Antonius Rohlmann

发表

Stochastic analysis of multilevel artificial disc replacement and impact on spinal balance

Thomas Zander, Antonius Rohlmann, Marcel Dreischarf, 2011 .

P030 Estimation of lumbar spine muscle forces using the finite element method and loads measured in spinal fixation devices

Antonius Rohlmann, Georg Bergmann, J. Calisse, 1998 .

HIP IMPLANT FOR TEMPERATURE MEASUREMENTS

Antonius Rohlmann, Georg Bergmann, Philipp Damm, 2012 .

Die Beanspruchung des Ellbogengelenkes nach alloplastischem Gelenkersatz - Stresses on the Elbow after Joint Replacement

Antonius Rohlmann, Georg Bergmann, A. Basli, 1986 .

Digitale Gelenkkraftmessung mit Mikroprozessor

Antonius Rohlmann, Georg Bergmann, J. Siraky, 1980 .

PROBABILISTIC FINITE ELEMENT ANALYSIS OF THE LUMBAR SPINE AFTER TOTAL DISC ARTHROPLASTY

Thomas Zander, Antonius Rohlmann, Georg Bergmann, 2008 .

Investigation of different cage designs and mechano-regulation algorithms in the lumbar interbody fusion process - a finite element analysis.

Antonius Rohlmann, Sara Checa, Hendrik Schmidt, 2014, Journal of biomechanics.

A novel system for the dynamic assessment of back shape.

William R Taylor, Antonius Rohlmann, Tobias Consmüller, 2010, Medical engineering & physics.

Influence of stem length and collar presence on stresses in hip prosthesis

Antonius Rohlmann, Georg Bergmann, R. Kölbel, 1982 .

Low power 9-channel telemetry transmitter on a single chip

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2006 .

In vitro measurements of loads and moments using an instrumented tibial tray

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2006 .

Belastungsmessungen mit einem instrumentierten Wirbel-Fixateur interne. Measuring Loads with the Aid of an Instrumented Internal Spinal Fixation Device

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 1993 .

DIE DIREKTE MESSUNG TIERISCHER UND MENSCHLICHER GELENKKRÄFTE

Antonius Rohlmann, Georg Bergmann, J. Siraky, 1979 .

Loads on an internal spinal fixation device in the postoperative temporal course

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 1998 .

Stockstütze mit integrierter Belastungsanzeige

Antonius Rohlmann, Georg Bergmann, R. Kölbel, 1978 .

Discrepancies in anthropometric parameters between different models affect intervertebral rotations when loading finite element models with muscle forces from inverse static analyses

Antonius Rohlmann, Rui Zhu, A. Rohlmann, 2014, Biomedizinische Technik. Biomedical engineering.

FINITE-ELEMENT-ANALYSIS OF AN INSTRUMENTED TIBIAL BASEPLATE

Antonius Rohlmann, Georg Bergmann, B. Heinlein, 2008 .

Einfluß der Klemmsteifigkeit auf die Lastverteilung in paarig montierten Wirbel-Fixateur interne. Influence of Clamping Rigidity on the Load Distribution between Paired Internal Spinal Fixation Devices

Antonius Rohlmann, Georg Bergmann, J. Calisse, 1994 .

Einfluß eines doppelten Zwischenwirbelkäfigs auf das mechanische Verhalten der Lendenwirbelsäule / Effect of a Dual Cage on the Mechanical Behaviour of the Lumbar Spine

Antonius Rohlmann, Th. Zander, M. Fehrmann, 2002 .

Smart implants with inductive power supply and radio-frequency data link

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2006 .

Estimation of loads on human lumbar spine: A review of in vivo and computational model studies.

Antonius Rohlmann, Marcel Dreischarf, Aboulfazl Shirazi-Adl, 2016, Journal of biomechanics.

First in vivo measurements of contact forces in the shoulder joint

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2006 .

Three dimensional finite element analysis and experimental investigation of strain in the femur with and without prosthetic replacement

Antonius Rohlmann, Georg Bergmann, R. Kölbel, 1980 .

Calibration and design improvement of load sensing orthopaedic implants

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2006 .

ZUGDAUERFESTIGKEIT DER VERBINDUNG SPONGIOSA-POLYMETHYLMETACRYLAT

Antonius Rohlmann, Georg Bergmann, R. Kölbel, 1976 .

LOADS DURING SIMULATOR AND CADAVER TESTING MEASURED WITH AN INSTRUMENTED TKA

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2007 .

Implantable 9-Channel Telemetry System for In Vivo Load Measurements With Orthopedic Implants

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2007, IEEE Transactions on Biomedical Engineering.

An instrumented implant for vertebral body replacement that measures loads in the anterior spinal column.

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2007, Medical engineering & physics.

Wirbelsäulenbelastung beim Sitzen auf einem Bürostuhl mit nach hinten kippbarer Rückenlehne / Loads Acting on the Spine when Seated on an Office Chair with a Tilting Back

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2002 .

