Tai Chiu Lee

发表

Strain Path Analysis of an Axisymmetric Part within Controlled Forming Process

Lin Wang, Tai Chiu Lee, Li Li Liu, 2004 .

Experimental study on the shearing behaviour of fine-blanking versus bar cropping

Tai Chiu Lee, Luen Chow Chan, B. J. Wu, 1998 .

Process modeling of controlled forming with time variant blank holder force using RSM method

Lin Wang, Tai Chiu Lee, Luen Chow Chan, 2007 .

Controlled strain path forming process with space variant blank holder force using RSM method

Lin Wang, Tai Chiu Lee, Tai-chiu Lee, 2005 .

The Solution of a Multi-Objective Tool Selection Model Using the GA Approach

Tai Chiu Lee, W. H. Ip, K. W. Keung, 2001 .

Straining behaviour in blanking process - fine blanking vs conventional blanking

Tai Chiu Lee, Luen Chow Chan, B. J. Wu, 1995 .

A study on the precision modeling of the bars produced in two cross-roll straightening

Tai Chiu Lee, Luen Chow Chan, B. J. Wu, 2000 .

The effect of yield criteria on the forming limit curve prediction and the deep drawing process simulation

Lin Wang, Tai Chiu Lee, Tai-chiu Lee, 2006 .

Experimental Study on Large Deformation in Fine-Blanking Process by Implementing Different Stripper Designs: Vee-Ring Type Vs. Plate-Type

Tai Chiu Lee, Y. C. Leung, Luen Chow Chan, 2000 .

Prediction of limiting dome height using neural network and finite element method

Lin Wang, Tai Chiu Lee, 2006 .