Stéphane Segonds

发表

Correlation between machining direction, cutter geometry and step-over distance in 3-axis milling: Application to milling by zones

Johanna Senatore, Walter Rubio, Stéphane Segonds, 2012, Comput. Aided Des..

Variability influence of machining context on tool tips wear estimation - application to dry turning of 42CrMo4 steel

Frédéric Monies, Jean-Max Redonnet, Stéphane Segonds, 2013, Int. J. Manuf. Res..

Using the global optimisation methods to minimise the machining path length of the free-form surfaces in three-axis milling

Walter Rubio, Jean-Max Redonnet, Stéphane Segonds, 2015 .

Correction of milling tool paths by tool positioning defect compensation

Stéphane Segonds, Yann Landon, Pierre Lagarrigue, 2003 .

Characterising the behaviour of workpieces under the effect of tangential cutting force during NC turning: Application to machining of slender workpieces

Frederic Monies, Stéphane Segonds, Pierre Lagarrigue, 2006 .

Modelling and optimising the passage of tangency discontinuities in NC linear paths

Jean-Max Redonnet, Stéphane Segonds, Michel Mousseigne, 2012 .

Study of the effective cutter radius for end milling of free-form surfaces using a torus milling cutter

Johanna Senatore, Walter Rubio, Jean-Max Redonnet, 2013, Comput. Aided Des..

Tool positioning error (TPE) characterisation in milling

Stéphane Segonds, Yann Landon, Pierre Lagarrigue, 2004 .

One Engine Out Take-off Trajectory Optimization

Stéphane Segonds, Bastien Talgorn, Christian Bes, 2010 .

Optimisation of workpiece setup for continuous five-axis milling: application to a five-axis BC type machining centre

Walter Rubio, Stéphane Segonds, Yann Landon, 2013 .

Method for rapid characterisation of cutting forces in end milling considering runout

Frederic Monies, Stéphane Segonds, Pierre Lagarrigue, 2006 .

Determination of angular fields outside low and high collisions to mill free-form surfaces on 5-axis CNC machines

Johanna Senatore, Walter Rubio, Frederic Monies, 2012 .

Analysis of drift in iso-scallop planning—machining by regions

Johanna Senatore, Walter Rubio, Stéphane Segonds, 2013 .

Optimization of payload multi-step strategy in the case of meteorological uncertainties

Paul Sabatier, Stéphane Segonds, Bastien Talgorn, 2009 .

Milling plan optimization with an emergent problem solving approach

Walter Rubio, Jean-Max Redonnet, Alexandre Perles, 2015, Comput. Ind. Eng..

Thermal and mechanical modeling during dry turning operations

Stéphane Segonds, Pierre Lagarrigue, Patrick Gilles, 2012 .

Multidisciplinary Optimization under Uncertainty for Preliminary Aircraft Sizing

Stéphane Segonds, Christian Gogu, Christian Bes, 2011 .

Methodology Based on Multiagent for Solving Multidisciplinary Optimization Problem Under Uncertainty

Stéphane Segonds, Christian Bès, L. Jaeger, 2015, J. Aerosp. Inf. Syst..

Uncertainty propagation in multi-agent systems for multidisciplinary optimization problems

Tom Jorquera, Stéphane Segonds, Christian Gogu, 2013 .

An analytical model taking feed rate effect into consideration for scallop height calculation in milling with torus-end cutter

Walter Rubio, Florian Bugarin, Jean-Max Redonnet, 2019, J. Intell. Manuf..

Belief and plausibility approximation methods for multidimensional functions

Stéphane Segonds, Christian Gogu, Christian Bes, 2011 .

The characterisation of the dimensional change of the Z-axis in NC turning

Stéphane Segonds, Yann Landon, Pierre Lagarrigue, 2004 .

Optimization of Payload Multi-Step Strategy

Stéphane Segonds, Bastien Talgorn, Christian Bes, 2009 .

Using Clarke and Wright's Algorithm to Minimize the Machining Time of Free-Form Surfaces in 3-Axis Milling

Walter Rubio, Jean-Max Redonnet, Stéphane Segonds, 2013 .

Design optimization under evidence based uncertainty with application to an engine connecting rod

Stéphane Segonds, Christian Gogu, Christian Bes, 2010 .

Compensation for machining defects due to spindle dilatation

Walter Rubio, Jean-Max Redonnet, Stéphane Segonds, 2001 .

Tool/Material Interferences Sensibility to Process and Tool Parameters in Vibration-Assisted Drilling

Stéphane Segonds, Yann Landon, Vivien Bonnot, 2017 .

Structural airframe maintenance strategy comparison: a new approach

Stéphane Segonds, Christian Gogu, Christian Bes, 2013 .

Aircraft Multidisciplinary Design Optimization Under Both Model and Design Variables Uncertainty

Stéphane Segonds, Christian Gogu, Christian Bes, 2013 .

A decision support model in mass customization

Stéphane Segonds, Yang Xu, Yann Landon, 2017, Comput. Ind. Eng..

Topological gradient in structural optimization under stress and buckling constraints

Florian Bugarin, Stéphane Segonds, Florian Mitjana, 2021, Appl. Math. Comput..

Cable-driven parallel robot modelling considering pulley kinematics and cable elasticity

Stéphane Caro, Stéphane Segonds, Nicolas Binaud, 2021, Mechanism and Machine Theory.

Use of Sobol indexes for efficient parameter estimation in a charge transport model

Florian Bugarin, Stéphane Segonds, Iman Alhossen, 2019, IEEE Transactions on Dielectrics and Electrical Insulation.

Optimization Based Algorithms for Uncertainty Propagation Through Functions With Multidimensional Output Within Evidence Theory

Stéphane Segonds, Christian Gogu, Christian Bes, 2012 .

Tool flank wear influence on workpiece heating in dry machining

Stéphane Segonds, Pierre Lagarrigue, Guillaume Cohen, 2008 .