José A. Simões

发表

Accuracy control of complex surfaces in reverse engineering

António Completo, Carlos Relvas, António Ramos, 2011 .

Sistema de fabrico rápido de implantes ortopédicos

Carlos Relvas, José A. Simões, Joana Reis, 2009 .

A model of bone adaptation as a topology optimization process with contact

José A. Simões, António Andrade-Campos, António Ramos, 2012 .

Fabry-Perot cavity hydrostatic pressure sensors

Orlando Frazão, Paulo Roriz, José A. Simões, 2014, Other Conferences.

Combined Bone-Implant Fixation: A Pre-Clinical Hip Stem Evaluation

António Completo, Carlos Relvas, José A. Simões, 2012 .

COMPARATIVE ANALYSIS OF BONE STRAIN DISTRIBUTION IN HIP SURFACING – NUMERICAL STUDY

António Completo, Carlos Relvas, José A. Simões, 2012 .

DEVELOPMENT OF A PATIENT-SPECIFIC FINITE ELEMENT MODEL OF A PATHOLOGICAL TRAPEZIOMETACARPAL JOINT

António Completo, Carlos Relvas, José A. Simões, 2012 .

A fiber optic buckle transducer for measurement of in vitro tendon strain

Orlando Frazão, Paulo Roriz, José A. Simões, 2015, International Conference on Optical Fibre Sensors.

Fiber optic intensity-modulated sensors: a review in biomechanics

Jose Luis Santos, Paulo Roriz, José A. Simões, 2012 .

On the use of fiber bragg sensors to assess temperature and thermal induce strain profiles in cemented hip mantles

Ilda Abe, José A. Simões, João L. Pinto, 2006 .

INFLUENCE OF THE BONE YOUNG'S MODULUS ON THE MANDIBLE STRAIN DISTRIBUTION

Hugo Marques, António Completo, Carlos Relvas, 2012 .

Effect of Geometric Variables in a New Cemented Hip Femoral Stem Concept

António Completo, Carlos Relvas, José A. Simões, 2012 .

A finite element analysis of long stemmed distal tip fixation conditions in tibial knee replacement

António Completo, José A. Simões, Fernando Fonseca, 2006 .

Numerical study of the mandible geometry influences using two different TMJ implants

Alex Ballu, Carlos Relvas, José A. Simões, 2009 .

A systematic approach for an accuracy level using rapid prototyping technologies

António Completo, José A. Simões, António Ramos, 2012 .

The influence of condylar geometry and positions of bone fixation screws on a TMJ implant

António Completo, Alex Ballu, Carlos Relvas, 2010 .

Strain distributions adjacent to bonded and debonded bone-implant interfaces: a holographic study of an idealised proximal femur

José A. Simões, Mário Vaz, J. Monteiro, 2000 .

Intradiscal pressure variation under spontaneous ventilation

Orlando Frazão, Paulo Roriz, José A. Simões, 2014, Other Conferences.

Software Development for Inverse Determination of Constitutive Model Parameters

Filipe Teixeira-Dias, José A. Simões, António Andrade-Campos, 2009 .

A COMPARATIVE STUDY OF A NATURAL AND PRESS-FIT ACETABULUM HIP JOINT, NUMERICAL STUDY

António Completo, Carlos Relvas, José A. Simões, 2012 .

FEA and experimental FBG sensing system for the analysis of different dental implant concepts

Lídia Carvalho, Ilda Abe, José A. Simões, 2006 .

EXPERIMENTAL EVALUATION OF STRESS-SHIELDING EFFECT IN A NON-CONSTRAINED ELBOW ARTHROPLASTY

António Completo, Carlos Relvas, José A. Simões, 2012 .

A New Cemented Hip Prosthesis Concept

António Completo, Carlos Relvas, José A. Simões, 2011 .

A BIOREACTOR FOR THE BIOMECHANICAL CHARACTERIZATION OF ENGINEERED CARTILAGE

António Completo, Carlos Relvas, José A. Simões, 2012 .

New Trends in Dental Biomechanics with Photonics Technologies

Orlando Frazão, Paulo Roriz, José A. Simões, 2015 .

The influence of finishing milling strategies on texture, roughness and dimensional deviations on the machining of complex surfaces

Carlos Relvas, José A. Simões, António Ramos, 2003 .

Experimental modal analysis of a synthetic composite femur

José A. Simões, J. Dias Rodrigues, J. Simões, 2004 .

Numerical and experimental investigation of bone-implant interfaces

Vaz, José A. Simões, J. Monteiro, 2001 .

Numerical-experimental models to study the Temporo-Mandibular Joint (TMJ)

Alex Ballu, António Ramos, José A. Simões, 2006 .

Experimental Evaluation of Strain Shielding in Distal Femur in Revision TKA

António Completo, José A. Simões, J. Simões, 2008 .

CAD‐CAM‐RTV – lost‐wax casting technology for medical implants

José A. Simões, António Ramos, 2009 .

Mechanical characterization of bone cement using fiber Bragg grating sensors

Orlando Frazão, José A. Simões, Sérgio M. O. Tavares, 2009 .

Piezoelectric actuator: Searching inspiration in nature for osteoblast stimulation

José A. Simões, José Potes, António Marques, 2010 .

Design of a composite hip femoral prosthesis

José A. Simões, António Marques, J. Simões, 2005 .

Prediction of cement damage for the Stanmore and Charnley femoral stems

António Completo, Carlos Relvas, José A. Simões, 2013 .

Mechanical properties of high density polyethylene/carbon nanotube composites

José A. Simões, T. V. Zhiltsova, Mónica Oliveira, 2007 .

Design of a controlled-stiffness composite proximal femoral prosthesis

José A. Simões, António Marques, G. Jeronimidis, 2000 .

Mandibular strains induced by conventional and novel dental implants

Lídia Carvalho, José A. Simões, Mário Vaz, 2004 .