Tohru Ishida

发表

A Framework of Compositional Machining Simulation for Versatile Machining Simulation

Yoshimi Takeuchi, Koji Teramoto, Jun'ichi Kaneko, 2007 .

Tool Posture Determination for 5-Axis Control Machining by Area Division Method

Yoshimi Takeuchi, Koji Teramoto, Tohru Ishida, 2006 .

Development of Electrode Feeding Drive Mechanism for Electrical Discharge Curved Hole Machining Using a Helical Compression Spring and Wires.

Tohru Ishida, Yoshimi Takeuchi, 1999 .

C01 Development of CAPP/CAM System for Ultra Precision Micromachining : Process Planning for High-Aspect-Ratio Structures

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2010 .

General Tool Setting Error Compensation Method for 5-axis Control Ultraprecision Machining

Koji Teramoto, Tohru Ishida, Toshiyuki Enomoto, 2007 .

A21 Development of CAD/CAM System for Cross Section's Changing Hole Electrical Discharge Machining : Creation of Postprocessor for Simultaneous 3-Axis Control Machining

Tohru Ishida, Keiichi Nakamoto, Yoshimi Takeuchi, 2010 .

Design and Implementation of Automatic Discharge Gap Controller for a Curved Hole Creating Microrobot with an Electrical Discharge Machining Function

Yoshimi Takeuchi, Tohru Ishida, 2010, Int. J. Autom. Technol..

Tool Path Generation for 5-Axis Control Machining Based on Area Division Method(Machine Elements, Design and Manufacturing)

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2010 .

Creation of U-Shaped and Skewed Holes by Means of Electrical Discharge Machining Using an Improved Electrode Curved Motion Generator

Yoshimi Takeuchi, Tohru Ishida, 2008, Int. J. Autom. Technol..

Formulation and Verification of Fundamental Mathematical Model of Automatic Discharge Gap Controller

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2010 .

Fabrication of microinducer by 5-axis control ultraprecision micromilling

Yoshimi Takeuchi, Tohru Ishida, Keiichi Nakamoto, 2011 .

Thermal State Visualization of Machining Workpiece by Means of a Sensor-Configured Heat Conduction Simulation

Yoshimi Takeuchi, Koji Teramoto, Tohru Ishida, 2006 .

Creation of Microgroove with Flat-end for Difficult-to-cut materials

Yoshimi Takeuchi, Tohru Ishida, Keiichi Nakamoto, 2009 .

6-Axis control ultraprecision microgrooving on sculptured surfaces with non-rotational cutting tool

Yoshimi Takeuchi, Tohru Ishida, Y. Yoneyama, 2006 .

Direct Measurement of Electrode Movement During Electrical Discharge Machining by Means of Automatic Discharge Gap Controller

Yoshimi Takeuchi, Tohru Ishida, Masahiko Kita, 2010, Int. J. Autom. Technol..

Tool Pass Generation Method for Shoter Overhang Tools in 3+2-Axis Control Rough Machining(Machine Elements, Design and Manufacturing)

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2009 .

Tool Posture Determination for 5-axis Control Machining by Area Division Method(Multi-axis control machining and measurement)

Yoshimi Takeuchi, Koji Teramoto, Tohru Ishida, 2005 .

Editorial: Progress of Manufacturing Technology

Keiji Yamada, Tohru Ishida, Kazuhito Ohashi, 2018, Int. J. Autom. Technol..

C2 Efficient 5-axis Control Drilling for a Large Number of Holes(Multi-axis control machining)

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2009 .

L-Shaped Curved Hole Creation by Means of Electrical Discharge Machining and an Electrode Curved Motion Generator

Yoshimi Takeuchi, Tohru Ishida, 2002 .

A11 Development of CAD/CAM System for Cross Section's Changing Hole Electrical Discharge Machining : Formulation of Post Processor(Digital design and digital manufacturing (CAD/CAM))

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2009 .

