Yasuhiro Takaya

发表

Optical inverse scattering phase method for nano-in-process measurement of microsurface profile

Atsushi Taguchi, Takashi Miyoshi, Yasuhiro Takaya, 2002, Other Conferences.

Detection of Defects on the Surface of a Cam Shaft Using Laser Scattering Method

Takashi Miyoshi, Yasuhiro Takaya, Shuichi Dejima, 2005 .

F-0522 Dynamically Controlled Cure Process in Micro-stereolithography using LCD Mask

Takashi Miyoshi, Yasuhiro Takaya, Satoru Takahashi, 2001 .

Tool condition monitoring technique for deep-hole drilling of large components based on chatter identification in time–frequency domain

Yasuhiro Takaya, Masahiro Uekita, Y. Takaya, 2017 .

Scanning Type Microprobe for Displacement Measurement Based on Standing Wave Detection Using an Optically Trapped Particle

Yasuhiro Takaya, Terutake Hayashi, Masaki Michihata, 2011, Int. J. Autom. Technol..

Scanning dimensional measurement using laser-trapped microsphere with optical standing-wave scale

Yasuhiro Takaya, Satoru Takahashi, Kiyoshi Takamasu, 2017 .

Predictive Control Type Manufacturing System Based on Connected Smart In-process and On-machine Measuring Systems

Yasuhiro Takaya, 2020 .

Advanced Manufacturing Metrology in Context of Industry 4.0 Model

Yasuhiro Takaya, Slavenko M. Stojadinović, Vidosav D. Majstorović, 2019 .

Fundamental investigation for stochastic metrology with multi-sensors for micro-system technology: In case of optical path length

Yasuhiro Takaya, Masaki Michihata, P. D. Tran, 2013 .

Particle Detection for 100-nm Patterned Wafers by Evanescent Light Illumination - Analysis of Evanescent Light Scattering Using Finite-Difference Time-Domain Method -

Yasuhiro Takaya, Toshie Yoshioka, Takashi Miyoshi, 2006, J. Robotics Mechatronics.

Profile measurement using standing wave trapping

Yasuhiro Takaya, Terutake Hayashi, Masaki Michihata, 2011, NanoScience + Engineering.

Computer Simulation for Laser Trapping on Micro - particles with Arbitrary Shapes

Jian Bai, Takashi Miyoshi, Yasuhiro Takaya, 1999 .

Dynamic properties of a micro-sphere optically trapped in air by radially polarized laser beam

Yasuhiro Takaya, Terutake Hayashi, Masaki Michihata, 2009, NanoScience + Engineering.

D34 Development of Integrated Micro Optical Systems using DNA Self-recognition

Yasuhiro Takaya, Terutake Hayashi, Masaki Michihata, 2014 .

Optomechatronic Sensors and Instrumentation III

Hong Zhao, Yasuhiro Takaya, Pavel Tománek, 2007 .

Numerical analysis of fluid resistance exerted on vibrating micro-sphere controlled by optical radiation pressure

Yasuhiro Takaya, Terutake Hayashi, Shimpei Tanaka, 2008, NanoScience + Engineering.

Micromachined Profile Measurement by Means of Optical Inverse Scattering Phase Method

Takashi Miyoshi, Yasuhiro Takaya, Katsumasa Saito, 1996 .

Optical ring-image 3-D profile sensor

Takashi Miyoshi, Yasuhiro Takaya, Y. Takaya, 1993, Other Conferences.

LCD Microstereolithography of Photosensitive Resin with Functional Particles

Yasuhiro Takaya, Terutake Hayashi, Dongkeon Lee, 2008, Int. J. Autom. Technol..

Micro-probing system for coordinate metrology using a particle controlled by optical radiation pressure based on standing wave scale sensing method

Yasuhiro Takaya, Terutake Hayashi, Masaki Michihata, 2013, Other Conferences.

Evaluation of laser trapping probe properties for coordinate measurement

Takashi Miyoshi, Yasuhiro Takaya, Terutake Hayashi, 2006, SPIE Optics East.

Surface Inspection of Micro Glass Lens Mold Based on Total Angle Resolved Scattering Characterization

Yasuhiro Takaya, Terutake Hayashi, Yuki Nakatsuka, 2010, Int. J. Autom. Technol..

Estimation of the size parameters of fine rectangular grooves based on Fraunhofer diffraction

Takashi Miyoshi, Yasuhiro Takaya, 1992, Other Conferences.

