Hamid Ahmadian

发表

Characterization of dominant mechanisms in contact interface restoring forces

Hassan Jalali, Hamid Ahmadian, 2012 .

Improvement in Modal Testing Measurements by Modeling and Identification of Shaker–Stinger–Structure Interactions

Hamid Ahmadian, Mohsen Mohammadali, H. Ahmadian, 2016, Experimental Techniques.

MODELING HYSTERETIC BEHAVIOR OF BOLTED JOINTS IN ASSEMBLED STRUCTURES

Hamid Ahmadian, Sadegh Rahrovani, 2008 .

A model updating method for hybrid composite/aluminum bolted joints using modal test data

Hamid Ahmadian, Majid Jamal-Omidi, Saeed Shokrollahi, 2017 .

Continuous model for analytical prediction of chatter in milling

Hamid Ahmadian, M. Salahshoor, H. Ahmadian, 2009 .

Extracting Real Modes from Complex Measured Modes

Hamid Ahmadian, G. M. L. Gladwell, F. Ismail, 1995 .

Model identification and dynamic analysis of ship propulsion shaft lines

Hassan Jalali, Hamid Ahmadian, 2015 .

Estimation of Applied Forces on Railway Vehicle Wheelsets from Measured Vehicle Responses

Hamid Ahmadian, M. Mehrpouya, H. Ahmadian, 2009 .

Nonlinear model identification of oil-lubricated tilting pad bearings

Hamid Ahmadian, Pouya Asgharifard-Sharabiani, 2015 .

A distributed mechanical joint contact model with slip/slap coupling effects

Hamid Ahmadian, Mohsen Mohammadali, H. Ahmadian, 2016 .

Parameterisation and identification of a rubber seal

John E. Mottershead, Hamid Ahmadian, Michael I. Friswell, 1997 .

Tool point dynamics prediction by a three-component model utilizing distributed joint interfaces

Hamid Ahmadian, Mostafa Nourmohammadi, H. Ahmadian, 2010 .

Identification of bolted lap joints parameters in assembled structures

Hamid Ahmadian, Hassan Jalali, H. Ahmadian, 2007 .

Generic element formulation for modelling bolted lap joints

Hamid Ahmadian, Hassan Jalali, H. Ahmadian, 2007 .

Modelling and updating of large surface-to-surface joints in the AWE-MACE structure

John E. Mottershead, Michael I. Friswell, Hamid Ahmadian, 2006 .

Identification of nonlinear bolted lap-joint parameters by force-state mapping

John E. Mottershead, Hamid Ahmadian, Hassan Jalali, 2007 .

Accepted Manuscript Not Copyedited Nonlinear Joint Model Updating in Assembled Structures

Mehrisadat Makki Alamdari, Bijan Samali, Jianchun Li, 2013 .

Modeling and identification of frictional forces at a contact interface experiencing micro-vibro-impacts

Hamid Ahmadian, Hassan Jalali, Fatemeh Pourahmadian, 2012 .

Drill string Vibration Modeling Including Coupling Effects

Hassan Jalali, Hamid Ahmadian, S Nazari, 2007 .

Coupled tribo-dynamic modelling of linear guideways for high precision machining application:

Hamid Ahmadian, Mahdi Mohammadpour, Parivash Soleimanian, 2020 .

Micro/macro-slip damping in beams with frictional contact interface

Hassan Jalali, Hamid Ahmadian, Keivan Asadi, 2012 .

Modelling machine tool dynamics using a distributed parameter tool–holder joint interface

Hamid Ahmadian, Keivan Ahmadi, H. Ahmadian, 2007 .

Nonlinear joint model updating in assembled structures

Mehrisadat Makki Alamdari, Bijan Samali, Jianchun Li, 2014 .

Stability Analysis of a Nonlinear Jointed Beam under Distributed Follower Force

Hamid Ahmadian, H. Azizi, H. Ahmadian, 2011 .

Reference and its Application in interconnection of religious ode of Sharif Morteza Al-Ghadir ode as an example

Hamid Ahmadian, effat mardani, somayeh Hassanalian, 2019 .

Modeling friction effects in lubricated roller guideways using a modified LuGre model

Hamid Ahmadian, Parivash Soleimanian, H. Ahmadian, 2021, Journal of Vibration and Control.

Stochastic model updating of rotor support parameters using Bayesian approach

Hamid Ahmadian, Zahra Taherkhani, H. Ahmadian, 2021 .

Development of generalized Iwan model to simulate frictional contacts with variable normal loads

Hamid Ahmadian, Majid Rajaei, H. Ahmadian, 2014 .

Boundary Condition Identification of a Plate on Elastic Support

Hassan Jalali, Hamid Ahmadian, Morteza Esfandiar, 2014 .

Minimization of the discretization error in mass and stiffness formulations by an inverse method

John E. Mottershead, Michael I. Friswell, Hamid Ahmadian, 1998 .

Damage location indicators from substructure mode shapes

John E. Mottershead, Michael I. Friswell, Hamid Ahmadian, 2000 .

REGULARISATION METHODS FOR FINITE ELEMENT MODEL UPDATING

John E. Mottershead, Michael I. Friswell, Hamid Ahmadian, 1998 .

Nonlinear model identification of a frictional contact support

Hassan Jalali, Hamid Ahmadian, Fatemeh Pourahmadian, 2010 .

Boundary condition identification by solving characteristic equations

John E. Mottershead, Michael I. Friswell, Hamid Ahmadian, 2001 .

Parameter Selection Strategies in Finite Element Model Updating

Hamid Ahmadian, G. M. L. Gladwell, H. Ahmadian, 1997 .

Generic element matrices suitable for finite element model updating

Hamid Ahmadian, G. M. L. Gladwell, H. Ahmadian, 1995 .

Identification of Weakly Nonlinear Systems Using Describing Function Inversion

Hassan Jalali, Hamid Ahmadian, B. T. Bonab, 2011 .

Finite Element Model Identification Using Modal Data

Hamid Ahmadian, G. M. L. Gladwell, H. Ahmadian, 1994 .

Physical Realization of Generic-Element Parameters in Model Updating

John E. Mottershead, Michael I. Friswell, Hamid Ahmadian, 2002 .

Identification of nonlinear boundary effects using nonlinear normal modes

Hamid Ahmadian, Arash Zamani, H. Ahmadian, 2009 .

EXTRACTING MODES OF A RAILWAY VEHICLE FROM MEASURED RESPONCES

Hamid Ahmadian, H. Ahmadian, 2005 .

Dynamic modeling of spot welds using thin layer interface theory

Hassan Jalali, Hamid Ahmadian, M. Friswell, 2003 .

Combining Subset Selection and Parameter Constraints in Model Updating

John E. Mottershead, Michael I. Friswell, Hamid Ahmadian, 1998 .

Identification of nonlinear bolted lap joint models

Hamid Ahmadian, Morteza Iranzad, 2012 .