Tool Path Generation for Five-Axis Control Semi Finishing by Use of Square End Mill

Yoshimi Takeuchi, Tohru Ishida, Keiichi Nakamoto, 2012 .

2643 Size Reduction of In-Pipe Movable Mechanism for Electrical Discharge Curved Hole Machining

Yoshimi Takeuchi, Tohru Ishida, Takeshi Nakajima, 2005 .

Development of CAD/CAM System for Cross Section's Changing Hole Electrical Discharge Machining *

Tohru Ishida, Keiichi Nakamoto, Yoshimi Takeuchi, 2010 .

103 Effective Tool Pass Generation Method for Roughing in Multi-axis Control Machining

Yoshimi Takeuchi, Koji Teramoto, Tohru Ishida, 2006 .

421 Development of Electrical Discharge Curved Hole Machining Method : Shape Control by Means of Teaching Playback

Koji Teramoto, Tohru Ishida, Yoshimi Takeuchi, 2006 .

E2 Basic Performance Analysis of Cooling Pipe with a Changing Cross Section(Other manufacturing-related technologies)

Yoshimi Takeuchi, Tohru Ishida, Keiichi Nakamoto, 2009 .

Automation of Polishing Process by Industrial Robots : Polishing Path Generation in Consideration of Surface Curvature

Yoshimi Takeuchi, Tohru Ishida, Koichi Morishige, 2004 .

Development of an Electrode Motion Control Device for Curved Hole Electrical Discharge Machining

Yoshimi Takeuchi, Koji Teramoto, Tohru Ishida, 2008, Int. J. Autom. Technol..

Effective Tool Pass Generation Method for Roughing in Multi-axis Control Machining

Koji Teramoto, Tohru Ishida, Takeshi Umehara, 2007 .

Development of Movable Drilling Robot inside a Pipeline

Yoshimi Takeuchi, Tohru Ishida, Masahiko Morita, 2003 .

Development of Electrode Feed Mechanism for Electrical Discharge Curved Hole Machining Using Slider Crank Chains.

Tohru Ishida, Yoshimi Takeuchi, 2002 .

Restraint of Thermal Crack on Rake Face of Cermet Tool in Intermittent Cutting

Hitoshi Ogawa, Tohru Ishida, Masahiro Masuda, 2013, Int. J. Autom. Technol..

V-Shaped Microgrooving with Two Flat-Ends by 6-axis Control Machining

Koji Teramoto, Tohru Ishida, Toshiyuki Enomoto, 2007 .

Dexterous Machining of Chain-Shapes by Means of a Multi-Tasking Machine Tool(Machine Elements, Design and Manufacturing)

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2010 .

Curved Interpolation CL Data Creation for 5-axis Control Machining Expressed by Non-Uniform B-Spline

Yoshimi Takeuchi, Koji Teramoto, Tohru Ishida, 2006 .

5-Axis Control Dexterous Ultraprecision Micromilling of Ruled Surface with Side Cutting Edge

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2011 .

Dexterous Machining for a Complicated Shape with Nested Structure

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2011 .

Study on an Interactive System for Conceptual and Basic Design of Machine Tool Structure

Tohru Ishida, Keiichi Nakamoto, Yoshimi Takeuchi, 2010 .

Development of CAM System Considering 5-Axis Machining for Multi-Tasking Machine Tools(Machine Elements, Design and Manufacturing)

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2010 .

206 The Deburring Automation of Castings with Industrial Robot : Path Generation Based on Tool Utilization Information

Yoshimi Takeuchi, Tohru Ishida, Koichi Morishige, 2001 .

3504 Improvement of Size Reduced In-pipe Movable Mechanism for Curved Hole Electrical Discharge Machining and Extension of Curved Hole Length by Means of the Mechanism

Koji Teramoto, Tohru Ishida, Yoshimi Takeuchi, 2007 .

3603 Compensated NC Data Generation for Machining with Non-Rotational Cutting Tool by Detecting Tool Tip Position

Yoshimi Takeuchi, Tohru Ishida, Toshiyuki Enomoto, 2007 .

