Ugur Esme

发表

EXPERIMENTAL COMPARISON OF RESISTANCE SPOT WELDING AND FRICTION-STIR SPOT WELDING PROCESSES FOR THE EN AW 5005 ALUMINUM ALLOY EKSPERIMENTALNA PRIMERJAVA ODPORNOSTI PROCESOV TO^KOVNEGA VARJENJA IN TO^KOVNEGA TORNEGA VARJENJA PRI ALUMINIJEVI ZLITINI EN AW 5005

Mustafa Kemal Kulekci, Ugur Esme, Onur Er, 2011 .

APPLICATION OF A TAGUCHI-BASED NEURAL NETWORK FOR FORECASTING AND OPTIMIZATION OF THE SURFACE ROUGHNESS IN A WIRE-ELECTRICAL-DISCHARGE MACHINING PROCESS UPORABA TAGUCHIJEVE NEVRONSKE MRE@E ZA NAPOVEDOVANJE IN OPTIMIRANJE POVR(INSKE HRAPAVOSTI PRI POSTOPKU @I^NE EROZIJE

Mustafa Kemal Kulekci, Ugur Esme, Adnan Akkurt, 2012 .

MULTIPLE REGRESSION MODELING AND PREDICTION OF THE SURFACE ROUGHNESS IN THE WEDM PROCESS VE^KRATNO REGRESIJSKO MODELIRANJE IN NAPOVE- DOVANJE HRAPAVOSTI POVR(INE PRI POSTOPKU WEDM

Mustafa Kemal Kulekci, Ugur Esme, Adnan Akkurt, 2014 .

Magnesiumanwendungen zur Treibstoffersparnis und fuer die Energiegewinnung

Mustafa Kemal Kulekci, Ugur Esme, Yigit Kazancoglu, 2011 .

USE OF GREY BASED TAGUCHI METHOD IN BALL BURNISHING PROCESS FOR THE OPTIMIZATION OF SURFACE ROUGHNESS AND MICROHARDNESS OF AA 7075 ALUMINUM ALLOY UPORABA GREY-TAGUCHIJEVE METODE PRI PROCESU GLAJENJA ZA OPTIMIZACIJO POVR(INSKE HRAPAVOSTI IN MIKROTRDOTE ALUMINIJEVE ZLITINE AA 7075

Ugur Esme, 2010 .

Process Capability Analysis in Machining for Quality Improvement in Turning Operations

Mustafa Kemal Kulekci, Ugur Esme, Yigit Kazancoglu, 2012 .

COMPARATIVE MODELING OF WIRE ELECTRICAL DISCHARGE MACHINING (WEDM) PROCESS USING BACK PROPAGATION (BPN) AND GENERAL REGRESSION NEURAL NETWORKS (GRNN) PRIMERJALNO MODELIRANJE ELEKTROEROZIJSKE @I^NE OBDELAVE (WEDM) Z UPORABO POVRATNOSTI (BPN) IN SPO(NE NEVRONSKE REGRESIJSKE MRE@E (GRNN)

Ugur Esme, Yigit Kazancoglu, Onur Guven, 2010 .

PREDICTION OF SURFACE ROUGHNESS IN WIRE ELECTRICAL DISCHARGE MACHINING USING DESIGN OF EXPERIMENTS AND NEURAL NETWORKS

Ugur Esme, Funda Kahraman, A. Sagbas, 2009 .

Magnesium Applications for Fuel Economy and Energy Production

Mustafa Kemal Kulekci, Ugur Esme, Yigit Kazancoglu, 2011 .

Taguchi-Based Grey Relation Optimization of Machining Parameters and Cutting Path Strategies in CNC Pocket Milling Operations

Ugur Esme, 2014 .

OPTIMIZATION OF WIRE ELECTRICAL DISCHARGE MACHINING PROCESS USING TAGUCHI METHOD AND BACK PROPAGATION NEURAL NETWORK

Ugur Esme, Funda Kahraman, A. Sagbas, 2012 .

MULTI-OBJECTIVE OPTIMIZATION OF THE CUTTING FORCES IN TURNING OPERATIONS USING THE GREY-BASED TAGUCHI METHOD MULTI NAMENSKA OPTIMIZACIJA STRU@ENJA Z UPORABO TAGUCHI METODE NA GREY PODLAGI

Ugur Esme, Yigit Kazancoglu, Onur Guven, 2011 .

UPORABA UMETNIH NEVRONSKIH MRE@ ZA NAPOVED HRAPAVOSTI POVR(INE PRI KROGELNEM GLAJENJU ALUMINIJEVE ZLITINE AA 7075

Ugur Esme, Funda Kahraman, A. Sagbas, 2008 .

Greenhouse Gas (GHG) Reduction Technologies and Applications in Automotive Industry

Mustafa Kemal Kulekci, Ugur Esme, Tuğba Yanpar Yelken, 2012 .

Improvement of a low-cost water jet machining intensifier using reverse engineering and redesign methodology

Ugur Esme, Necdet Geren, Melih Bayramoğlu, 2007 .

OPTIMIZATION OF WELD BEAD GEOMETRY IN TIG WELDING PROCESS USING GREY RELATION ANALYSIS AND TAGUCHI METHOD OPTIMIZACIJA GEOMETRIJE TIG-VARKOV Z GREYJEVO ANALIZO IN TAGUCHIJEVO METODO

Ugur Esme, Melih Bayramoglu, Sueda Ozgun, 2009 .

Technologien zur Treibhausgas-Reduktion und ihre Anwendungen in der Automobilindustrie

Mustafa Kemal Kulekci, Ugur Esme, Tuğba Yanpar Yelken, 2012 .

Regression Based Neural Network Modeling for Forecasting of the Metal Volume Removal Rate in Turning Operations

Mustafa Kemal Kulekci, Ugur Esme, Yigit Kazancoglu, 2012 .

Effects of welding parameters on the quality of resistance spot welded SAE 1010 steel sheet

Ugur Esme, M. Bayramoglu, Necdet Geren, 2003 .

USE OF ARTIFICIAL NEURAL NETWORKS IN BALL BURNISHING PROCESS FOR THE PREDICTION OF SURFACE ROUGHNESS OF AA 7075 ALUMINUM ALLOY

Ugur Esme, Funda Kahraman, Aysun Sagbas, 2008 .

MATHEMATICAL MODELING FOR PREDICTION AND OPTIMIZATION OF TIG WELDING POOL GEOMETRY

Ugur Esme, Necdet Geren, Melih Bayramoğlu, 2009 .

MULTI-OBJECTIVE OPTIMIZATION OF THE CUTTING FORCES IN TURNING OPERATIONS USING THE GREY-BASED TAGUCHI METHOD

Ugur Esme, Yigit Kazancoglu, Onur Guven, 2011 .

Surface roughness analysis and optimization for the CNC milling process by the desirability function combined with the response surface methodology

Ugur Esme, 2015 .