Jon P. Longtin

发表

Review of Waste Energy Resource in Vehicle Engine Exhaust

Gaosheng Fu, Lei Zuo, Jon P. Longtin, 2012 .

Multi-objective optimization of a free-piston Vuilleumier heat pump using a genetic algorithm

Jon P. Longtin, Hanfei Chen, Peter Hofbauer, 2020 .

FireFly

Himanshu Shah, Vyas Sekar, Himanshu Gupta, 2014, SIGCOMM.

Modeling of Interdigital Capacitive Strain Gauges Fabricated Using Direct Write Technology

Jinggao Li, Jon P. Longtin, Andrew Gouldstone, 2006 .

Vibration Control Analysis on Energy Saving for Data Centers using Optical Wireless Communication (OWC)

Kai Zheng, Jon P. Longtin, Himanshu Gupta, 2017 .

Handling rack vibrations in FSO-based data center architectures

Kai Zheng, Himanshu Gupta, Jon P. Longtin, 2018, 2018 International Conference on Optical Network Design and Modeling (ONDM).

Laser assisted hybrid additive manufacturing of thermoelectric modules

David J. Hwang, Jon P. Longtin, Tao Zhang, 2017, LASE.

Optimization of Heat Exchanger of Vuilleumier Heat Pump using Teaching-Learning Based Algorithm

Jon P. Longtin, Yuexin Huang, Siddhartha Gadiraju, 2014 .

Thermoelectric-Driven Sustainable Sensing and Actuation Systems for Fault-Tolerant Nuclear Incidents

Jon P. Longtin, 2016 .

FireFly: reconfigurable optical wireless networking data centers

Vyas Sekar, Samir R. Das, Peng Deng, 2017, OPTO.

Occurrence of Radon, Radium, and Uranium in Groundwater

Jon P. Longtin, J. Longtin, 1988 .

Multi-objective Optimization for a Free-piston Vuilleumier Heat Pump Based on an Evolutionary Algorithm

Jon P. Longtin, Hanfei Chen, ChihChieh Lin, 2018 .

Design of a low-cost, high-resolution retrofit module for residential natural gas meters

Jon P. Longtin, M. Tewolde, J. C. Fritch, 2015 .

Sensors for Small Modular Reactors Powered by Thermoelectric Generators

Tao Zhang, David J. Hwang, Lei Zuo, 2014 .

Use of a Two-Phase Thermosyphon as a Low-Cost, High-Performance Economizer for Refrigeration Systems

Tao He, Jon P. Longtin, Chunlei Mei, 2013 .

FireFly: a reconfigurable wireless data center fabric using free-space optics

Himanshu Shah, Vyas Sekar, Samir R. Das, 2015, SIGCOMM 2015.

Determining appliance energy usage with a high-resolution metering system for residential natural gas meters

Jon P. Longtin, S. Sharma, M. Tewolde, 2013 .

Multifunctional magneto-plasmonic nanotransducers for advanced theranostics: synthesis, modeling and experiment

Jon P. Longtin, Ya Wang, Masoud Masoumi, 2015, Smart Structures.

Laser-assisted manufacturing of thermal energy devices

David J. Hwang, Tao Zhang, Jon P. Longtin, 2016, SPIE LASE.

FSONet: A Wireless Backhaul for Multi-Gigabit Picocells Using Steerable Free Space Optics

Kai Zheng, Md. Shaifur Rahman, Himanshu Gupta, 2017, MobiCom.

Laser-Based Temperature Measurement at a Liquid Surface

Jon P. Longtin, Ching-Hua Fan, 1998 .

Thermoelectrically Powered Sensing for Small Modular Reactors

Tao Zhang, David J. Hwang, Lei Zuo, 2013 .

Dynamic modeling and parameter optimization of a free-piston Vuilleumier heat pump with dwell-based motion

Jon P. Longtin, Hanfei Chen, ChihChieh Lin, 2019 .

Design of Data Center Free-Space Optical network: Optical and Mechanical Considerations

Kai Zheng, Himanshu Gupta, Jon P. Longtin, 2018 .

Real-time laser-based measurement of interface temperature during droplet impingement on a cold surface

Jon P. Longtin, Y. Li, Q. Chen, 2003 .

Sensors for harsh environments by direct write thermal spray

Jon P. Longtin, Sanjay Sampath, Richard J. Gambino, 2002, Proceedings of IEEE Sensors.

Plasma Absorption of Femtosecond Laser Pulses in Dielectrics

Jon P. Longtin, J. Sun, J. Longtin, 2002 .

Ultrafast laser machining of tapered microchannels in glass and PDMS

Jon P. Longtin, T. Cubaud, J. Longtin, 2012 .

A numerical investigation on the influence of liquid properties and interfacial heat transfer during microdroplet deposition onto a glass substrate

Jon P. Longtin, Daniel Attinger, Rajneesh Bhardwaj, 2007 .

Laser-induced surface-tension-driven flows in liquids

Jon P. Longtin, Kuniyasu Ogawa, K. Ogawa, 1999 .

INTEGRATED ADDITIVE MANUFACTURING AND LASER MICROMACHINING TO FABRICATE THERMOELECTRIC GENERATORS DIRECTLY ONTO WASTE-HEAT COMPONENTS

David J. Hwang, Jon P. Longtin, Ki-Hoon Kim, 2016 .

A One-Dimensional Model of a Micro Heat Pipe During Steady-State Operation

Jon P. Longtin, Frank M. Gerner, F. Gerner, 1994 .

Inert gas beam delivery for ultrafast laser micromachining at ambient pressure

Jon P. Longtin, J. Sun, J. Longtin, 2001 .

Ultrafast laser micromachining of silica aerogels

Jon P. Longtin, Pamela M. Norris, J. Sun, 2001 .

PRECISION LASER-BASED CONCENTRATION AND REFRACTIVE INDEX MEASUREMENT OF LIQUIDS

Jon P. Longtin, Ching-Hua Fan, J. Longtin, 1998 .

Development of a coherent gradient-sensing tomographic interferometer for three-dimensional refractive index-based measurements

Vishwanath Prasad, Jon P. Longtin, V. Prasad, 2002 .

Ultrafast laser micromachining and patterning of thermal spray multilayers for thermopile fabrication

Jon P. Longtin, Sanjay Sampath, Szymon Tankiewicz, 2004 .

Direct-Write Thermal Spraying of Multilayer Electronics and Sensor Structures

Jon P. Longtin, Richard J. Gambino, Robert Greenlaw, 2002 .