Yulong Zhao

发表

Research on a MEMS based encrypted rotary safety and arming device

Tengjiang Hu, Kuang Fang, Xiaohua Jiang, 2020 .

Mechanical behavior analysis on electrostatically actuated rectangular microplates

Yulong Zhao, Libo Zhao, Zhikang Li, 2015 .

Integration design of a MEMS based fuze

Tengjiang Hu, You Zhao, Yulong Zhao, 2017 .

Micro-pressure sensor dynamic performance analysis

Jiang Zhuangde, Yulong Zhao, Bian Tian, 2014 .

A Through-Hole Capacitive Micromachined Ultrasonic Transdcuer with High Perfromance

Shuaishuai Guo, Yulong Zhao, Yihe Zhao, 2019, 2019 IEEE 14th International Conference on Nano/Micro Engineered and Molecular Systems (NEMS).

RESEARCH OF THE HIGH TEMPERATURE PRESSURE SENSOR TECHNOLOGY

Yulong Zhao, 2002 .

Investigation of High-Efficiency Parallel-Circuit Class-EF Power Amplifiers With Arbitrary Duty Cycles

Wenhua Chen, Fadhel M. Ghannouchi, Xiang Li, 2021, IEEE Transactions on Industrial Electronics.

Research on a MEMS Detonated Device with Built-in Safety and Arming Device

Yulong Zhao, Kexin Wang, Tengjing Hu, 2021, 2021 IEEE 16th International Conference on Nano/Micro Engineered and Molecular Systems (NEMS).

Mass fabrication of 4H-SiC high temperature pressure sensors by femtosecond laser etching

You Zhao, Yulong Zhao, Bo Li, 2021, 2021 IEEE 16th International Conference on Nano/Micro Engineered and Molecular Systems (NEMS).

A Flexible Pressure Sensor Based on Magnetron Sputtered MoS2

Yulong Zhao, Yiwei Shao, Dongliang Zhang, 2021, Sensors.

Design and Fabrication of A latching Silicon-based MEMS Switch

Tengjiang Hu, Yulong Zhao, Tongtong Cao, 2021, 2021 IEEE 16th International Conference on Nano/Micro Engineered and Molecular Systems (NEMS).

Sensitivity enhancement of a microcantilever based DC current sensor by using its torsional modes

Zhuangde Jiang, Yulong Zhao, Libo Zhao, 2014 .

Note: High temperature pressure sensor for petroleum well based on silicon over insulator.

Yulong Zhao, Bian Tian, B. Tian, 2015, The Review of scientific instruments.

Incorporation of beams into bossed diaphragm for a high sensitivity and overload micro pressure sensor.

Zhuangde Jiang, Yulong Zhao, Bian Tian, 2013, The Review of scientific instruments.

A MEMS resonant accelerometer for low-frequency vibration detection

Zhuangde Jiang, Yulong Zhao, Yajing Shen, 2018, Sensors and Actuators A: Physical.

Fabrication of three-dimensional helical microchannels with arbitrary length and uniform diameter inside fused silica.

Qing Yang, Feng Chen, Xun Hou, 2012, Optics letters.

BACK PROPAGATION NEURAL NETWORK MODEL FOR TEMPERATURE AND HUMIDITY COMPENSATION OF A NON DISPERSIVE INFRARED METHANE SENSOR

Zhuangde Jiang, Yulong Zhao, Wei Zhang, 2013 .

The design and analysis of beam-membrane structure sensors for micro-pressure measurement.

Zhuangde Jiang, Yulong Zhao, Bian Tian, 2012, The Review of scientific instruments.

A piezoelectric cantilever with novel large mass for harvesting energy from low frequency vibrations

Zhuangde Jiang, Yulong Zhao, Libo Zhao, 2018, AIP Advances.

Geometry optimization for micro-pressure sensor considering dynamic interference.

Yulong Zhao, Bian Tian, Zhongliang Yu, 2014, The Review of scientific instruments.

In-Situ Measurement of Fluid Density Rapidly Using a Vibrating Piezoresistive Microcantilever Sensor Without Resonance Occurring

Zhuangde Jiang, Yulong Zhao, Libo Zhao, 2014, IEEE Sensors Journal.

A bossed diaphragm piezoresistive pressure sensor with a peninsula–island structure for the ultra-low-pressure range with high sensitivity

Xu Yu, Zhuangde Jiang, Yulong Zhao, 2016 .

A high performance micro-pressure sensor based on a double-ended quartz tuning fork and silicon diaphragm in atmospheric packaging

Bo Li, Yulong Zhao, Bian Tian, 2015 .

Surface stress-induced deflection of a microcantilever with various widths and overall microcantilever sensitivity enhancement via geometry modification

Zhuangde Jiang, Yulong Zhao, Libo Zhao, 2011 .

Modeling and analysis of a novel combined peninsula–island structure diaphragm for ultra-low pressure sensing with high sensitivity

Xu Yu, Zhuangde Jiang, Yulong Zhao, 2016 .

Modelling and characterisation of a micromachined resonant pressure sensor with piezoelectric excitation and sensing

Yulong Zhao, Rongjun Cheng, Bo Li, 2016 .

Full distributed fiber optical sensor for intrusion detection in application to buried pipelines

Zhuangde Jiang, Yulong Zhao, Li Zhu, 2005 .

