Richard E. DeVor

发表

Dual-mechanism approach to the prediction of machining forces: Part 1 - model development and calibration

William J. Endres, Richard E. DeVor, Shiv Gopal Kapoor, 1993 .

APPLICATION OF DYNAMIC DATA SYSTEM TO THE INDENTIFICATION OF CUTTING FORCE SIGNATURES IN END MILLING.

Richard E. DeVor, Shiv Gopal Kapoor, 1981 .

Agile manufacturing research: accomplishments and opportunities

Richard E. DeVor, R. J. Graves, John J. Mills, 1997 .

Machining Process Models for Product and Process Design

Placid Mathew Ferreira, John W. Sutherland, Richard E. DeVor, 1988 .

OPTIMAL DESIGN OF TOOTH SPACING IN FACE MILLING VIA A DYNAMIC FORCE MODEL.

Richard E. DeVor, Shiv Gopal Kapoor, H. J. Fu, 1984 .

Micromanufacturing: International research and development

Thomas R. Kurfess, Kornel Ehmann, Kamlakar P Rajurkar, 2007 .

An enhanced computer-based process simulation model for the cylinder boring process

Richard E. DeVor, Shiv Gopal Kapoor, Richard D. Skarvan, 1991 .

INTEGRATED QUALITY SYSTEMS AND ASSEMBLY LINES.

Richard E. DeVor, Shiv Gopal Kapoor, M. I. Dessouky, 1984 .

A process-model based methodology for comprehensive process planning of contour turning operations

Richard E. DeVor, Shiv Gopal Kapoor, O. Burak Ozdoganlar, 2003 .

Transforming the Landscape of Manufacturing: Distributed Manufacturing Based on Desktop Manufacturing (DM)2

Jian Cao, Kornel Ehmann, Richard E. DeVor, 2012 .

Development of an automated microfactory: Part 2 - Experimentation and analysis

Richard E. DeVor, Shiv Gopal Kapoor, Andrew Honegger, 2006 .

An Integrated Quality Systems Approach to Quality and Productivity Improvement in Continuous Manufacturing Processes

Richard E. DeVor, Shiv Gopal Kapoor, Kevin J. Dooley, 1986 .

DEVELOPMENT OF MECHANISTIC MODELS FOR THE PREDICTION OF MACHINING PERFORMANCE: MODEL BUILDING METHODOLOGY

Richard E. DeVor, Shiv Gopal Kapoor, Rixin Zhu, 1998 .

An Algorithmic Strategy for Automated Generation of Multicomponent Software Tools for Virtual Manufacturing

Diego Klabjan, Richard E. DeVor, Shiv Gopal Kapoor, 2005 .

Process model-based approach for machine tool and cutting process diagnostics

Richard E. DeVor, Shiv Gopal Kapoor, William A. Kline, 1996 .

Dynamic model of the cutting force system in the turning process

John W. Sutherland, William J. Endres, Richard E. DeVor, 1990 .

Tool Life Variation and Its Influence on the Development of Tool Life Models

Richard E. DeVor, D. L. Anderson, W. J. Zdeblick, 1977 .

Internet-based model for technology integration and access, Part 2

Richard E. DeVor, Shiv Gopal Kapoor, Edward C. DeMeter, 1995 .

An international assessment of micro-manufacturing research technology

Thomas R. Kurfess, Kornel Ehmann, Kamlakar P Rajurkar, 2005 .

A Forward-Backward Procedure for the Single Machine Problem to Minimize Maximum Lateness

R. E. Larson, Richard E. DeVor, M. I. Dessouky, 1980 .

Development of operational characteristics and diagnostic procedures for X̄ control charts

Richard E. DeVor, Shiv Gopal Kapoor, Gregory E. Rahn, 1991 .

An Experimental Strategy for Designing Tool Life Experiments

Richard E. DeVor, W. J. Zdeblick, 1978 .

Dual-mechanism approach to the prediction of machining forces: Part 2 - model implementation and interpretation

William J. Endres, Richard E. DeVor, Shiv Gopal Kapoor, 1993 .

An international assessment of micro-manufacturing technology

Kornel Ehmann, Richard E. DeVor, 2005 .

A methodology for integrated quality systems

Richard E. DeVor, Shiv Gopal Kapoor, M. I. Dessouky, 1987 .

TIME-VARYING PARAMETER MODEL FOR THE STABILITY ANALYSIS OF INTERMITTENT TURNING PROCESSES.

Richard E. DeVor, Shiv Gopal Kapoor, G. M. Zhang, 1985 .

Process monitoring for machine tools - Technical and business issues

Richard E. DeVor, Shiv Gopal Kapoor, William A. Kline, 2004 .

Temporal Sampling Requirements for Estimating the Mean Noise Level in the Vicinity of Military Installations

Richard E. DeVor, R. D. Neathammer, William A. Kline, 1981 .

International Assessment of Research and Development in Micromanufacturing

Thomas R. Kurfess, Kornel Ehmann, Kamlakar P Rajurkar, 2005 .

An Improved Method for Cutting Force and Surface Error Prediction in Flexible End Milling Systems

John W. Sutherland, Richard E. DeVor, J. Sutherland, 1986 .

Development of an automated microfactory: Part 1 - Microfactory architecture and sub-systems development

Richard E. DeVor, Shiv Gopal Kapoor, Andrew Honegger, 2006 .

PL-2 Micro/Meso-scale Mechanical Manufacturing : Opportunities and Challenges

Kornel Ehmann, Richard E. DeVor, Shiv Gopal Kapoor, 2002 .

An Experimental Approach to Machinability Testing

Richard E. DeVor, John C. Miller, R. DeVor, 1980 .

Quality : design, planning, and control : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Boston, Massachusetts, December 13-18, 1987

Richard E. DeVor, Shiv Gopal Kapoor, 1987 .

Modeling and analysis of internal thread forming

Richard E. DeVor, Shiv Gopal Kapoor, O. Burak Ozdoganlar, 2002 .

Development of meso-scale machine tool (mMT) systems

Kornel Ehmann, Xinyu Liu, Richard E. DeVor, 2002 .

MECHANISTIC MODEL FOR THE PREDICTION OF THE FORCE SYSTEM IN FACE MILLING OPERATIONS.

Richard E. DeVor, Shiv Gopal Kapoor, Richard E. DeVor, 1984 .

Design and analysis of micro/meso-scale machine tools

Jian Cao, Richard E. DeVor, Shiv Gopal Kapoor, 2008 .