Nonlaminate micro photo-sterolithography using LCD live-motion mask

Takashi Miyoshi, Yasuhiro Takaya, Satoru Takahashi, 2003, International Congress on Laser Advanced Materials Processing.

Fundamental Study on Novel On-Machine Measurement Method of a Cutting Tool Edge Profile with a Fluorescent Confocal Microscopy

Yasuhiro Takaya, Yasuhiro Mizutani, Masaki Michihata, 2016, Int. J. Autom. Technol..

EDITORIAL: Advances in Measurement Technology and Intelligent Instruments for Production Engineering

Wei Gao, Yasuhiro Takaya, Michael Krystek, 2008 .

Hybrid probing technique for coordinate measurement with optically trapped micro sphere

Yasuhiro Takaya, Yasuhiro Mizutani, Yuki Yamaguchi, 2016, SPIE/COS Photonics Asia.

Optomechatronic Sensors, Instrumentation, and Computer-Vision Systems

Yasuhiro Takaya, Jonathan Kofman, J. Kofman, 2006 .

High-precision on-machine 3D shape measurement using hypersurface calibration method

Takashi Miyoshi, Yasuhiro Takaya, Taeho Ha, 2004, SPIE Optics East.

Advances in measurement technology and intelligent instruments for manufacturing engineering

Wei Gao, Yasuhiro Takaya, Michael Krystek, 2010 .

In-situ evaluation of nanoparticle diameter for visualizing self-assembly process

Yasuhiro Takaya, Terutake Hayashi, Satoshi Ota, 2008, International Symposium on Laser Metrology.

Automatic 3D-Laser Scattering Measurement for Ultra-Finished Surface with Nanowatt Sensitivity

Yasuhiro Takaya, Tae Ho Ha, Takashi Miyoshi, 2004, J. Robotics Mechatronics.

Particle detection for patterned wafers of 100nm design rule by evanescent light illumination: analysis of evanescent light scattering using finite-difference time-domain (FDTD) method

Takashi Miyoshi, Yasuhiro Takaya, Toshie Yoshioka, 2005, International Symposium on Optomechatronic Technologies.

Evaluation technology of micro three-dimensional structure using phase-shifting digital holography

Yasuhiro Takaya, Terutake Hayashi, Yoshiaki Kiyama, 2010 .

Development of the nano-probe system based on the laser-trapping technique

Yasuhiro Takaya, Terutake Hayashi, Masaki Michihata, 2008 .

Three-dimensional laser inverse scattering phase method for evaluating microstructure

Atsushi Taguchi, Takashi Miyoshi, Yasuhiro Takaya, 2000, Optics and Optoelectronic Inspection and Control.

Single-pixel imaging by Hadamard transform and its application for hyperspectral imaging

Yasuhiro Takaya, Kyuki Shibuya, Yasuhiro Mizutani, 2016, SPIE/COS Photonics Asia.

Dynamic properties measurement of vibrating microprobe for nano-position sensing using radiation pressure control

Takashi Miyoshi, Yasuhiro Takaya, Shuichi Dejima, 2005, SPIE Optics + Photonics.

Ghost imaging for weak light imaging by using arrival time of photon and deep learning

Yasuhiro Takaya, Yasuhiro Mizutani, Shoma Kataoka, 2020, Other Conferences.

Circular motion control of an optically trapped microprobe for nano-position sensing

Yasuhiro Takaya, Terutake Hayashi, Yuto Nagasaka, 2007, SPIE NanoScience + Engineering.

Rotational micromachining tool controlled by optical radiation pressure

Takashi Miyoshi, Yasuhiro Takaya, Kenji Shirai, 2003, International Symposium on Laser Precision Microfabrication.

Microfabrication of overhanging shape using LCD microstereolithography

Takashi Miyoshi, Yasuhiro Takaya, Keiichi Kimura, 2004, International Symposium on Laser Precision Microfabrication.

Editorial: Measurement Technology for Process and Product Quality Control

Yasuhiro Takaya, Tomohiko Maeda, Y. Takaya, 2014, Int. J. Autom. Technol..

High Precision Tool Cutting Edge Monitoring Using Laser Diffraction for On-Machine Measurement

Yasuhiro Takaya, Keisuke Suzuki, Panart Khajornrungruang, 2012, Int. J. Autom. Technol..

Measurement of probe-stylus sphere diameter for micro-CMM based on spectral fingerprint of whispering gallery modes

Yasuhiro Takaya, Atsushi Adachi, Terutake Hayashi, 2014 .

