林富洪

发表

Fault Location Method single ended distributed parameter line amplitude characteristic measuring the impedance single-phase ground

林富洪, 曾惠敏, 2013 .

Using a single terminal current transmission line protection method to achieve single-phase high-impedance ground fault

林富洪, 曾惠敏, 2013 .

Implemented using the distributed parameter line from the single-phase ground fault protection method

林富洪, 曾惠敏, 2013 .

One kind of double circuit lines with the ground fault distance protection method bar

林富洪, 曾惠敏, 2013 .

Method for realizing relay protection of single-phase high-resistance earth fault of power transmission line by using single-ended current magnitude

林富洪, 曾惠敏, 2013 .

Method utilizing lumped parameters to realize line interphase fault single-terminal location

林富洪, 2013 .

Electric transmission line one-phase grounding fault full-component voltage protection method

林富洪, 曾惠敏, 2013 .

Circuit single-phase earth fault impedance distance protection method based on additional impedance actual measurement correction

林富洪, 曾惠敏, 2013 .

Method for realizing line single-phase earth fault single-terminal fault locating by using real part of voltage drop along line

罗毅, 李振华, 林富洪, 2013 .

Single-phase earth fault distance protection method based on distance measurement type electric transmission line

林富洪, 曾惠敏, 2013 .

High voltage cable-overhead line hybrid line fault phase ranging method

王增平, 叶东华, 林富洪, 2010 .

Circuit single-end ranging method based on phase aberration characteristic of positioning function

王增平, 叶东华, 林富洪, 2010 .

Lossy electric transmission line voltage traveling wave protection method

林富洪, 2013 .

Method using dynamic extraction coefficient to realize line inter-phase single-terminal fault location

林富洪, 曾惠敏, 2013 .

Voltage measurement method of inter-phase short-circuit fault point of UHV (ultra-high voltage) AC (alternating current) power transmission line

林富洪, 曾惠敏, 2013 .

Current-transformer-saturation-influence-resistant traveling-wave differential protection method for currents of lossy line

林富洪, 曾惠敏, 2013 .

Distance measurement method for line phase-to-phase fault distance protection

马静, 王彤, 王增平, 2011 .

Line single-phase earth fault single-terminal location method implemented by aid of zero-sequence voltage distribution characteristics

林富洪, 曾惠敏, 2013 .

Current protection method for power transmission line during single-phase high-resistance ground fault

林富洪, 曾惠敏, 2013 .

Line single-phase earth fault relay protection method based on along-the-line voltage drop characteristic

林富洪, 曾惠敏, 2013 .

Current Differential protection method based on positive sequence current transmission line short data windows

林富洪, 曾惠敏, 2014 .

Relay protection method for phase to phase fault of circuit

马静, 王彤, 王增平, 2011 .

Transition resistance and load current influence resisting line inter-phase fault single-terminal location method

林富洪, 曾惠敏, 2013 .

Line single-phase earth fault distance protection method implemented by aid of distributed parameters

林富洪, 曾惠敏, 2013 .

Line single-phase earthing fault single-end ranging method realized by utilizing voltage drop imaginary part characteristics

林富洪, 2013 .

Power grid line wide-area current protection method based on admittance matrix fast correction

林富洪, 2014 .

Grounding fault distance protecting method of double circuit lines on same tower

林富洪, 曾惠敏, 2013 .

Electric transmission line phase fault relay protection method

林富洪, 曾惠敏, 2013 .

Wide area measurement system based back-up protection method of multi-terminal high-voltage power transmission area

马静, 王增平, 叶东华, 2010 .

Double Circuits Jacobian matrix based on the asynchronous sampling two-terminal fault location method

林富洪, 2014 .

Same Tower type single-phase ground fault diagnosis method Double Circuits

林富洪, 曾惠敏, 2014 .

The voltage drop characteristic of the real part of the line to achieve a single-phase fault end ranging method

林富洪, 曾惠敏, 2013 .

Single-phase earth fault distance protection method of power transmission line

林富洪, 曾惠敏, 2013 .

Fault location optimal point data selecting method based on a fault recording file

林富洪, 曾惠敏, 2013 .

Electric transmission line fault detection method based on voltage traveling wave prediction

李振华, 林富洪, 曾惠敏, 2012 .

Independent of the load current line and transition resistance two-terminal fault location method

林富洪, 曾惠敏, 2013 .

Electric transmission line interphase fault full-component voltage protection method

林富洪, 曾惠敏, 2013 .

Electric transmission line phase fault distance protecting method

林富洪, 曾惠敏, 2013 .

Single-phase line earth fault relay protection method based on voltage drop phase characteristic

林富洪, 曾惠敏, 2013 .

Power transmission line overload false operation prevention phase-to-phase distance backup protection method

林富洪, 2014 .

Phase non-dot line across the ground return line anti-dual protection method from

李振华, 林富洪, 林明星, 2014 .

Double-end fault locating method for overhead line-power cable mixed connection line

林富洪, 2014 .

Circuit single-phase ground distance measurement method

王彤, 王增平, 李生坤, 2011 .

Lumped parameter is utilized to realize circuit inter-phase fault single-end ranging

林富洪, 2013 .

Single-terminal distance measurement method for line single-phase earth faults based on distributed parameter measurement impedance amplitude characteristics

林富洪, 曾惠敏, 2013 .

Electric transmission line one-phase grounding fault type diagnostic method

潘立志, 郑志煜, 佘剑锋, 2013 .

Single-phase grounding fault direction discriminating method of double-circuit lines on the same tower

李振华, 林富洪, 陈文景, 2014 .

Electric transmission line single-phase earth fault relay protection method based on fault position factor

林富洪, 2014 .