Elide Nastri

发表

Theory of plastic mechanism control: State-of-the-art

Vincenzo Piluso, Alessandra Longo, Elide Nastri, 2015 .

The effect of floor joists on the elastic and inelastic behavior of R.C frames

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2019, Engineering Structures.

Comparison Between Different Design Strategies for FREEDAM Frames

Vincenzo Piluso, Raffaele Landolfo, Elide Nastri, 2017 .

The Use of TPMC for Designing MRFs Equipped with FREEDAM Connections: Performance Evaluation

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2018 .

Modelling of floor joists contribution to the lateral stiffness of RC buildings designed for gravity loads

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2016 .

Theory of Plastic Mechanism Control for MRF–EBF dual systems: Closed form solution

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2016 .

Consideration of second-order effects on plastic design of steel moment resisting frames

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2019, Bulletin of Earthquake Engineering.

A critical review of plastic design approaches for failure mode control of steel moment resisting frames

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2017 .

Influence of connection typology on seismic response of MR‐Frames with and without ‘set‐backs’

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2017 .

Seismic Design of MRF-EBF Dual Systems with Vertical Links: EC8 vs Plastic Design

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2015 .

Thematic Issue on Advances in Modeling, Analysis and Design of Steel Connections

Vincenzo Piluso, Elide Nastri, 2018 .

Analisi preliminare dell'influenza della configurazione nelle performance sismiche dei sistemiaccoppiati con controventi eccentrici progettati mediante la TPMCPreliminary Analysis on the Influence of the Link Configuration on Seismic Performances ofMRF-EBF Dual Systems Designed by TPMC

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2015 .

The Use of TPMC for Designing MRFs Equipped with FREEDAM Connections: A Case Study

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2018 .

Theory of plastic mechanism control for eccentrically braced frames: Closed form solution

Elide Nastri, E. Nastri, 2015 .

DESIGN AND ANALYSIS OF DUAL EBFS EQUIPPED WITH PREQUALIFIED CONNECTIONS

Elide Nastri, Simona Streppone, Alessia Catapano, 2019 .

A simplified performance based approach for the evaluation of seismic performances of steel frames

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2020 .

Theory of plastic mechanism control for eccentrically braced frames with inverted y-scheme

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2014 .

Influence of the bracing scheme on seismic performances of MRF-EBF dual systems

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2017 .

Rigid-plastic analysis and moment–shear interaction for hierarchy criteria of inverted Y EB-Frames

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2014 .

PERFORMANCE BASED DESIGN OF MR-FRAMES BY TPMC AND ENERGY APPROACH

Vincenzo Piluso, Elide Nastri, 2015 .

Performance evaluation of a seismic retrofitted R.C. precast industrial building

Elide Nastri, Massimo Latour, Mariacristina Vergato, 2017 .

PRELIMINARY COMPARISON BETWEEN DIFFERENT SOFTWARE MODELING OF CONFINED CONCRETE

Elide Nastri, Maria Ilenia Palese, E. Nastri, 2017 .

STOCHASTIC APPROACH FOR THEORY OF PLASTIC MECHANISM CONTROL

Vincenzo Piluso, Elide Nastri, Paolo Castaldo, 2017 .

Theory of plastic mechanism control for the seismic design of braced frames equipped with friction dampers

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2014 .

An Optimal Seismic Force Pattern for Uniform Drift Distribution

Elide Nastri, Rosario Montuori, Bonaventura Tagliafierro, 2019, Buildings.

Evaluation of Rotation Capacity of RHS Aluminium Alloy Beams by FEM Simulation: Temper T6

Vincenzo Piluso, Elide Nastri, Paolo Castaldo, 2016 .

On the use of HSS in seismic-resistant structures

Vincenzo Piluso, Elide Nastri, Alessandra Longo, 2014 .

PROBABILISTIC THEORY OF PLASTIC MECHANISM CONTROL: DESIGN AND SEISMIC ASSESSMENT

Elide Nastri, Alessandro Pisapia, 2019 .