Innovative Manufacturing Based on Converging Technology Driven by Intelligent Nano-measurement

Yasuhiro Takaya, 2010 .

Novel nano-defect measurement method of SOI wafer using evanescent light

Takashi Miyoshi, Yasuhiro Takaya, Ryusuke Nakajima, 2005, SPIE Optics East.

Non-contact 3D edge profile measurement for die and mould model surface

Takashi Miyoshi, Yasuhiro Takaya, Satoru Takahashi, 2002 .

Time-Resolved Oblique Incident Interferometry for Vibration Analysis of an Ultrasonic Motor

Yasuhiro Takaya, Yasuhiro Mizutani, Tetsuo Iwata, 2017, Int. J. Autom. Technol..

On-machine dimensional measurement of large parts by compensating for volumetric errors of machine tools

Yasuhiro Takaya, Masahiro Uekita, 2016 .

The 3D manipulation of a microsphere for nano-CMM probe using single fiber optical trapping

Takashi Miyoshi, Yasuhiro Takaya, Terutake Hayashi, 2006, SPIE Optics + Photonics.

Spin Hall effect of light applied in optical linear scale

Yasuhiro Takaya, Yasuhiro Mizutani, Kazunori Ueda, 2016, SPIE/COS Photonics Asia.

Preface to the Special Issue on Metrology for Leading Edge Manufacturing

Yasuhiro Takaya, 2015 .

On-Machine Cutting Edge Profile Measurement for Micro Milling Tool (1st Report, Laser Diffraction Gauge Method and its Verifications)

Takashi Miyoshi, Yasuhiro Takaya, Takashi Harada, 2004 .

Editorial: Measurement and Quality Control

Yasuhiro Takaya, 2011, Int. J. Autom. Technol..

New mass measurement method of aerosol particle using vibrating probe particle controlled by radiation pressure

Takashi Miyoshi, Yasuhiro Takaya, Tatsuo Hariyama, 2005, SPIE Optics East.

In-Process and On-Machine Measurement of Machining Accuracy for Process and Product Quality Management: A Review

Yasuhiro Takaya, 2014, Int. J. Autom. Technol..

The high precision measurement of the minute shape by the UA3P series

Yasuhiro Takaya, Motoo Yokaichiya, Takanori Funabashi, 2011 .

Design-model-based in-process measuring method of a three-dimensional microprofile by employing the laser inverse scattering phase-reconstruction method

Takashi Miyoshi, Yasuhiro Takaya, Satoru Takahashi, 1998, Other Conferences.

Study on Nanoparticle Sizing Using Fluorescent Polarization Method with DNA Fluorescent Probe

Yasuhiro Takaya, Terutake Hayashi, Masaki Michihata, 2015, Int. J. Autom. Technol..

Tool condition monitoring for form milling of large parts by combining spindle motor current and acoustic emission signals

Yasuhiro Takaya, Masahiro Uekita, Y. Takaya, 2017 .

On-Machine Cutting Edge Profile Measurement for Micro Milling Tool (2nd Report, Micro Endmill (.PHI.300.MU.m) Wear Measurement and Evaluation)

Takashi Miyoshi, Yasuhiro Takaya, Takashi Harada, 2006 .

DNA autonomous joint for micro self-assembly

Yasuhiro Takaya, Terutake Hayashi, Masaki Michihata, 2011 .

Ghost imaging with probability estimation using convolutional neural network: improving estimation accuracy using parallel convolutional neural network

Yasuhiro Takaya, Yasuhiro Mizutani, Shoma Kataoka, 2021, Other Conferences.

First Step Toward Laser Micromachining Realization by Photonic Nanojet in Water Medium

Yasuhiro Takaya, Yasuhiro Mizutani, Tsutomu Uenohara, 2021, Int. J. Autom. Technol..

Shape control using hologram-assisted talbot lithography

Yasuhiro Takaya, Yasuhiro Mizutani, Tsutomu Uenohara, 2021, Other Conferences.

Intelligent Nano-Measurement as the Creator of Innovative Manufacturing Technology

Yasuhiro Takaya, 2021, Journal of the Japan Society for Precision Engineering.

In-Process Height Displacement Measurement Using Crossed Line Beams for Process Control of Laser Wire Deposition

Yasuhiro Takaya, Yasuhiro Mizutani, Shigeru Takushima, 2021, Int. J. Autom. Technol..

