Takashi Miyoshi

发表

Optical inverse scattering phase method for nano-in-process measurement of microsurface profile

Atsushi Taguchi, Takashi Miyoshi, Yasuhiro Takaya, 2002, Other Conferences.

Detection of Defects on the Surface of a Cam Shaft Using Laser Scattering Method

Takashi Miyoshi, Yasuhiro Takaya, Shuichi Dejima, 2005 .

F-0522 Dynamically Controlled Cure Process in Micro-stereolithography using LCD Mask

Takashi Miyoshi, Yasuhiro Takaya, Satoru Takahashi, 2001 .

Computer Simulation for Laser Trapping on Micro - particles with Arbitrary Shapes

Jian Bai, Takashi Miyoshi, Yasuhiro Takaya, 1999 .

Knowledge Acquisition and Automation of Polishing Operation for Injection Mold(2nd Report). Expert System for Mold and Die Polishing Operation.

Takashi Miyoshi, Tetsuo Sasaki, Katsumasa Saitoh, 1991 .

Micromachined Profile Measurement by Means of Optical Inverse Scattering Phase Method

Takashi Miyoshi, Yasuhiro Takaya, Katsumasa Saito, 1996 .

Optical ring-image 3-D profile sensor

Takashi Miyoshi, Yasuhiro Takaya, Y. Takaya, 1993, Other Conferences.

Evaluation of laser trapping probe properties for coordinate measurement

Takashi Miyoshi, Yasuhiro Takaya, Terutake Hayashi, 2006, SPIE Optics East.

Reduction of Cogging Torque in DC Brushless Motors for Electric Power Steering

Takashi Miyoshi, Atsuhiko Yoneda, Yasuo Shimizu, 2008 .

Construction of Micro Drop Application System with Visual Feedback.

Hiroshi Mizoguchi, Takashi Miyoshi, Hideki T. Miyazaki, 1997 .

A Simple Method to Continuous Measurement of Energy Consumption of Tank Less Gas Water Heaters for Commercial Buildings

Takashi Miyoshi, Miwako Fujita, Motoi Yamaha, 2006 .

Estimation of the size parameters of fine rectangular grooves based on Fraunhofer diffraction

Takashi Miyoshi, Yasuhiro Takaya, 1992, Other Conferences.

Nonlaminate micro photo-sterolithography using LCD live-motion mask

Takashi Miyoshi, Yasuhiro Takaya, Satoru Takahashi, 2003, International Congress on Laser Advanced Materials Processing.

Knowledge Acquisition and Automation of Polishing Operation for Injection Mold (3rd Report)

Takashi Miyoshi, Tetsuo Sasaki, Katsumasa Saitoh, 1992 .

High-precision on-machine 3D shape measurement using hypersurface calibration method

Takashi Miyoshi, Yasuhiro Takaya, Taeho Ha, 2004, SPIE Optics East.

Particle detection for patterned wafers of 100nm design rule by evanescent light illumination: analysis of evanescent light scattering using finite-difference time-domain (FDTD) method

Takashi Miyoshi, Yasuhiro Takaya, Toshie Yoshioka, 2005, International Symposium on Optomechatronic Technologies.

Recent development of nitride LEDs and LDs

Takashi Miyoshi, Takashi Mukai, Masahiko Sano, 2009, OPTO.

Three-dimensional laser inverse scattering phase method for evaluating microstructure

Atsushi Taguchi, Takashi Miyoshi, Yasuhiro Takaya, 2000, Optics and Optoelectronic Inspection and Control.

Dynamic properties measurement of vibrating microprobe for nano-position sensing using radiation pressure control

Takashi Miyoshi, Yasuhiro Takaya, Shuichi Dejima, 2005, SPIE Optics + Photonics.

Laser Applied Nano-inprocess Measurement Technology

Takashi Miyoshi, 1999 .

Rotational micromachining tool controlled by optical radiation pressure

Takashi Miyoshi, Yasuhiro Takaya, Kenji Shirai, 2003, International Symposium on Laser Precision Microfabrication.

