Daniel Kluess

发表

INSTABILITY OF TOTAL KNEE REPLACEMENTS – VALIDATION OF A NOVEL TEST SYSTEM

Rainer Bader, Christoph Woernle, Sven Herrmann, 2012 .

Biomechanical behavior of a cemented ceramic knee replacement under worst case scenarios

Daniel Kluess, Rainer Bader, Wolfram Mittelmeier, 2009, International Conference on Experimental Mechanics.

A New Method for Detection of Total Hip Replacement Loosening - Development and First Results of a Novel Mechano-acoustical Sensor

Rainer Bader, Hartmut Ewald, Daniel Kluess, 2011, BIODEVICES.

Automation of model generation for numerical simulations based on computed tomography data

Rainer Bader, Robert Souffrant, Daniel Kluess, 2012 .

Physiological-Like Testing of the Dislocation Stability of Artificial Hip Joints

Rainer Bader, Christoph Woernle, Sven Herrmann, 2015 .

Multiobjective Optimization of an Electrostimulative Acetabular Revision System

Carsten Potratz, Hartmut Ewald, Daniel Kluess, 2010, IEEE Transactions on Biomedical Engineering.

A round-robin finite element analysis of human femur mechanics between seven participating laboratories with experimental validation

Daniel Kluess, Sven Herrmann, Stefan Lehner, 2019, Computer methods in biomechanics and biomedical engineering.

Analytisches Berechnungsmodell zur Bestimmung des Einflusses konstruktiver und operativer Faktoren auf den Bewegungsumfang von Hüftendoprothesen / Analytical computational model for the determination of the influence of design and surgical factors on the range of motion of total hip replacements

Robert Souffrant, Daniel Kluess, Christoph Woernle, 2010, Biomedizinische Technik. Biomedical engineering.

A convenient approach for finite-element-analyses of orthopaedic implants in bone contact: Modeling and experimental validation

Rainer Bader, Robert Souffrant, Daniel Kluess, 2009, Comput. Methods Programs Biomed..

Finite Element Analysis in Orthopaedic Biomechanics

Daniel Kluess, D. Kluess, 2010 .

B-3 A Real-Time Musculoskeletal Model for the Hardware-in-the-Loop Joint Simulator

Sven Herrmann, Robert Souffrant, Daniel Kluess, 2010 .

HiL simulation for testing joint stability after total knee arthroplasty

Rainer Bader, Christoph Woernle, Sven Herrmann, 2012 .

A validated concept to model the bone-implant-compound for load-bearing implants in biomechanical finite-element-analyses

Daniel Kluess, Rainer Bader, Andreas Fritsche, 2009, International Conference on Experimental Mechanics.

DYNAMIC ANALYSIS OF JOINT KINEMATICS AND STABILITY AFTER TOTAL KNEE ARTHROPLASTY USING HARDWARE-IN-THE-LOOP SIMULATION

Rainer Bader, Christoph Woernle, Daniel Kluess, 2018 .

Hardware-in-the-Loop-Simulator for Testing of Total Hip Endoprostheses

Rainer Bader, Christoph Woernle, Robert Souffrant, 2009 .

Development of a Three-Dimensional Musculoskeletal Model for the Hardware-in-the-Loop Joint Simulation

Rainer Bader, Christoph Woernle, Sven Herrmann, 2010 .

P-15 From Theory to Practice: Transfer of FEA Results into Clinical Applications

Daniel Kluess, Rainer Bader, Wolfram Mittelmeier, 2010 .

Dynamical analysis of dislocation‐associated factors in total hip replacements by hardware‐in‐the‐loop simulation

Christoph Woernle, Sven Herrmann, Daniel Kluess, 2017, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

COMPARISON OF DIFFERENT EXCITATION METHODS FOR VIBROMETRY DIAGNOSIS OF THE TOTAL HIP STEM

Rainer Bader, Hartmut Ewald, Daniel Kluess, 2012 .

A novel method for tribological evaluation of bearing materials in total knee replacements

Richard Bieck, Daniel Kluess, Rainer Bader, 2012 .

HiL simulation in biomechanics: A new approach for testing total joint replacements

Rainer Bader, Michael Kaehler, Robert Souffrant, 2012, Comput. Methods Programs Biomed..

Neuro-musculoskeletal flexible multibody simulation yields a framework for efficient bone failure risk assessment

Christoph Woernle, Daniel Kluess, Rainer Bader, 2019, Scientific Reports.

A New Approach for Diagnostic Investigation of Total Hip Replacement Loosening

Rainer Bader, Hartmut Ewald, Daniel Kluess, 2011, BIOSTEC.

Modularity of a new cementless acetabular revision cup system based on research of the anatomic variability of the pelvis

Wolfram Mittelmeier, Daniel Kluess, Rainer Bader, 2010, Biomedizinische Technik. Biomedical engineering.

Hardware-in-the-Loop-Simulator for Testing of Knee Endoprostheses

Rainer Bader, Christoph Woernle, Robert Souffrant, 2009 .

Robot-Based Testing of Total Joint Replacements

Rainer Bader, Christoph Woernle, Sven Herrmann, 2013 .

Investigation of a Passive Sensor Array for Diagnosis of Loosening of Endoprosthetic Implants

Rainer Bader, Christian Schulze, Hartmut Ewald, 2012, Sensors.

Reporting checklist for verification and validation of finite element analysis in orthopedic and trauma biomechanics.

Sven Herrmann, Daniel Kluess, Matthias Woiczinski, 2021, Medical engineering & physics.

Design Study on Customised Piezoelectric Elements for Energy Harvesting in Total Hip Replacements

Daniel Kluess, Rainer Bader, Hans-E. Lange, 2021 .

Acoustic sensor system for loosening detection of hip implants

Hartmut Ewald, Daniel Kluess, Rainer Bader, 2011, 2011 Fifth International Conference on Sensing Technology.

Influence of femoral head size on impingement, dislocation and stress distribution in total hip replacement.

Daniel Kluess, Klaus-Peter Schmitz, Rainer Bader, 2007, Medical engineering & physics.

Investigation of an acoustic-mechanical method to detect implant loosening.

Hartmut Ewald, Daniel Kluess, Rainer Bader, 2013, Medical engineering & physics.

A novel in vivo sensor for loosening diagnostics in total hip replacement

Hartmut Ewald, Daniel Kluess, Rainer Bader, 2011, 2011 IEEE SENSORS Proceedings.

Interlaboratory comparison of femur surface reconstruction from CT data compared to reference optical 3D scan

Daniel Kluess, Frank Niemeyer, Michael Schwarze, 2018, BioMedical Engineering OnLine.

A novel sensor concept for optimization of loosening diagnostics in total hip replacement.

Hartmut Ewald, Daniel Kluess, Rainer Bader, 2011, Journal of biomechanical engineering.

In vivo monitoring of implant osseointegration in a rabbit model using acoustic sound analysis

Hartmut Ewald, Daniel Kluess, Rainer Bader, 2014, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Influence of the distal femoral resection angle on the principal stresses in ceramic total knee components.

Daniel Kluess, Rainer Bader, Wolfram Mittelmeier, 2012, The Knee.

Tribological Aspects of Ceramics in Total Hip and Knee Arthroplasty

Daniel Kluess, Rainer Bader, Wolfram Mittelmeier, 2011 .

Current Possibilities for Detection of Loosening of Total Hip Replacements and How Intelligent Implants Could Improve Diagnostic Accuracy

Hartmut Ewald, Daniel Kluess, Rainer Bader, 2012 .