Zoran Jurković

发表

APPLICATION OF TAGUCHI METHOD IN THE DESIGN OF EXPERIMENTS

Branislav Vučetić, Milenko Sekulić, Zoran Jurković, 2010 .

Modelling and Simulation of Cutting Force at Turning Process

Zoran Jurković, Andrej Hriešik, Klaudio Tominović, 2002 .

Optimization of turning using evolutionary algorithms

Zoran Jurković, Goran Cukor, 2010 .

Modelling Of Deep Drawing Force

Zoran Jurković, 1999 .

PREDICTION OF THE MAIN CUTTING FORCE IN DRILLING BY KIENZLE EQUATION

Milenko Sekulić, Zoran Jurković, Pavel Kovač, 2014 .

MAGMA software in casting process of aluminum parts

Zoran Jurković, Goran Cukor, Dalibor Jakac, 2013 .

Implementation of CAD/CAM System in Virtual Simulation of Automated Turning Center

Zoran Jurković, Mladen Perinić, Nikola Vitulić, 2011 .

APPLICATION OF TAGUCHI METHOD IN THE OPTIMIZATION OF FACE MILLING PARAMETERS

Milenko Sekulić, Zoran Jurković, Pavel Kovač, 2011 .

Determination of optimal cutting parameters to improve surface roughness based on different optimization approaches

Zoran Jurković, Goran Cukor, Tomislav Meštrović, 2008 .

THE ANALYSIS INFLUENCE OF CUTTING CONDITIONS ON ARITHMETIC SURFACE ROUGHNESS IN FACE MILLING

Zoran Jurković, Miodrag Hadžistević, Nemanja Ćirković, 2011 .

Optimising external turning tool choice using AHP and ELECTRE II methods

Jože Balič, Zoran Jurković, Zlatko Botak, 2017 .

Tools and fixtures

Branko Tadic, Zoran Jurković, Đorđe Vukelić, 2013 .

Technical and Economy Justifice of Application of Rapid Prototyping Technology

Milan Jurković, Mehmed Mahmić, Zoran Jurković, 2007 .

APPLICATION OF MODELING AND SIMULATION IN REENGINEERING OF MANUFACTURING PROCESSES

Miran Brezocnik, Milan Jurković, Milenko Sekulić, 2014 .

Operation Reliability and Diagnostics of Complex Mechanical Systems

Zoran Jurković, Jiri Stodola, Oto Barborak, 2013 .

An experimental and modelling approach for improving utilization rate of the cold roll forming production line

Milan Jurković, Zoran Jurković, Milenko Obad, 2018 .

Performance Layer of Virtual Autonomous Work Systems

Zoran Jurković, Elvis Hozdić, 2016 .

Particle swarm optimization approach for modelling a turning process

Joze Balic, Zoran Jurković, Tomaz Irgolic, 2014 .

IMPLEMENTATION OF MODELLING AND OPTIMIZATION METHODS IN MANUFACTURING PROCESSES

Branko Tadic, Damir Purković, Zoran Jurković, 2011 .

Modelling and Simulation Application by the Optimization of Deep Drawing Process

Milan Jurković, Zoran Jurković, 2003 .

Genetic Algorithm Application in Optimization of Extrusion Forming Process

Milan Jurković, Zoran Jurković, Goran Cukor, 2005 .

Evolution and Application of Rapid Prototyping Technologies

Milan Jurković, Mehmed Mahmić, Zoran Jurković, 2005 .

Theoretical Analysis of Hydroforming of Tubes

Milan Jurković, Edina Karabegović, Zoran Jurković, 2007 .

Rotatable central composite design of experiments versus Taguchi method in the optimization of turning

Milenko Sekulić, Zoran Jurković, Goran Cukor, 2011 .

MULTI-RESPONSE OPTIMIZATION OF BALL-END MILLING PARAMETERS USING THE TAGUCHI-BASED GREY RELATIONAL ANALYSIS

Milenko Sekulić, Zoran Jurković, Marin Gostimirović, 2016 .

CAE simulation models in the production process

Duško Pavletić, Zoran Jurković, Sven Maričić, 2013 .

Optimization of hard turning process parameters with PCBN tool based on the Taguchi method

Zoran Jurković, Franko Puh, Toni Šegota, 2012 .

Usage of neural network for the prediction of surface roughness after the roller burnishing

Zoran Jurković, Sven Maričić, Igor Stanković, 2012 .

Mathematical Modeling and Numerical Simulation of the Tool Loading at Deep Drawing Process

Zoran Jurković, Karl Kuzman, Dan-Sorin Cosma, 2003 .

AN INVESTIGATION OF THE FORCE AND TORQUE AT PROFILE SHEET METAL ROLLING - INPUT DATA FOR THE PRODUCTION SYSTEM REENGINEERING

Milan Jurković, Zoran Jurković, Milenko Obad, 2015 .

Optimization of machining parameters for turning operation with multiple quality characteristics using Grey relational analysis

Miran Brezocnik, Zoran Jurković, Mladen Perinić, 2016 .

