Geoff Dearden

发表

3D LASER FORMING OF SADDLE SHAPES

Stuart Edwardson, Ken Watkins, Geoff Dearden, 2001 .

Experimental study of radially and azimuthally polarized ultrafast laser beams

Stuart Edwardson, Geoff Dearden, J Ouyang, 2013 .

Ultrashort pulse periodic structuring of metallic surfaces

Stuart Edwardson, Ken Watkins, Geoff Dearden, 2012 .

A system for dynamic shape measurements during laser processing

Stuart Edwardson, Geoff Dearden, Julian D. C. Jones, 2002 .

Ablation of amorphous Polyethy(ethyl)letone (PEEK) by a femtosecond Ti:sapphire laser

Geoff Dearden, Walter Perrie, Qianliang Li, 2020, LASE.

An Investigation of Multi-pulse Laser Ignition in a GDI engine

Geoff Dearden, Tom Shenton, Elliott Lyon, 2014 .

Short Pulse Thermal Laser Micro-adjustment Technique

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2011 .

Forming a New Material

Wesley J. Cantwell, Stuart Edwardson, Geoff Dearden, 2004 .

Advances in Ultra Short Pulse Laser based Parallel Processing using a Spatial Light Modulator

Stuart Edwardson, Geoff Dearden, Walter Perrie, 2012 .

Multiple Pulse Laser Ignition Control Application in GDI Lean Combustion

Geoff Dearden, Tom Shenton, Zheng Kuang, 2015 .

Focus characteristics of long-distance flying optics

Ya Cheng, Guoliang Xu, Jinbo Jiang, 2000, Advanced High-Power Lasers and Applications.

Laser forming for the correction of distortion and design shape in aluminium structures (Invited paper)

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2006 .

Laser Forming for Ship Building Applications

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2008 .

Laser Ignition of an IC Test Engine using an Nd: YAG Laser and the Effect of Key Laser Parameters on Engine Combustion Performance

Geoff Dearden, Tom Shenton, Ken Watkins, 2005 .

Neural Network Prediction of Engine Performance for Second Pulse Fire/No Fire Decision Making in Dual Pulse Laser Ignited Engines

Geoff Dearden, Tom Shenton, Elliott Lyon, 2015 .

Laser Forming of Fibre Metal Laminates

Wesley J. Cantwell, Stuart Edwardson, Geoff Dearden, 2005 .

Initial studies of laser beam performance monitoring using a novel camera-based in-line beam monitoring system

Geoff Dearden, Paul French, Ken Watkins, 2001 .

Multi-Cylinder Laser and Spark Ignition in an IC Gasoline Automotive Engine: A Comparative Study

Geoff Dearden, Ken Watkins, A. T. Shenton, 2008 .

FE Model Updating for Damage Detection – Application to a Welded Structure

Huajiang Ouyang, Geoff Dearden, Hamed Haddad Khodaparast, 2009 .

Dynamic wavefront and polarisation control for ultrashort-pulse laser microprocessing (Invited Keynote)

Geoff Dearden, O. J. Allegre, Walter Perrie, 2014 .

Diffractive Multi-Beam Ultra-fast Laser Micro-processing using a Spatial Light Modulator

Stuart Edwardson, Ken Watkins, Geoff Dearden, 2009 .

Synchronization control for ultrafast laser parallel microdrilling system

Dun Liu, Geoff Dearden, Zhongsheng Zhai, 2014, Photonics Asia.

Towards Controlled 3D Laser Forming

Stuart Edwardson, Ken Watkins, Geoff Dearden, 2010 .

Laser Ignition in an Automotive Engine: Analysis and Control of C.O.V. in I.M.E.P. and P.P.P.

Geoff Dearden, Tom Shenton, Stephan Daren Carroll, 2005 .

The opportunities and challenges associated with wireless interconnects in aircraft

Andy Marvin, P. Sewell, C. Christopoulos, 2010 .

Prospects for Laser Ignition in Gasoline Control

Geoff Dearden, Tom Shenton, Paul Dickinson, 2010 .

Ultrafast laser parallel processing of materials

Stuart Edwardson, Ken Watkins, Geoff Dearden, 2011 .