HOLDING A WEIGHT WITH ELEVATED ARMS STRONGLY INCREASES THE LOADS ON A SPINAL IMPLANT

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2008 .

AN INSTRUMENTED SHOULDER ENDOPROSTHESIS FOR MEASURING JOINT LOADS IN VIVO

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2008 .

LOADING OF THE GLENOHUMERAL JOINT DURING EVERYDAY LIFE

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2008 .

Einfluss der Klemmsteifigkeit aud fie Lastverteilung in paarig montierten Wirbel-Fixateur interne

Antonius Rohlmann, J. Calisse, Georg Bergmann, 1994 .

Five month in vivo measurement of hip joint forces

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 1989 .

Belastungsmessungen mit einem instrumentierten Wirbel-Fixateur interne

Antonius Rohlmann, Friedmar Graichen, O. Eick, 1993 .

Instrumented orthopaedic implantsa—An overview

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2006 .

IN VIVO MEASUREMENTS OF LOADS DURING ERGOMETER CYCLING 6 MONTHS POST-OPERATIVELY

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2008 .

Load directions at hip prostheses measured in vivo

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 1989 .

Einfluss eines doppelten Zwischenwirbelkäfigs auf das mechanische Verhalten der Lendenwirbelsäule

Antonius Rohlmann, Th. Zander, M. Fehrmann, 2002 .

Über den Aussagewert der Spannungsberechnung im Femur mit der Finiten-Element-Methode (FEM)

Antonius Rohlmann, Georg Bergmann, R. Kölbel, 1978 .

CLINICALLY USED ARTIFICIAL DISCS HAVE A SIMILAR EFFECT ON LUMBAR SPINE MECHANICS

Thomas Zander, Antonius Rohlmann, Georg Bergmann, 2008 .

MECHANISCHE ANALYSE DER BEANSPRUCHUNG DES NATÜRLICHEN UND DES ENDOPROTHETISCH VERSORGTEN FEMUR

Antonius Rohlmann, Georg Bergmann, R. Kölbel, 1979 .

DEFORMATION OF THE LUMBAR SPINE DURING STANDING STRONGLY DEPENDS ON ASSUMED LOADING CONDITIONS

Thomas Zander, Antonius Rohlmann, Georg Bergmann, 2008 .

AN ORTHOSIS HAS ONLY A MINOR EFFECT ON THE LOADS ACTING ON A SPINAL IMPLANT

Thomas Zander, Antonius Rohlmann, Georg Bergmann, 2012 .

Spinal muscles can create compressive follower loads in the lumbar spine in a neutral standing posture.

Antonius Rohlmann, Kap-Soo Han, Seok-Jo Yang, 2011, Medical engineering & physics.

Automatic distinction of upper body motions in the main anatomical planes.

William R Taylor, Antonius Rohlmann, Georg N Duda, 2014, Medical engineering & physics.

Spannungsanalyse des Ellbogengelenkes vor und nach Radiuskopf-Resektion - Stress Analysis on the Elbow before and after Radial Head Resection

Antonius Rohlmann, Georg Bergmann, K. Basli, 1986 .

Total hip joint prosthesis for in vivo measurement of forces and moments.

Antonius Rohlmann, Georg Bergmann, Philipp Damm, 2010, Medical engineering & physics.

EIN INSTRUMENTIERTER WIRBEL-FIXATEUR INTERNE ZUR MESSUNG DER IMPLANTATSBELASTUNG

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 1991 .

Messung der Hüftgelenkbelastung bei zwei Patienten

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 1991 .

Determination of trunk muscle forces for flexion and extension by using a validated finite element model of the lumbar spine and measured in vivo data.

Antonius Rohlmann, Georg Bergmann, Hans-Joachim Wilke, 2006, Journal of biomechanics.

Application of a new calibration method for a three-dimensional finite element model of a human lumbar annulus fibrosus.

Lutz Claes, Antonius Rohlmann, Ulrich Simon, 2006, Clinical biomechanics.

Comparative evaluation of a novel measurement tool to assess lumbar spine posture and range of motion

Antonius Rohlmann, Daniel Weinland, Georg N. Duda, 2012, European Spine Journal.

Activities of Everyday Life with High Spinal Loads

Antonius Rohlmann, Georg Bergmann, Hendrik Schmidt, 2014, PloS one.

Material properties of femoral cancellous bone in axial loading

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 1980, Archives of orthopaedic and traumatic surgery.

Loads on a telemeterized vertebral body replacement measured in three patients within the first postoperative month.

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2008, Clinical biomechanics.

Influence of ligament stiffness on the mechanical behavior of a functional spinal unit.

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2004, Journal of biomechanics.

Effect of different surgical strategies on screw forces after correction of scoliosis with a VDS implant

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2006, European Spine Journal.

Loads on a spinal implant measured in vivo during whole-body vibration

Antonius Rohlmann, Georg Bergmann, Barbara Hinz, 2010, European Spine Journal.