Multi-Response Optimization of X20Cr13 Steel Turning Under Vortex Tube Cooling Using Grey Relational Analysis

Zoran Jurković, Goran Cukor, Tihana Kostadin, 2017 .

Mathematical Modelling And Optimisation Of Machining Processes

Branimir Barišić, Milan Jurković, Zoran Jurković, 2000 .

Experimental and Numerical Simulation of Tool Loading Force at Backward Extrusion Process

Karl Kuzman, Zoran Jurković, Andrej Hriešik, 2002 .

OPTIMIZATION OF EXTRUSION PROCESS BY GENETIC ALGORITHMS AND CONVENTIONAL TECHNIQUES

Miran Brezocnik, Zoran Jurković, Branko Grizelj, 2009 .

Stochastic Modelling And Optimization Of Tool Cutting Geometry For Turning

Milan Jurković, Zoran Jurković, Goran Cukor, 1998 .

OPTIMIZATION OF CUTTING CONDITIONS FOR SURFACE ROUGHNESS BASED ON ORTHOGONAL ARRAYS

Miran Brezocnik, Milenko Sekulić, Zoran Jurković, 2009 .

OPTIMIZATION OF TURNING PROCESS

Zoran Jurković, Tomislav Bazina, 2017 .

MACHINING AND MANUFACTURING SYSTEMS EVOLUTION

Mehmed Mahmić, Zoran Jurković, 2008 .

Mathematical Modelling and Minimization of the Tool Loading Force of Machining Process

Branimir Barišić, Zoran Jurković, Gašper Gantar, 2001 .

Simultano inženjerstvo utemeljeno na virtualnoj proizvodnji

Predrag Ćosić, Zoran Jurković, Mileta Janjić, 2012 .

Minimizing the makespan in the flowshop with sequence-dependent setup times: simulation approach

Zoran Jurković, Mladen Perinić, David Ištoković, 2019 .

Optimization of extrusion force prediction model using different techniques

Milan Jurković, Zoran Jurković, Stipo Buljan, 2006 .

MULTI-RESPONSE OPTIMIZATION OF TURNING PARAMETERS USING THE GREY-BASED TAGUCHI METHOD

Milenko Sekulić, Zoran Jurković, Goran Cukor, 2015 .

Advantages of additive manufacturing in production of gears for planetary reducers

Zoran Jurković, Maja Marković, Mladen Perinić, 2018 .

Modeling and Simulation of the Cutting Force Using Experimental Data

Milan Jurković, Zoran Jurković, 2003 .

Machine Tools and Machining Systems Evolution

Milan Jurković, Zoran Jurković, M. Jurković, 2008 .

Some Trends in the Development of Machine Tools

Zoran Jurković, Stipo Buljan, 2005 .

IMPROVING THE SURFACE ROUGHNESS AT LONGITUDINAL TURNING USING THE DIFFERENT OPTIMIZATION METHODS

Zoran Jurković, Goran Cukor, Imrich Andrejcak, 2010 .

OPTIMIZATION OF MACHINING PARAMETERS IN BALL-END MILLING USING TAGUCHI METHOD

Milenko Sekulić, Zoran Jurković, Marin Gostimirović, 2015 .

A Contribution to the Development of the Software for Modeling and Simulation of the Machining Process Using Experimental Data

Zoran Jurković, Dragan Jurković, Željko Križek, 2002 .

Mathematical modelling in machining processes application

Milan Jurković, Zoran Jurković, Stipo Buljan, 2002 .

REENGINEERING OF THE MANUFACTURING ENTERPRISES-development and modernization of production

Milan Jurković, Mehmed Mahmić, Zoran Jurković, 2011 .

Cyber Structures for Network Production Systems

Zoran Jurković, Elvis Hozdić, 2016 .

The Electro-Pneumatic System as a Cyber - Physical System: The Concept

Zoran Jurković, Elvis Hozdić, Z. Jurković, 2021 .

Modelling And Optimization Of The Tool Geometry For Deep Drawing Of Sheet Metal

Milan Jurković, Zoran Jurković, 2000 .

THE INFLUENCE OF MECHANICAL PROPERTIES OF WORKPIECE MATERIAL ON THE MAIN CUTTING FORCE IN FACE MILLING

Milenko Sekulić, Zoran Jurković, Marin Gostimirovic, 2010 .

The machinability of nickel-based alloys in high-pressure jet assisted (HPJA) turning

Janez Kopac, Milenko Sekulić, Zoran Jurković, 2013 .

The tribological state test in metal forming processes using experiment and modelling

Milan Jurković, Zoran Jurković, Stipo Buljan, 2006 .

EXPERIMENTAL INVESTIGATION OF SURFACE ROUGHNESS OBTAINED BY ABRASIVE WATER JET MACHINING

Milenko Sekulić, Zoran Jurković, Marina Franulović, 2011 .

An Experimental Modelling and Numerical FE Analysis of Steel-Strip Ironing Process

Zoran Jurković, Branko Grizelj, Srbislav Aleksandrović, 2010 .