Microfabrication of overhanging shape using LCD microstereolithography

Takashi Miyoshi, Yasuhiro Takaya, Keiichi Kimura, 2004, International Symposium on Laser Precision Microfabrication.

Novel nano-defect measurement method of SOI wafer using evanescent light

Takashi Miyoshi, Yasuhiro Takaya, Ryusuke Nakajima, 2005, SPIE Optics East.

Non-contact 3D edge profile measurement for die and mould model surface

Takashi Miyoshi, Yasuhiro Takaya, Satoru Takahashi, 2002 .

The 3D manipulation of a microsphere for nano-CMM probe using single fiber optical trapping

Takashi Miyoshi, Yasuhiro Takaya, Terutake Hayashi, 2006, SPIE Optics + Photonics.

GaN-Based High-Output-Power Blue Laser Diodes

Takashi Miyoshi, Takashi Mukai, Yasushi Fujimura, 2008 .

On-Machine Cutting Edge Profile Measurement for Micro Milling Tool (1st Report, Laser Diffraction Gauge Method and its Verifications)

Takashi Miyoshi, Yasuhiro Takaya, Takashi Harada, 2004 .

Noncontact 3D shape inspection based on optical ring imaging system

Takashi Miyoshi, Saburo Okada, Hidekazu Miyauchi, 1997, Other Conferences.

New mass measurement method of aerosol particle using vibrating probe particle controlled by radiation pressure

Takashi Miyoshi, Yasuhiro Takaya, Tatsuo Hariyama, 2005, SPIE Optics East.

Design-model-based in-process measuring method of a three-dimensional microprofile by employing the laser inverse scattering phase-reconstruction method

Takashi Miyoshi, Yasuhiro Takaya, Satoru Takahashi, 1998, Other Conferences.

On-Machine Cutting Edge Profile Measurement for Micro Milling Tool (2nd Report, Micro Endmill (.PHI.300.MU.m) Wear Measurement and Evaluation)

Takashi Miyoshi, Yasuhiro Takaya, Takashi Harada, 2006 .

Automation of Polishing Process for a Cavity Surface on Dies and Molds by Using an Expert System

Takashi Miyoshi, Katsumasa Saito, T. Sasaki, 1993 .

Optical radiation pressure micromachining using a small particle

Takashi Miyoshi, Satoshi Kiyono, Hiroki Shimizu, 2000, International Symposium on Laser Precision Microfabrication.

Remarkably Suppressed Luminescence Inhomogeneity in a (0001) InGaN Green Laser Structure

Takashi Miyoshi, Yoichi Kawakami, Shin-ichi Nagahama, 2013 .

Optical 3D profilometer for in-process measurement of microsurface based on phase retrieval technique

Atsushi Taguchi, Takashi Miyoshi, Yasuhiro Takaya, 2004 .

Vibrational Probing Technique for the Nano-CMM based on Optical Radiation Pressure Control

Takashi Miyoshi, Yasuhiro Takaya, N. Kinoshita, 2004 .

Size determination of microscratches on silicon oxide wafer surface using scattered light

Takashi Miyoshi, Yasuhiro Takaya, Taeho Ha, 2003 .

Knowledge acquisition and automation of polishing operations for injection mold. (1st report). Hand polishing properties of a skilled machinist.

Takashi Miyoshi, Katsumasa Saito, Katsumasa Saito, 1991 .

Development of Non-contact Profile Sensor for 3-D Free-form Surfaces (1st Report)

Takashi Miyoshi, Katsumasa Saito, Hiroshi Aoki, 1992 .

510–515 nm InGaN-Based Green Laser Diodes on c-Plane GaN Substrate

Takashi Miyoshi, Takashi Mukai, Takeshi Okada, 2009 .

52.3: High ‐ Power InGaN Blue ‐ Laser Diodes for Displays

Takashi Miyoshi, Takashi Mukai, Yasushi Fujimura, 2005 .

