Thomas Koch

发表

Fabricating and testing complex optical elements with high precision

Hexin Wang, Volkmar Giggel, Gerhard Derst, 2011, Optical Engineering + Applications.

Direktantriebe für Lokomotiven

Andreas Binder, Thomas Koch, O. Körner, 2002 .

Permanent magnet synchronous direct drive for high speed trains

Andreas Binder, Thomas Koch, 2001 .

Design of Micropower Microphone and Speech Detection Circuits

Thomas Koch, 2008 .

Case History of a Full Scale Axial Load Test of Sheet Piles

Miguel A. Pando, Thomas Koch, Matthew J. Whelan, 2017 .

Energy saving with high speed trains propelled by direct permanent magnet synchronous drive

Andreas Binder, Thomas Koch, T. Koch, 2001 .

A method for treating laundry in a domestic washing machine with a foam-forming liquor

Thomas Koch, Ingo Schulze, 2007 .

Broadband and wide-angle hybrid antireflection coatings prepared by combining interference multilayers with subwavelength structures

Thomas Koch, Alexandre Gatto, Ernst-Bernhard Kley, 2016 .

Untersuchung zum Gesamtfehler bei Emissionsmessungen auf der Straße

Dominik Appel, Uwe Wagner, Thomas Koch, 2019 .

Engine-in-the-Loop as a Development Tool for Emissions Optimisation in the Hybrid Context

Ulrich Spicher, Thomas Koch, Christian Donn, 2014 .

What`s going on in energy Efficiency Research? A platform to enhance the transparency of energy Research funding in Germany

Thomas Koch, Leif Oppermann, Clemens Rohde, 2017 .

Experimental investigation of the cold start behavior of different coolant circuits for a waste heat recovery system and their influence on the engine

Thomas Koch, Frank Stahl, Thomas Matousek, 2017 .

Clean biomass staged gasifier based on new tar cracking and ash slagging techniques for efficient CHP generation

Thomas Koch, Laurent Van de Steene, Ammar Bensakhria, 2002 .

Einfluss von Brennraumablagerungen auf die Wandwärmeverluste

Thomas Koch, Alex Weidenlener, Jürgen Pfeil, 2019, MTZ - Motortechnische Zeitschrift.

Optimization of the spectral performance of multilayer coatings on complex optics in plasma assisted deposition processes

Thomas Koch, Diana Tonova, Michael Sundermann, 2014, Photonics Europe.

Biomass Gasification for CHP with dry gas cleaning and regenerative heat recovery

Thomas Koch, Philippe Girard, M. W. Fock, 2002 .

Influence and potential of flexible injection rate shaping for medium and heavy duty diesel engine combustion processes

Thomas Koch, Uwe Gärtner, Gerhard König, 2006 .

A process for recovering a waste heat of an internal combustion engine

Thomas Koch, Andreas Zygan, Jan Gärtner, 2007 .

Combustion process in an engine with direct injection

Konstantinos Boulouchos, Thomas Koch, Katharina Schänzlin, 2003 .

Hochleistungskeramik für Mobilität, Elektrotechnik/Optik und Life Sciences = High-performance ceramics for mobility, electrical engineering/optics and life sciences

Thomas Koch, B. Voigtsberger, W. Rossner, 2015 .

Wirkmechanismen der dieselmotorischen NO 2 -Bildung

Thomas Koch, Michael Rößler, Matthias Olzmann, 2017 .

A method of operating a waste heat recovery device

Andreas Franke, Thomas Koch, Jan Gärtner, 2013 .

Analysis of a lab-based measure concept for the acoustics of high pressure fuel pumps

Thomas Koch, Thorsten Hergemöller, Simon Schindler, 2017 .

Modeling the emissions of a gasoline engine during high-transient operation using machine learning approaches

Uwe Wagner, Thomas Koch, Mohammad Hossein Moradi, 2021, International Journal of Engine Research.

A model-based approach for a control strategy of a charge air cooling concept in an ejector refrigeration cycle

Thomas Koch, Tobias Beran, Jan Gärtner, 2021, Automotive and Engine Technology.

Modelling of Engine Cooling System with a New Modelling Approach Based on Dynamic Neural Network

Thomas Koch, Olaf Toedter, Georg Blesinger, 2021 .

A Paradigm Shift in the Automotive Industry

Thomas Koch, Thomas Koch, 2016 .

THERMAL AND SORPTION STUDY OF FLAME-RESISTANT FIBERS

Thomas Koch, Ulrich J. Griesser, T. Koch, 2011 .

Stoichiometric Natural Gas Combustion in a Single Cylinder SI Engine and Impact of Charge Dilution by Means of EGR

Thomas Koch, T. Koch, K. Hoffmann, 2013 .

Microbial degradation of water miscible metal working fluids

Ekkard Brinksmeier, Thomas Koch, Andreas Rabenstein, 2009 .

Permanent magnet machines with fractional slot winding for electric traction

Andreas Binder, Thomas Koch, T. Koch, 2002 .

Characterization of Mixture Formation in a Direct Injected Spark Ignition Engine

Konstantinos Boulouchos, Thomas Koch, Katharina Schänzlin, 2001 .

Influence of Charge Motion and Injection Pressure on the Particulate Emission of a Gasoline DI-SI Engine at high Engine Load

Markus Bertsch, Thomas Koch, Amin Velji, 2015 .

Thermodynamic and Optical Investigations on Particle Emissions in a DISI Engine at Boosted Operation

Markus Bertsch, Thomas Koch, Amin Velji, 2015 .

Influence of Fuel Composition on Exhaust Emissions of a DISI Engine during Catalyst Heating Operation

Kai W. Beck, Thomas Koch, Ulrich Spicher, 2013 .

Characterization of the Combustion in a Direct Injection Spark Ignition Engine

Konstantinos Boulouchos, Thomas Koch, Katharina Schänzlin, 2002 .

Characterization and Phenomenological Modeling of Mixture Formation and Combustion in a Direct Injection Spark Ignition Engine

Konstantinos Boulouchos, Thomas Koch, Katharina Schänzlin, 2002 .

Analyse des dieselmotorischen Verbrennungsprozesses zur Potentialbewertung flexibler Einspritzverlaufsformungen = Analysis of Diesel Engine Combustion Processes to Assess the Potential of Flexible Injection Rate Shaping

Thomas Koch, Uwe Gärtner, Gerhard König, 2004 .

A model-based and experimental approach for the determination of suitable variable valve timings for cold start in partial load operation of a passenger car single-cylinder diesel engine

Uwe Wagner, Thomas Koch, T. Koch, 2018, International Journal of Engine Research.