuefeng Chen, 2005 .

An efficient wavelet finite element method in fault prognosis of incipient crack

Bing Li, Zhengjia He, Jiawei Xiang, 2006 .

Detect damages in conical shells using curvature mode shape and wavelet finite element method

Jiawei Xiang, Yanxue Wang, Toshiro Matsumoto, 2013 .

A Hybrid of Interval Wavelets and Wavelet Finite Element Model for Damage Detection in Structures

Jiawei Xiang, Yanxue Wang, Toshiro Matsumoto, 2011 .

Construction and Application of Multivariable Wavelet Finite Element for Flat Shell Analysis

Robert X. Gao, Jiawei Xiang, Xingwu Zhang, 2018, Acta Mechanica Solida Sinica.

Theoretical investigation of the contributions of the excitation forces to the vibration of an axial piston pump

Shiqiang Zhu, Jiawei Xiang, Shaogan Ye, 2019, Mechanical Systems and Signal Processing.

Variational mode decomposition based symmetric single valued neutrosophic cross entropy measure for the identification of bearing defects in a centrifugal pump

Jiawei Xiang, Rajesh Kumar, Yuqing Zhou, 2020 .

The construction of plane elastomechanics and Mindlin plate elements of B-spline wavelet on the interval

Zhengjia He, Jiawei Xiang, Xuefeng Chen, 2006 .

Structural Topology Optimization Based on the Level Set Method Using COMSOL

Jiawei Xiang, Yongteng Zhong, J. Xiang, 2014 .

An online debris sensor system with vibration resistance for lubrication analysis.

Jiawei Xiang, Yanxue Wang, Yongbin Ding, 2016, The Review of scientific instruments.

A simple method to detect cracks in beam-like structures

Jiawei Xiang, Yanxue Wang, Toshiro Matsumoto, 2012 .

Experimental investigation on the sharpness reduction of an axial piston pump with reinforced shell

Shiqiang Zhu, Jiawei Xiang, Shaogan Ye, 2018, Applied Acoustics.

Sound quality evaluation and prediction for the emitted noise of axial piston pumps

Shiqiang Zhu, Jiawei Xiang, Shaogan Ye, 2019, Applied Acoustics.

Identification of a crack in a beam based on the finite element method of a B-spline wavelet on the interval

Bing Li, Zhengjia He, Jiawei Xiang, 2006 .

A new method to detect cracks in plate-like structures with though-thickness cracks

Haifeng Gao, Jiawei Xiang, Yanxue Wang, 2014 .

A Class of Wavelet-Based Rayleigh-Euler Beam Element for Analyzing Rotating Shafts

Jiawei Xiang, Xuefeng Chen, Zhansi Jiang, 2011 .

Static and vibration analysis of thin plates by using finite element method of B-spline wavelet on the interval

Zhengjia He, Jiawei Xiang, Xuefeng Chen, 2007 .

A dynamic multiscale lifting computation method using Daubechies wavelet

Bing Li, Zhengjia He, Jiawei Xiang, 2006 .

Experimental investigation on the noise reduction of an axial piston pump using free-layer damping material treatment

Shiqiang Zhu, Jiawei Xiang, Shaogan Ye, 2018, Applied Acoustics.

On the performance of superposition window

Jiawei Xiang, Yanxue Wang, Zhanshi Jiang, 2012 .

Numerical Simulation of Plane Crack Using Hermite Cubic Spline Wavelet

Jiawei Xiang, Yanxue Wang, Guang Ma, 2012 .

A mechanical fault detection strategy based on the doubly iterative empirical mode decomposition

Jiawei Xiang, Shaogan Ye, Bing Xu, 2019 .

THE CONSTRUCTION OF TWO-DIMENSIONAL PLANE ELASTICITY ELEMENT USING B-SPLINE WAVELET ON THE INTERVAL

Bing Li, Zhengjia He, Jiawei Xiang, 2005 .

The construction of 1D wavelet finite elements for structural analysis

Zhengjia He, Jiawei Xiang, Hongbo Dong, 2007 .

Identification of crack in a rotor system based on wavelet finite element method

Zhengjia He, Jiawei Xiang, Xuefeng Chen, 2007 .

A theoretical dynamic model to study the vibration response characteristics of an axial piston pump

Jiawei Xiang, Shaogan Ye, Bing Xu, 2021 .

Impact of the thermal effect on the load-carrying capacity of a slipper pair for an aviation axial-piston pump

Jiawei Xiang, Jun Chen, Hesheng Tang, 2017 .

Minimum entropy deconvolution based on simulation-determined band pass filter to detect faults in axial piston pump bearings.

Jiawei Xiang, Yongteng Zhong, Hesheng Tang, 2019, ISA transactions.

Band Structures Analysis Method of Two-Dimensional Phononic Crystals Using Wavelet-Based Elements

Jiawei Xiang, Yongteng Zhong, J. Xiang, 2017 .

Vibration signals denoising using minimum description length principle for detecting impulsive signatures

Zhengjia He, Jiawei Xiang, Yanxue Wang, 2014 .

A time–frequency-based maximum correlated kurtosis deconvolution approach for detecting bearing faults under variable speed conditions

Jiawei Xiang, Yi Liu, Lu Wang, 2019, Measurement Science and Technology.

BEM-based analysis of elastic banded material by using a contour integral method

Haifeng Gao, Jiawei Xiang, Toshiro Matsumoto, 2015 .

Study on damage detection software of beam-like structures

Jiawei Xiang, Yanxue Wang, Xuefeng Chen, 2011 .

Milling stability prediction and adaptive chatter suppression considering helix angle and bending

Hongrui Cao, Jiawei Xiang, Xingwu Zhang, 2018 .

Construction of Wavelet-Based Elements for Static and Stability Analysis of Elastic Problems

Jiawei Xiang, Yongteng Zhong, 2011 .

Adaptive multiresolution finite element method based on second generation wavelets

Zhengjia He, Jiawei Xiang, Xuefeng Chen, 2007 .