An Improved Method for the Mechanical Behavior Analysis of Electrostatically Actuated Microplates Under Uniform Hydrostatic Pressure

Zhuangde Jiang, Yulong Zhao, Libo Zhao, 2015, Journal of Microelectromechanical Systems.

Capacitive micromachined ultrasonic transducer for ultra-low pressure detection

Zhuangde Jiang, Yulong Zhao, Libo Zhao, 2014, The 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS).

Research on ion implantation in MEMS device fabrication by theory, simulation and experiments

Yulong Zhao, Lei Wang, Minyu Bai, 2018, International Journal of Modern Physics B.

A double-end fixed beam structure of MEMS piezoresistive high g accelerometer

Yulong Zhao, Zhengyong Duan, Jing Liang, 2011, 2011 International Conference on Electric Information and Control Engineering.

Design optimization of high pressure and high temperature piezoresistive pressure sensor for high sensitivity.

Yulong Zhao, Bian Tian, Zhe Niu, 2014, The Review of scientific instruments.

Impact experiment analysis of MEMS ultra-high G piezoresistive shock accelerometer

Yulong Zhao, Yihe Zhao, Libo Zhao, 2018, 2018 IEEE Micro Electro Mechanical Systems (MEMS).

Regulation of lubricant supply by wettability gradient in rolling EHL contacts

Yulong Zhao, P. L. Wong, P. Wong, 2018 .

A high sensitive pressure sensor with the novel bossed diaphragm combined with peninsula-island structure

Zhuangde Jiang, Yulong Zhao, Libo Zhao, 2016 .

A temperature compensation system for silicon pressure sensor based on neural networks

Yulong Zhao, Guanwu Zhou, Fangfang Guo, 2014, The 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS).

A micro resonant acceleration sensor comprising silicon support with temperature isolator and quartz doubled ended tuning fork

Yulong Zhao, Rongjun Cheng, Cun Li, 2014, The 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS).

Fabrication of capacitive micromachined ultrasonic transducers with low-temperature direct wafer-Bonding technology

Zhuangde Jiang, Yulong Zhao, Yihe Zhao, 2017 .

Design of a high-speed electrothermal linear micromotor for microelectromechanical systems safety-and-arming devices

Tengjiang Hu, Xiuyuan Li, Yingwei Bai, 2016 .

A piezoresistive micro-accelerometer with high frequency response and low transverse effect

You Zhao, Yulong Zhao, Bian Tian, 2017 .

Design and analysis of the cross-linked dual helical micromixer for rapid mixing at low Reynolds numbers

Qing Yang, Yulong Zhao, Chao Shan, 2015 .

A novel piezoresistive accelerometer featuring in-plane vibration

Zhuangde Jiang, Yulong Zhao, Libo Zhao, 2014, 2014 IEEE International Conference on Electron Devices and Solid-State Circuits.

Incorporation of the stress concentration slots into the flexures for a high-performance microaccelerometer.

Yulong Zhao, Yan Liu, Bian Tian, 2012, The Review of scientific instruments.

A resonant sensor composed of quartz double ended tuning fork and silicon substrate for digital acceleration measurement.

Yulong Zhao, Yan Liu, Rongjun Cheng, 2014, The Review of scientific instruments.

Multichannel oscillatory-flow PCR micro-fluidic chip with controllable temperature gradient

Yulong Zhao, Niancai Peng, Jinquan Nie, 2015 .

A micro-machined differential resonance accelerometer based on silicon on quartz method

You Zhao, Yulong Zhao, Rongjun Cheng, 2017 .

A MEMS flow velocity sensor with low kinetic energy dissipation rate

Pei Chen, Yulong Zhao, Bian Tian, 2017 .

Analysis of the Packaging Stresses in Monolithic Multi-Sensor

Zhuangde Jiang, Yulong Zhao, Jingbo Xu, 2007, 2007 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

A three-axial micro-force sensor based on MEMS technology

Yulong Zhao, Qijing Lin, Weizhong Wang, 2010 .

Design and fabrication of a resonant pressure sensor by combination of DETF quartz resonator and silicon diaphragm

Yulong Zhao, Bian Tian, Rongjun Cheng, 2015 .

Facile fabrication of true three-dimensional microcoils inside fused silica by a femtosecond laser

Qing Yang, Feng Chen, Xun Hou, 2012, Journal of Micromechanics and Microengineering.

Research of a Novel 3D Printed Strain Gauge Type Force Sensor †

Yulong Zhao, Yiwei Shao, Qi Zhang, 2018, Micromachines.

3D Printed Force Sensor with Inkjet Printed Piezoresistive Based Strain Gauge

Yulong Zhao, Yiwei Shao, Qi Zhang, 2018, 2018 IEEE SENSORS.

A fluid viscosity sensor with resonant trapezoidal micro cantilever

Zhuangde Jiang, Yulong Zhao, Libo Zhao, 2013, 2013 IEEE International Symposium on Assembly and Manufacturing (ISAM).

DC current measurement utilizing a resonant magnetically actuated piezoresistive microcantilever

Zhuangde Jiang, Yulong Zhao, Libo Zhao, 2013 .

The novel measurement method of liquid level and density in airtight container.

Yulong Zhao, Bian Tian, Zhe Niu, 2012, The Review of scientific instruments.