Eyup Bagci

发表

Corrigendum to "Reverse engineering applications for recovery of broken or worn parts and re-manufacturing: Three case studies"[Advances in Software Engineering 40/6 (2009) 407-418]

Eyup Bagci, 2011, Adv. Eng. Softw..

3-D numerical analysis of orthogonal cutting process via mesh-free method

Eyup Bagci, E. Bagci, 2011 .

Experimental investigation of effect of tool path strategies and cutting parameters using acoustic signal in complex surface machining

Eyup Bagci, E. Bagci, 2017 .

Reverse engineering applications for recovery of broken or worn parts and re-manufacturing: Three case studies

Eyup Bagci, E. Bagci, 2009, Adv. Eng. Softw..

Erratum to "Reverse engineering applications for recovery of broken or worn parts and re-manufacturing: Three case studies"

Bülent Kaya, Eyup Bagci, Ismail Bican, 2009, Adv. Eng. Softw..

Investigation of surface roughness in turning unidirectional GFRP composites by using RS methodology and ANN

Eyup Bagci, Birhan Işık, B. Işık, 2006 .

Analysis of temperature changes on the twist drill under different drilling conditions based on Taguchi method during dry drilling of Al 7075-T651

Babur Ozcelik, Eyup Bagci, 2005 .

Evaluation of drilled hole quality in Al 2024 alloy

Yusuf Kaynak, Mustafa Kurt, Eyup Bagci, 2008 .

Experimental observation of tool wear, cutting forces and chip morphology in face milling of cobalt based super-alloy with physical vapour deposition coated and uncoated tool

Aykut Kentli, Osman Yazicioglu, Eyup Bagci, 2007 .

Dimensional analyses and surface quality of the laser cutting process for engineering plastics

Yusuf Kaynak, Mustafa Kurt, Eyup Bagci, 2009 .

Finite element and experimental investigation of temperature changes on a twist drill in sequential dry drilling

Babur Ozcelik, Eyup Bagci, B. Ozcelik, 2006 .