Development of Curved Hole Electrical Discharge Machining System by Means of an Insect Type Microrobot: (Realization of Hole Fabrication by Use of Microrobot with Electrical Discharge Machining Function)@@@（放電加工機能を有したマイクロロボットによる穴創成の実現）

Tohru Ishida, Yoshimi Takeuchi, Masahiko Kita, 2017 .

Interactive Design-Assistance System of Machine Tool Structure in Conceptual and Fundamental Design Stage

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2010, Int. J. Autom. Technol..

6-axis Control Ultraprecision Microgrooving on Sculptured Surfaces with Non-rotational Cutting Tool

Yoshimi Takeuchi, Tohru Ishida, Tomohiko Kawai, 2006 .

Dexterous Machining of Complicated Shape Consisting of Several Bended Columns

Yoshimi Takeuchi, Tohru Ishida, Keiichi Nakamoto, 2012 .

Thermal State Visualization of Machining Workpiece by Means of a Sensor-Configured Heat Conduction Simulation

Yoshimi Takeuchi, Koji Teramoto, Tohru Ishida, 2005 .

Development of CAPP System for Ultraprecision Micromachining

Yoshimi Takeuchi, Tohru Ishida, Takanobu Ohba, 2007 .

Development of CAM System for Multi-Tasking Machine Tools*

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2010 .

E16 Development of CAD/CAM System for Cross-Section Changing Hole Electric Discharge Machining : Creation of Postprocessor for 2-Dimensional Shape

Tohru Ishida, Yoshimi Takeuchi, Eiki Ishiguro, 2008 .

Creation of long curved hole by means of electrical discharge machining using an in-pipe movable mechanism

Tohru Ishida, Yoshimi Takeuchi, Yasuhito Miyake, 2004 .

Development of CAPP System for Multi-Tasking Machine Tool

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2012 .

Tool Path Generation for 5-axis Control Machining Based on Area Division Method

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2009 .

A Framework of Compositional Machining Simulation for Versatile Machining Simulation

Yoshimi Takeuchi, Koji Teramoto, Tohru Ishida, 2008 .

Creation of V-shaped microgrooves with flat-ends by 6-axis control ultraprecision machining

Yoshimi Takeuchi, Tohru Ishida, Keiichi Nakamoto, 2010 .

G1300-1-6 Tool Path Generation for 5-Axis Control Machining by Considering Tool Attitude and Attitude Variation

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2010 .

An experimental study on the compressing process for joining Al6061 sheets

Minchao Cui, Tohru Ishida, Chao Chen, 2016 .

Size Reduction and Performance Improvement of Automatic Discharge Gap Controller for Curved Hole Electrical Discharge Machining

Yoshimi Takeuchi, Koji Teramoto, Tohru Ishida, 2010 .

A7 Study on an Interactive System for Conceptual and Basic Design of Machine Tool Structure(Digital design and digital manufacturing(CAD/CAM))

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2009 .

Development of CAD/CAM System for Cross Section's Changing Hole Electrical Discharge Machining : Formulation of Post Processor for 2-Dimensional Shape( Norms the of Manufacturing and Machine Tools)

Yoshimi Takeuchi, Tohru Ishida, Yoshimi Takeuchi, 2009 .

Miniature Drilling of Chemically Strengthened Glass Plate Using Electroplated Diamond Tool

Tohru Ishida, Yuki Kagawa, Akira Mizobuchi, 2016, Int. J. Autom. Technol..

A3 Tool Path Generation for 5-Axis Control Milling Based on Area Division Method(Digital design and digital manufacturing(CAD/CAM))

Yoshimi Takeuchi, Tohru Ishida, Keiichi Nakamoto, 2009 .

221 Development of Tool Setting Error Compensation Method for 5-Axis Control Ultraprecision Machining

Koji Teramoto, Tohru Ishida, Yoshimi Takeuchi, 2006 .