Loading of the knee joint during ergometer cycling: telemetric in vivo data.

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2012, The Journal of orthopaedic and sports physical therapy.

A probabilistic finite element analysis of the stresses in the augmented vertebral body after vertebroplasty

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2010, European Spine Journal.

Comparison of the mechanical behavior of the lumbar spine following mono- and bisegmental stabilization.

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2002, Clinical biomechanics.

Analysis of the influence of disc degeneration on the mechanical behaviour of a lumbar motion segment using the finite element method.

Antonius Rohlmann, Georg Bergmann, Hendrik Schmidt, 2006, Journal of biomechanics.

Lifting up and laying down a weight causes high spinal loads.

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2013, Journal of biomechanics.

Is it possible to estimate the compressive force in the lumbar spine from intradiscal pressure measurements? A finite element evaluation.

Antonius Rohlmann, Marcel Dreischarf, Rui Zhu, 2013, Medical engineering & physics.

Material properties of femoral cancellous bone in axial loading

Antonius Rohlmann, Georg Bergmann, Hans Zilch, 1980, Archives of orthopaedic and traumatic surgery. Archiv fur orthopadische und Unfall-Chirurgie.

Different Arm Positions and the Shape of the Thoracic Spine Can Explain Contradictory Results in the Literature About Spinal Loads for Sitting and Standing

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2010, Spine.

In vivo measurements of the effect of whole body vibration on spinal loads

Antonius Rohlmann, Georg Bergmann, Philipp Damm, 2013, European Spine Journal.

In vivo implant forces acting on a vertebral body replacement during upper body flexion.

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2015, Journal of biomechanics.

Loads on an internal spinal fixation device during physical therapy.

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2002, Physical therapy.

Lumbar spinal loads vary with body height and weight.

William R Taylor, Antonius Rohlmann, A. Rohlmann, 2013, Medical engineering & physics.

A non-optimized follower load path may cause considerable intervertebral rotations.

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2010, Journal of biomechanics.

In vivo loads on a vertebral body replacement during different lifting techniques.

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2016, Journal of biomechanics.

High-Tech Hip Implant for Wireless Temperature Measurements In Vivo

Antonius Rohlmann, Georg Bergmann, Philipp Damm, 2012, PloS one.

Telemeterized Load Measurement Using Instrumented spinal Internal Fixators in a Patient With Degenerative Instability

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 1995, Spine.

Loads on a Telemeterized Vertebral Body Replacement Measured in Two Patients

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2008, Spine.

Antonius Rohlmann, Marcel Dreischarf, Hendrik Schmidt, 2014, PloS one.

Measurement of the number of lumbar spinal movements in the sagittal plane in a 24-hour period

Antonius Rohlmann, Marcel Dreischarf, Georg N. Duda, 2014, European Spine Journal.

IN VIVO SHOULDER JOINT FORCES AT ISOLATED MOTIONS

Antonius Rohlmann, Georg Bergmann, Friedmar Graichen, 2008 .

Optimal stiffness of a pedicle-screw-based motion preservation implant for the lumbar spine

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2012, European Spine Journal.

An enhanced and validated generic thoraco-lumbar spine model for prediction of muscle forces.

Antonius Rohlmann, William R. Taylor, A. Rohlmann, 2012, Medical engineering & physics.

Effect of bone graft characteristics on the mechanical behavior of the lumbar spine.

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2002, Journal of biomechanics.

Effect of multilevel lumbar disc arthroplasty on spine kinematics and facet joint loads in flexion and extension: a finite element analysis

Antonius Rohlmann, Fabio Galbusera, Hendrik Schmidt, 2012, European Spine Journal.

Effect of a posterior dynamic implant adjacent to a rigid spinal fixator.

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2006, Clinical biomechanics.

Measured loads on a vertebral body replacement during sitting.

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2011, The spine journal : official journal of the North American Spine Society.

Computational biomechanics of a lumbar motion segment in pure and combined shear loads.

Antonius Rohlmann, Marcel Dreischarf, Aboulfazl Shirazi-Adl, 2013, Journal of biomechanics.

Optimised loads for the simulation of axial rotation in the lumbar spine.

Antonius Rohlmann, Marcel Dreischarf, Georg Bergmann, 2011, Journal of biomechanics.

Comparison of the biomechanical effects of posterior and anterior spine-stabilizing implants

Antonius Rohlmann, G. Bergmann, A. Rohlmann, 2005, European Spine Journal.

The risk of disc prolapses with complex loading in different degrees of disc degeneration - a finite element analysis.

Lutz Claes, Antonius Rohlmann, Hendrik Schmidt, 2007, Clinical biomechanics.

Influence of different artificial disc kinematics on spine biomechanics.

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2009, Clinical biomechanics.

Effect of an artificial disc on lumbar spine biomechanics: a probabilistic finite element study

Antonius Rohlmann, Georg Bergmann, G. Bergmann, 2008, European Spine Journal.