Thomas Morel

发表

Theoretical lower limits of forebody drag

Thomas Morel, T. Morel, 1979, The Aeronautical Journal (1968).

Warmup Characteristics of a Spark Ignition Engine as a Function of Speed and Load

Rifat Keribar, Thomas Morel, 1990 .

Effect of insulation strategy and design parameters on diesel engine heat rejection and performance

Thomas Morel, Paul N. Blumberg, Edward F. Fort, 1985 .

Model for Heat Transfer and Combustion In Spark Ignited Engines and its Comparison with Experiments

Thomas Morel, C. I. Rackmil, R. Keribar, 1988 .

An Investigation of Structural Effects of Fiber Matrix Reinforcement in Aluminum Diesel Pistons

Rifat Keribar, Thomas Morel, Milton W. Toaz, 1990 .

Modeling of Engine Exhaust Acoustics

Thomas Morel, Rolf Jebasinski, John Silvestri, 1999 .

Study of Intake System Wave Dynamics and Acoustics by Simulation and Experiment

Michael Costello, Thomas Morel, John Silvestri, 1994 .

Examination of Key Issues in Low Heat Rejection Engines

Rifat Keribar, Thomas Morel, Paul N. Blumberg, 1986 .

Analysis of a 6 Cylinder Turbocharged HCCI Engine Using a Detailed Kinetic Mechanism

Fabian Mauss, Bengt Johansson, Thomas Morel, 2002 .

Experimental and Analytical Study of Heat Radiation in a Diesel Engine

Thomas Morel, Syed Wahiduzzaman, David P. DeWitt, 1987 .

Start-up of Port-Jérôme CRYOCAP™ Plant: Optimized Cryogenic CO2 Capture from H2 Plants

Thomas Morel, Richard Dubettier, Frederick Lockwood, 2017 .

Characterization of Flow Produced by a High-Swirl Inlet Port

Thomas Morel, Teoman Uzkan, Claus Borgnakke, 1983 .

Coupled 1-D/3-D Analysis of Fuel Injection and Diesel Engine Combustion

Song-Charng Kong, Thomas Morel, Babajide Kolade, 2004 .

Simulating the Effects of Fuel Injection on Combustion

Thomas Morel, Babajide Kolade, 2004 .

Fluid flow and heat transfer in reciprocating machinery : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Boston, Massachusetts, December 13-18, 1987

Thomas Morel, 1987 .

Aerodynamics of transportation : presented at the Joint ASME-CSME Applied Mechanics, Fluids Engineering, and Bioengineering Conference, Niagara Falls, New York, June 18-20, 1979

Thomas Morel, Charles Dalton, 1979 .

Heat Radiation in D.I. Diesel Engines

Rifat Keribar, Thomas Morel, 1986 .

Development of a Quasi-Steady Approach Based Simulation Tool for System Level Exhaust Aftertreatment Modeling

Thomas Morel, Seth Wenzel, Syed Wahiduzzaman, 2008 .

Comprehensive Design of Axisymmetric Wind Tunnel Contractions

Thomas Morel, T. Morel, 1975 .

“Virtual Engine/Powertrain/Vehicle” Simulation Tool Solves Complex Interacting System Issues

Rifat Keribar, Andy Leonard, Thomas Morel, 2003 .

Effect of Base Cavities on the Aerodynamic Drag of an Axisymmetric Cylinder

Thomas Morel, 1979 .

A New Approach to Integrating Engine Performance and Component Design Analysis Through Simulation

Rifat Keribar, Thomas Morel, Paul N. Blumberg, 1988 .

Flow Over Two Circular Disks in Tandem

Thomas Morel, T. Morel, M. Bohn, 1980 .

Design of Two-Dimensional Wind Tunnel Contractions

Thomas Morel, 1977 .

Cyclical Thermal Phenomena in Engine Combustion Chamber Surfaces

Rifat Keribar, Thomas Morel, Paul N. Blumberg, 1985 .

Characterization of Manifold Dynamics in the Chrysler 2.2 S.I. Engine by Measurements and Simulation

Thomas Morel, Michael F. Flemming, Leon a. LaPointe, 1990 .

Effect of Base Slant on Flow in the Near Wake of an Axisymmetric Cylinder

Thomas Morel, T. Morel, 1980 .

Thermal Shock Calculations in I.C. Engines

Rifat Keribar, Thomas Morel, T. Morel, 1987 .

An Improved Near Wall Heat Transfer Model for Multidimensional Engine Flow Calculations

Thomas Morel, Mark Jennings, 1990 .

Fluid mechanics of combustion systems

Thomas Morel, Robert P. Lohmann, T. Morel, 1981 .

A computational study of wall temperature effects on engine heat transfer

Thomas Morel, Mark Jennings, T. Morel, 1991 .

Effect of speed, load, and location on heat transfer in a diesel engine-measurements and predictions

Thomas Morel, Syed Wahiduzzaman, Dale R. Tree, 1987 .

A Model for Predicting Spatially and Time Resolved Convective Heat Transfer in Bowl-in-Piston Combustion Chambers

Rifat Keribar, Thomas Morel, T. Morel, 1985 .

Methods for heat transfer and temperature field analysis of the insulated diesel

Rifat Keribar, Thomas Morel, Paul N. Blumberg, 1984 .

Observations on the application of the k-ε model to internal combustion engine flows

Thomas Morel, Mark J. Jennings, 1988 .

Experimental Study of a Jet-Driven Helmholtz Oscillator

Thomas Morel, T. Morel, 1978 .

Aerodynamic Drag of Bluff Body Shapes Characteristic of Hatch-Back Cars

Thomas Morel, T. Morel, 1978 .

Heat Transfer Experiments in an Insulated Diesel

Thomas Morel, Syed Wahiduzzaman, Edward F. Fort, 1988 .

Integrated Engine/Vehicle Simulation and Control

Rifat Keribar, Thomas Morel, Thomas Morel, 1999 .