DEVELOPMENT OF CURVED HOLE MACHINING METHOD – SIZE REDUCTION OF HOLE DIAMETER –

Yoshimi Takeuchi, Koji Teramoto, Tohru Ishida, 2007 .

Automation of Polishing by an Industrial Robot -Case of complicated-shaped part

Yoshimi Takeuchi, Tohru Ishida, Koichi Morishige, 2003 .

A10 Development of CAM System for Multi-tasking Machine Tools(Digital design and digital manufacturing(CAD/CAM))

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2009 .

Development of Hole-Inside Shape Fabricating Method : Machined Shape Control by Means of Software

Yoshimi Takeuchi, Tohru Ishida, 2004 .

Elementary Study on the Creation of Cross Section's Changing Holes by Means of Electrical Discharge Machining

Yoshimi Takeuchi, Tohru Ishida, Yuichi Mochizuki, 2009, Int. J. Autom. Technol..

Creation of Ultraprecision V-shaped Microgrooves Using Non-Rotational Cutting Tools

Yoshimi Takeuchi, Tohru Ishida, Kiyoshi Sawada, 2004 .

Fundamental Study on Hole Fabrication Inside a Hole by Means of Electrical Discharge Machining

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2014, Int. J. Autom. Technol..

C23 Tool Path Generation for Complex Surface in case of 5-Axis Machine Tool

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2008 .

Automation of Polishing Process by Industrial Robots

Yoshimi Takeuchi, Tohru Ishida, Koichi Morishige, 2004 .

Automation of Polishing Process with Industrial Robots : Polishing Path Generation in Consideration of Surface Curvature(Multi-axis control machining and measurement)

Yoshimi Takeuchi, Tohru Ishida, Koichi Morishige, 2005 .

Development of CAM System for Multi-Tasking Machine Tools(Machine Elements, Design and Manufacturing)

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2009 .

Development of CAM System for 5-Axis NURBS Interpolated Machining (Tool Path Generation Utilizing Interference-Free Space)

Yoshimi Takeuchi, Tohru Ishida, Takehiro Inoue, 2008 .

108 NURBS補間に対応した5軸制御加工用ポストプロセッサに関する基礎研究(OS-3 最新工作機械・多軸複合加工)

Yoshimi Takeuchi, Koji Teramoto, Tohru Ishida, 2006 .

Polishing Performance of a Recycled Grinding Wheel Using Grinding Wheel Scraps for the Wet Polishing of Stainless-Steel Sheets

Tohru Ishida, Akira Mizobuchi, Takeshi Hamada, 2022, Int. J. Autom. Technol..

Development of Electrode Motion Control Device for Electrical Discharge Curved Hole Machining

Yoshimi Takeuchi, Tohru Ishida, Yohsuke Nakajima, 2005 .

Development of electroplated diamond tool for fracture size minimization in miniature drilling of glass plate

Tohru Ishida, Akira Mizobuchi, Izumi Tada, 2014 .

Fin Fabrication inside a Hole by Means of Electrical Discharge Machining and Reciprocating Block Slider Crank Mechanism.

Yoshimi Takeuchi, Tohru Ishida, Yuichi Mochizuki, 2002 .

Electrical Discharge Machining of Constant Curvature Curved Hole by Means of Electrode Motion Control Device

Yoshimi Takeuchi, Tohru Ishida, Yasuhito Miyake, 2005 .

Study on Precision Machining of Glass Lens Mold with Minute Structures (2nd Report)

Keiichi Nakamoto, Yoshimi Takeuchi, Tohru Ishida, 2010 .

Creation of Cross-Section Changing Hole with a Hemisphere by Means of Electrical Discharge Machining

Tohru Ishida, Masahiko Kita, Y. Takeuchi, 2008 .

5-Axis Control Tool Path Generation Using Curved Surface Interpolation

Yoshimi Takeuchi, Koji Teramoto, Tohru Ishida, 2006 .

5-Axis Control Tool Path Generation Using Curved Surface Interpolation

Yoshimi Takeuchi, Koji Teramoto, Tohru Ishida, 2006 .