Validation of a Design Procedure for Failure Mode Control of EB-Frames: Push-Over and IDA Analyses

Vincenzo Piluso, Elide Nastri, Luigi Mastrandrea, 2013 .

Seismic response of steel Moment Resisting Frames equipped with friction beam-to-column joints

Vincenzo Piluso, Raffaele Landolfo, Elide Nastri, 2019, Soil Dynamics and Earthquake Engineering.

Preface of the Symposium: Numerical Methods for Static and Dynamic Analysis of New and Existing Structures in Seismic Areas: Design and Performance Evaluation

Elide Nastri, Rosario Montuori, 2019 .

Comparison Between Different Design Strategies For Freedam Frames: Push-Overs and Ida Analyses

Vincenzo Piluso, Raffaele Landolfo, Elide Nastri, 2018 .

Partial safety factors and overstrength coefficient evaluation for the design of connections equipped with friction dampers

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2019 .

Probabilistic Theory of Plastic Mechanism Control for Steel Moment Resisting Frames

Vincenzo Piluso, Elide Nastri, Paolo Castaldo, 2019, Structural Safety.

Preliminary comparison on MRFs and dual systems equipped with extended stiffened connections

Elide Nastri, Isidoro Russo, Gerardo Della Porta, 2019 .

The influence of the axial restraint on the overstrength of short links

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2021 .

A SIMPLIFIED APPROACH FOR THE ESTIMATION OF SEISMIC VULNERABILITY OF STEEL MOMENT RESISTING FRAMES

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2021, 8th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering Methods in Structural Dynamics and Earthquake Engineering.

Resonance of steel wind turbines: Problems and solutions

Flavio Stochino, Claudio Bernuzzi, Marco Simoncelli, 2021 .

Evaluation of the Seismic Capacity of Existing Moment Resisting Frames by a Simplified Approach: Examples and Numerical Application

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2021 .

A Simplified Approach for Seismic Performances Estimation for Steel Moment Resisting Frames

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2021, ce/papers.

AN EXAMPLE OF ENERGY DISSIPATION OPTIMIZATION FOR STEEL MRFS WITH PIN-JOINTED COLUMN BASES

Elide Nastri, Annabella Paciello, 2016 .

PRELIMINARY ANALYSIS ON THE INFLUENCE OF THE LINK CONFIGURATION ON SEISMIC PERFORMANCES OF MRF-EBF DUAL SYSTEMS DESIGNED BY TPMC

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2016 .

Seismic response of EB-frames with inverted Y-scheme: TPMC versus eurocode provisions

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2015 .

Advances in theory of plastic mechanism control: closed form solution for MR‐Frames

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2015 .

Evaluation of Rotation Capacity of RHS Aluminium Alloy Beams by FEM Simulation: Temper T4

Vincenzo Piluso, Elide Nastri, Paolo Castaldo, 2016 .

Seismic response of MRF-CBF dual systems equipped with low damage friction connections

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2019, Journal of Constructional Steel Research.

Influence of the Cyclic Behaviour Of Beam-to-Column Connection on the Seismic Response of Regular Steel Frames

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2016 .

Proposal for an Empirical Evaluation of Rotation Capacity of RHS Aluminium Alloy Beams Based on FEM Simulations

Vincenzo Piluso, Elide Nastri, Paolo Castaldo, 2016 .

Critical analysis of ultimate rotation formula for R.C. columns subjected to cyclic loadings

Vincenzo Piluso, Elide Nastri, Rosario Montuori, 2018, Engineering Structures.

ECCENTRICALLY BRACED FRAMES DESIGNED FOR THE ENERGY DISSIPATION OPTIMIZATION

Elide Nastri, 2016 .

Rigid plastic analysis for the seismic performance evaluation of steel storage racks

Marco Simoncelli, Elide Nastri, Rosario Montuori, 2019 .