Calibration of Ignition Location and Pulse Energy in the Laser Ignited Engine

Geoff Dearden, Tom Shenton, Elliott Lyon, 2014 .

Finite Element Modelling of the Laser Forming of AISI 1010 Steel

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2010 .

Factors influencing the bend per pass in multi-pass laser forming

Ken Watkins, Geoff Dearden, G. Dearden, 2007 .

Diffractive Multi-Beam Ultra Fast Laser Processing by Using a Spatial Light Modulator

Stuart Edwardson, Ken Watkins, Geoff Dearden, 2008 .

Optical trapping for engineering manufacture

Lin Li, Zengbo Wang, Stuart Edwardson, 2007 .

Real-time control of polarisation in high-aspect-ratio ultra-short-pulse laser micro-machining

Ken Watkins, Geoff Dearden, O. J. Allegre, 2010 .

Blast and impact resistance studies of laser welded and riveted panel structures

Graham Schleyer, Ken Watkins, Geoff Dearden, 2002 .

Ultrafast laser internal structuring of materials with a spatial light modulator

Stuart Edwardson, Ken Watkins, Geoff Dearden, 2013 .

Laser peen forming of thin sheet ferrous materials

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2006 .

Multiple NUV femtosecond laser beam direct writing of volume Bragg gratings

Stuart Edwardson, Ken Watkins, Geoff Dearden, 2012 .

Multi-point laser ignition of internal combustion engines using a spatial light modulator

Geoff Dearden, Tom Shenton, Elliott Lyon, 2014 .

Finite-element modelling and updating of laser spot weld joints in a top-hat structure for dynamic analysis

Huajiang Ouyang, Geoff Dearden, Hamed Haddad Khodaparast, 2010 .

Multiple pulse laser ignition in GDI lean combustion

Geoff Dearden, Tom Shenton, Elliott Lyon, 2016 .

Control method for 3D laser forming based on geometrical data

Geoff Dearden, Ken Watkins, K. Bartkowiak, 2007 .

Correction of distortion and design shape in aluminium structures using laser forming

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2006 .

Advances in ultra short pulsed parallel processing using a spatial light modulator

Ken Watkins, Geoff Dearden, Walter Perrie, 2012 .

Laser forming: Overview of the controlling factors in the temperature gradient mechanism

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2010 .

Towards controlled three-dimensional laser forming

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2012 .

Goal Driven Optimization of Process Parameters for Maximum Efficiency in Laser Bending of Advanced High Strength Steels

Geoff Dearden, Mike Riley, Jonathan David Griffiths, 2015 .

Laser forming looks in good shape

Stuart Edwardson, Ken Watkins, Geoff Dearden, 2006 .

Modeling of real temporally variant beam shapes in laser materials processing

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2011 .

Embedding arrays of microspheres with optical trapping for micro scale device manufacture

Stuart Edwardson, Ken Watkins, Geoff Dearden, 2010 .

Optimum deposition parameters for the direct laser fabrication (DLF) of quasi-hollow structures

Geoff Dearden, Ken Watkins, Eamonn Fearon, 2006 .

Modal testing and finite element model updating of laser spot welds

Huajiang Ouyang, Geoff Dearden, Hamed Haddad Khodaparast, 2009 .

Reverse analysis of scan strategies for controlled 3D laser forming of sheet metal

Stuart Edwardson, Geoff Dearden, H. Gao, 2017 .

Laser Peen Forming for Non-thermal Forming of Sensitive Components

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2008 .

Closed Loop 3-Dimensional Laser Forming of Developable Surfaces

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2005 .

Effect of Post Forming Heat Treatments on Laser Formed Components

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2008 .

OPTICAL TRAPPING FOR ENGINEERING MANUFACTURE Paper M1106

Geoff Dearden, Walter Perrie, Philip Crouse, 2007 .

Ultrafast laser processing with the aid of Spatial Light Modulators

Stuart Edwardson, Geoff Dearden, O. J. Allegre, 2013 .

Development of 2D and 3D laser forming strategies for thin section materials using scanning optics

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2004 .

Generation of 3D Shapes Using a Laser Forming Technique

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2001 .