InGaN‐based 518 and 488 nm laser diodes on c‐plane GaN substrate

Takashi Miyoshi, Takashi Mukai, Takeshi Okada, 2010 .

Optical Gain Spectra of a (0001) InGaN Green Laser Diode

Takashi Miyoshi, Yoichi Kawakami, Shin-ichi Nagahama, 2013 .

In-Process Measurement Method for Detection and Discrimination of Silicon Wafer Surface Defects by Laser Scattered Defect Pattern

Takashi Miyoshi, Yasuhiro Takaya, Katsumasa Saito, 1998 .

67.4: GaN‐Based High‐Power Blue Laser Diodes for Display Applications

Takashi Miyoshi, Takashi Mukai, Yasushi Fujimura, 2006 .

Fundamental Analysis on the Novel 3-D Probing Technique for Micro-parts Using the Optical Fiber Trapping

Takashi Miyoshi, Yasuhiro Takaya, Takaki Hashimoto, 2003 .

In-Process Error Compensation for Tooth Form Grinding Works : Robust Error Estimation Algorithm against the Measuring Error and Experimental Result of the In-Process Grinding Error Compensation

Takashi Miyoshi, Takashi Harada, Kazuhiro Kotani, 2001 .

3-D shape measurement of free-form machined surfaces by optical ring imaging system

Takashi Miyoshi, Saburo Okada, Hidekazu Miyauchi, 1998, IECON '98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.98CH36200).

B-Spline Curve Fitting onto Measured Point Data under Consideration of Curvature.

Takashi Miyoshi, Yasuhiro Takaya, Takayuki Gotoh, 1994 .

High Sensitivity Optical Detection of Oriented Microdefects on Silicon Wafer Surfaces Using Annular Illumination

Takashi Miyoshi, Yasuhiro Takaya, Shoichi Shimada, 2001 .

Development of an automatic non-contact measuring system of 3-D model shapes for injection molds.

Takashi Miyoshi, Katsumasa Saito, Tomohiko Nakamura, 1989 .

Study on the Manufacturing Method of the Motor Cores to Reduce the Cogging Torque

Takashi Miyoshi, Takashi Yoshioka, Yuji Nakahara, 2007 .

Development of non-contact 3-D digitizing system.

Takashi Miyoshi, Tsukasa Kondo, Katsumasa Saito, 1990 .

Nanometer measurement of silicon wafer surface texture based on Fraunhofer diffraction pattern

Takashi Miyoshi, Yasuhiro Takaya, Katsumasa Saito, 1995 .

Nano-Position Sensing Using Optically Motion-controlled Microprobe with PSD Based on Laser Trapping Technique

Takashi Miyoshi, Yasuhiro Takaya, Shuichi Dejima, 2005 .

Cogging Torque Target and Design of Motor for EPS

Takashi Miyoshi, Atsuhiko Yoneda, A. Yoneda, 2006 .

Development of The Nano-CMM Probe based on Laser Trapping Technology

Takashi Miyoshi, Yasuhiro Takaya, Katsumasa Saito, 1999 .

Development of Optical Ring Image Sensor for 3D Profile Measurement of Machined Metal Surface. Light Scattering Simulation of Metal Surface and Its Verification.

Takashi Miyoshi, Yasuhiro Takaya, Satoru Takahashi, 1999 .

INTERNAL DEFECT DETECTION IN THE VICINITY OF SI WAFER SURFACE USING EVANESCENT WAVE

Takashi Miyoshi, Yasuhiro Takaya, Ryusuke Nakajima, 2003 .

3D Micro-Profile Measurement using Optical Inverse Scattering Phase Method

Atsushi Taguchi, Takashi Miyoshi, Yasuhiro Takaya, 2000 .

Blue and green laser diodes for large laser display

Takashi Miyoshi, Shin-ichi Nagahama, Tomoya Yanamoto, 2013, 2013 Conference on Lasers and Electro-Optics Pacific Rim (CLEOPR).