Optical 3D profilometer for in-process measurement of microsurface based on phase retrieval technique

Atsushi Taguchi, Takashi Miyoshi, Yasuhiro Takaya, 2004 .

Novel contact probing method using single fiber optical trapping probe

Yasuhiro Takaya, Terutake Hayashi, Sang In Eom, 2009 .

Vibrational Probing Technique for the Nano-CMM based on Optical Radiation Pressure Control

Takashi Miyoshi, Yasuhiro Takaya, N. Kinoshita, 2004 .

Size determination of microscratches on silicon oxide wafer surface using scattered light

Takashi Miyoshi, Yasuhiro Takaya, Taeho Ha, 2003 .

Measurement of axial and transverse trapping stiffness of optical tweezers in air using a radially polarized beam.

Yasuhiro Takaya, Terutake Hayashi, Masaki Michihata, 2009, Applied optics.

Dimensional measurement of microform with high aspect ratio using an optically controlled particle with standing wave scale sensing

Yasuhiro Takaya, Terutake Hayashi, Masaki Michihata, 2012 .

Chemical mechanical polishing of patterned copper wafer surface using water-soluble fullerenol slurry

Yasuhiro Takaya, Terutake Hayashi, Masaki Michihata, 2011 .

In-Process Measurement Method for Detection and Discrimination of Silicon Wafer Surface Defects by Laser Scattered Defect Pattern

Takashi Miyoshi, Yasuhiro Takaya, Katsumasa Saito, 1998 .

Fundamental Analysis on the Novel 3-D Probing Technique for Micro-parts Using the Optical Fiber Trapping

Takashi Miyoshi, Yasuhiro Takaya, Takaki Hashimoto, 2003 .

B-Spline Curve Fitting onto Measured Point Data under Consideration of Curvature.

Takashi Miyoshi, Yasuhiro Takaya, Takayuki Gotoh, 1994 .

High Sensitivity Optical Detection of Oriented Microdefects on Silicon Wafer Surfaces Using Annular Illumination

Takashi Miyoshi, Yasuhiro Takaya, Shoichi Shimada, 2001 .

Nanometer measurement of silicon wafer surface texture based on Fraunhofer diffraction pattern

Takashi Miyoshi, Yasuhiro Takaya, Katsumasa Saito, 1995 .

Nano-Position Sensing Using Optically Motion-controlled Microprobe with PSD Based on Laser Trapping Technique

Takashi Miyoshi, Yasuhiro Takaya, Shuichi Dejima, 2005 .

Measurement of a tool wear profile using confocal fluorescence microscopy of the cutting fluid layer

Yasuhiro Takaya, Masaki Michihata, Yasuhiro Mizutani, 2016 .

Development of The Nano-CMM Probe based on Laser Trapping Technology

Takashi Miyoshi, Yasuhiro Takaya, Katsumasa Saito, 1999 .

Development of Optical Ring Image Sensor for 3D Profile Measurement of Machined Metal Surface. Light Scattering Simulation of Metal Surface and Its Verification.

Takashi Miyoshi, Yasuhiro Takaya, Satoru Takahashi, 1999 .

Performance of water-soluble fullerenol as novel functional molecular abrasive grain for polishing nanosurfaces

Yasuhiro Takaya, Terutake Hayashi, Keisuke Suzuki, 2009 .

INTERNAL DEFECT DETECTION IN THE VICINITY OF SI WAFER SURFACE USING EVANESCENT WAVE

Takashi Miyoshi, Yasuhiro Takaya, Ryusuke Nakajima, 2003 .

Sensing a vertical surface by measuring a fluorescence signal using a confocal optical system

Yasuhiro Takaya, Terutake Hayashi, Masaki Michihata, 2014 .

3D Micro-Profile Measurement using Optical Inverse Scattering Phase Method

Atsushi Taguchi, Takashi Miyoshi, Yasuhiro Takaya, 2000 .

Nano position sensing based on laser trapping technique for flat surfaces

Yasuhiro Takaya, Terutake Hayashi, Masaki Michihata, 2008 .

Surface analysis of the chemical polishing process using a fullerenol slurry by Raman spectroscopy under surface plasmon excitation

Yasuhiro Takaya, Terutake Hayashi, Masaki Michihata, 2013 .

Study on the Cogging Torque Reduction Method of the Motors Using a Rotary Lamination Process

Yasuhiro Takaya, Takashi Yoshioka, Yuji Nakahara, 2008 .