Zhenyu Shi

发表

Development of a micropump composed of three gears with Logix tooth profiles fabricated by micromilling technology

Yi Wan, Xianzhi Zhang, Zhenyu Shi, 2017 .

Optimum end milling tool path and machining parameters for micro Laval nozzle manufacturing

Qinghua Song, Zhanqiang Liu, Yi Wan, 2017 .

The actual geometry of the cutting tool involved in machining

Zhanqiang Liu, Zhenyu Shi, 2010 .

Fluid mechanics of internal flow with friction and cutting strategies for micronozzles

Yi Wan, Qinghua Song, Zhanqiang Liu, 2015 .

Chatter stability for micromilling processes with flat end mill

Qinghua Song, Zhanqiang Liu, Zhenyu Shi, 2014 .

Determination of minimum uncut chip thickness during micro-end milling Inconel 718 with acoustic emission signals and FEM simulation

Zhanqiang Liu, Zhenyu Shi, Yuchao Li, 2018 .

Optimization of machining parameters for micro-machining nozzle based on characteristics of surface roughness

Qinghua Song, Zhanqiang Liu, Yi Wan, 2015, The International Journal of Advanced Manufacturing Technology.

Proper selection of cutting parameters and cutting tool angle to lower the specific cutting energy during high speed machining of 7050-T7451 aluminum alloy

Yi Wan, Qinghua Song, Bing Wang, 2016 .

Influence of machined surface roughness on thrust performance of micro-nozzle manufactured by micro-milling

Yi Wan, Qinghua Song, Zhanqiang Liu, 2016 .

Analytical modeling and experimental investigation of tool and workpiece temperatures for interrupted cutting 1045 steel by inverse heat conduction method

Yi Wan, Zhanqiang Liu, Fulin Jiang, 2013 .

Residual surface topology modeling and simulation analysis for micro-machined nozzle

Yi Wan, Qinghua Song, Zhanqiang Liu, 2015 .

Effects of micro-milled malposed dimple structures on tribological behavior of Al-Si alloy under droplet lubricant condition

Zhanqiang Liu, Zhenyu Shi, Zhanqiang Liu, 2018 .

Experimental investigation of cutting tool temperature during slot milling of AerMet 100 steel

Yi Wan, Zhanqiang Liu, Fulin Jiang, 2016 .

Finite element simulation of machining of Ti-6Al-4V alloy with thermodynamical constitutive equation

Yi Wan, Zhanqiang Liu, Fang Shao, 2010 .