Sensing for monitoring of the laser-GMAW hybrid welding process

Geoff Dearden, Edward William Reutzel, Ken Watkins, 2004 .

Geometrical based control method for 3D laser forming

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2007 .

Optical Near-field Interaction Between Neighboring Micro/Nano-particles

Zengbo Wang, Wei Guo, Geoff Dearden, 2007 .

Ultrashort pulse laser patterning of indium tin oxide thin films on glass by uniform diffractive beam patterns

Stuart Edwardson, Geoff Dearden, Walter Perrie, 2012 .

A thermal investigation on conductive silver ink tracks cured on flexible substrates by repeating irradiations of Nd:YAG laser at the wavelength of 532 nm

Stuart Edwardson, Geoff Dearden, Walter Perrie, 2012 .

Metal ablation study with a 10 picosecond laser under low and median fluence

Stuart Edwardson, Geoff Dearden, Walter Perrie, 2020 .

Fast parallel diffractive multi-beam femtosecond laser surface micro-structuring

Stuart Edwardson, Geoff Dearden, Walter Perrie, 2009 .

An experimental study of laser micro-forming using a pulsed Nd:YAG laser and scanning optics

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2003 .

'Laser forming of thin section non ferrous metals with a Nd:YAG laser source'

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2005 .

Imaging-based amplitude laser beam shaping for material processing by 2D reflectivity tuning of a spatial light modulator.

Stuart Edwardson, Geoff Dearden, Walter Perrie, 2016, Applied optics.

Ultrafast parallel laser processing of materials for high throughput manufacturing

Stuart Edwardson, Geoff Dearden, Walter Perrie, 2009 .

Surface plasmon polaritons for micro and nano-texturing of metal surfaces

Stuart Edwardson, Geoff Dearden, Walter Perrie, 2009 .

CdSe nanoparticles synthesized by laser ablation

Geoff Dearden, Walter Perrie, Ken Watkins, 2008 .

Nanoparticle formation by the debris produced by femtosecond laser ablation of silicon in ambient air

Stuart Edwardson, Geoff Dearden, Walter Perrie, 2008 .

A review of ultrafast laser materials micromachining

Geoff Dearden, Walter Perrie, Jian Cheng, 2013 .

Laser forming of metal laminate composite materials

Wesley J. Cantwell, Stuart Edwardson, Geoff Dearden, 2003 .

Multi-location laser ignition using a spatial light modulator towards improving automotive gasoline engine performance

Geoff Dearden, Tom Shenton, Elliott Lyon, 2017 .

High throughput diffractive multi-beam femtosecond laser processing using a spatial light modulator

Stuart Edwardson, Geoff Dearden, Miles J. Padgett, 2008 .

The influence of beam energy, mode and focal length on the control of laser ignition in an internal combustion engine

Geoff Dearden, Ken Watkins, Andy David Scarisbrick, 2007 .

Laser ignition - Spark plug development and application in reciprocating engines

Dieter Brüggemann, Geoff Dearden, Gabriela Croitoru, 2018 .

Picosecond laser patterning of PEDOT:PSS thin films

Stuart Edwardson, Geoff Dearden, Ken Watkins, 2011 .

Laser ignited engines: progress, challenges and prospects.

Geoff Dearden, Tom Shenton, G. Dearden, 2013, Optics express.

NUV femtosecond laser inscription of volume Bragg gratings in poly(methyl)methacrylate with linear and circular polarizations

Patricia Scully, Stuart Edwardson, Geoff Dearden, 2013 .

The effects of multiple passes of a Gaussian laser beam to cure silver loaded polymeric inks

Geoff Dearden, Ken Watkins, T Sato, 2008 .

Laser Forming of Aerospace Alloys

R. L. Cooke, Stuart Edwardson, Geoff Dearden, 2001 .

Laser microprocessing of steel with radially and azimuthally polarized femtosecond vortex pulses

Stuart Edwardson, Geoff Dearden, O. J. Allegre, 2012 .

Diffractive multi-beam surface micro-processing using 10 ps laser pulses

Stuart Edwardson, Geoff Dearden, Walter Perrie, 2009 .

Laser welding of aluminium alloy 5083

Geoff Dearden, Ken Watkins, Martin Sharp, 2002 .