Albert Foggia

发表

Analytical modeling and optimization of a radial permanent magnets synchronous machine

Frédéric Wurtz, Bill Sesanga, Albert Foggia, 2009 .

Some armature reaction compensation methods numerical design of experiments and optimization for a hybrid excitation machine

Albert Foggia, Afef Kedous-Lebouc, Jean-Claude Mipo, 2009, 2009 IEEE International Electric Machines and Drives Conference.

Design of a Combined Passive and Active Magnetic Shield Adapted to Electrical Machines

Albert Foggia, Laure-Line Rouve, Louis Schmerber, 2006 .

A new design technique based on a suitable choice of rotor geometrical parameters to maximize torque and power factor in synchronous reluctance motors. II. Finite-element analysis and measurements

Albert Foggia, Silvio Ikuyo Nabeta, José Roberto Cardoso, 1997 .

rotating electric machine having loss reduction means

Albert Foggia, Lilya Bouarroudj, Jean-Claude Mipo, 2005 .

Analysis of Shaft Voltages and Circulating Currents in the Parallel-Connected Windings in Large Synchronous Generators

Albert Foggia, Jean-Éric Torlay, Chantal Corenwinder, 2002 .

A rotary electrical machine with compensation of the magnetic armature reaction

Li Li, Albert Foggia, Jean-Claude Mipo, 2009 .

Rotor synchronous rotary electric machine, in particular motor vehicle alternator

Li Li, Albert Foggia, Jean-Claude Mipo, 2008 .

A new design technique based on a suitable choice of rotor geometrical parameters to maximize torque and power factor in synchronous reluctance motors. I. Theory

Albert Foggia, Silvio Ikuyo Nabeta, José Roberto Cardoso, 1997 .

Performance analysis and comparison of three IPMSM with high homopolar inductance for electric vehicle applications

Frederic Wurtz, Albert Foggia, Lauric Garbuio, 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

Optimization of Permanent Magnet Synchronous Machine for Electrical Vehicle Application

Frédéric Wurtz, Albert Foggia, Lauric Garbuio, 2012 .

Performance analysis of windings configuration on fractional-slots PMSM performance

Frederic Wurtz, Albert Foggia, Lauric Garbuio, 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).

Sine wave cancellation through a periodic transfer function

Christine Servière, Albert Foggia, Pierre Granjon, 1999, NSIP.

Active control of synchronous machine vibrations: an adaptive optimal MIMO controller

Christine Servière, Albert Foggia, Pierre Granjon, 2000, 2000 IEEE International Conference on Acoustics, Speech, and Signal Processing. Proceedings (Cat. No.00CH37100).

Active control of synchronous motor vibration

Albert Foggia, Pierre Granjon, Christine Serviere, 1998 .

OPTIMISATION OF A CLAW-POLE ALTERNATOR USING SOLID COFE ROTOR

Albert Foggia, Jean-Claude Mipo, Lauric Garbuio, 2013 .

synchronous rotating electric machine rotor with double excitation

Li Li, Albert Foggia, Jean-Claude Mipo, 2010 .

From General Finite Element Software to Engineering-focused Software

Yves Maréchal, Albert Foggia, X. Brunotte, 2006 .

A time-stepped finite-element simulation of a symmetrical short-circuit in a synchronous machine

Jean-Louis Coulomb, Albert Foggia, Silvio Ikuyo Nabeta, 1994 .

3D finite element investigation of the magnetic field outside electromagnetic devices

H. Kermorgant, Albert Foggia, Gérard Meunier, 1994 .

A 3D finite-element computation of eddy currents and losses in the stator end laminations of large synchronous machines

Albert Foggia, Gérard Meunier, V. C. Silva, 1996 .

Surface impedance method applied to the prediction of eddy currents in hydrogenerator stator end regions

Albert Foggia, Yves Marechal, V. C. Silva, 1995 .

A 3-D finite-element computation of eddy currents and losses in laminated iron cores allowing for electric and magnetic anisotropy

Albert Foggia, Gérard Meunier, V. C. Silva, 1995 .

Experimental and numerical study of a directly PV-assisted domestic hot water system

Frédéric Wurtz, Albert Foggia, Gilles Fraisse, 2011 .