J Fisher

发表

Cushion form Bearings for Total Knee Joint Replacement Part 2: Wear and Durability

D D Auger, D Dowson, J Fisher, 1995, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

A microcomputer-based data acquisition system for a prosthetic heart valve test apparatus.

J Fisher, A L Evans, I MacDonald, 1986, Journal of medical engineering & technology.

Cardiac valve replacement: a bioengineering approach.

J Fisher, S A Korossis, E Ingham, 2000, Bio-medical materials and engineering.

Contact Pressure Prediction in Total Knee Joint Replacements Part 2: Application to the Design of Total Knee Joint replacements

D D Auger, D Dowson, J Fisher, 1995, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

A universal air-bubble detector for infusion pumps.

J Fisher, J A O'Donoghue, J. O'Donoghue, 1984, Journal of medical engineering & technology.

Calibration of some instruments for measuring peak expiratory flow.

A Shaw, J Fisher, J. Fisher, 1980, Journal of medical engineering & technology.

Falls from hospital beds as a result of poor mattress design: a case history.

A Shaw, J Fisher, 1979, Journal of medical engineering & technology.

A hip joint simulator study using simplified loading and motion cycles generating physiological wear paths and rates

J Fisher, P S Barbour, M H Stone, 1999, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Hydrodynamic Function of Second Generation Porcine Bioprosthetic Heart Valves

J Fisher, M Butterfield, J. Fisher, 1991, Journal of cardiac surgery.

Investigation of the friction and surface degradation of innovative chondroplasty materials against articular cartilage

J Fisher, J. Fisher, E Northwood, 2007, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Analysis of retrieved alumina ceramic components from Mittelmeier total hip prostheses.

J Fisher, E Ingham, J. Fisher, 1999, Biomaterials.

Influence of the meniscus on friction and degradation of cartilage in the natural knee joint.

J Fisher, E Ingham, Z. Jin, 2009, Osteoarthritis and cartilage.

Wear and biological activity of highly crosslinked polyethylene in the hip under low serum protein concentrations

J Fisher, E Ingham, M H Stone, 2007, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Wear simulation of ultra-high molecular weight polyethylene hip implants by incorporating the effects of cross-shear and contact pressure

J Fisher, T D Brown, T. Brown, 2008, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Influence of the extracellular matrix on the frictional properties of tissue-engineered cartilage.

J Fisher, Z. Jin, J. Fisher, 2007, Biochemical Society transactions.

In vitro biomechanical and hydrodynamic characterisation of decellularised human pulmonary and aortic roots.

J Fisher, E Ingham, J. Fisher, 2018, Journal of the mechanical behavior of biomedical materials.

Quantitative comparison of wear debris from UHMWPE that has and has not been sterilised by gamma irradiation.

J Fisher, E Ingham, B M Wroblewski, 1998, The Journal of bone and joint surgery. British volume.

Comparative study of the hydrodynamic function of six size 19 mm bileaflet heart valves.

J Fisher, J. Fisher, 1995, European journal of cardio-thoracic surgery : official journal of the European Association for Cardio-thoracic Surgery.

Lubrication and friction prediction in metal-on-metal hip implants

J Fisher, Z. Jin, J. Fisher, 2008, Physics in medicine and biology.

Tribology of Total Artificial Joints

D Dowson, J Fisher, D. Dowson, 1991, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Frame-mounted porcine valve bioprostheses: preparation during aortic-root dilation. Biomechanics and design considerations.

J Fisher, M Butterfield, J. Fisher, 1993, The Journal of thoracic and cardiovascular surgery.

A new design for polyurethane heart valves.

J Fisher, M Butterfield, D J Wheatley, 2001, The Journal of heart valve disease.

Comparison of the cytotoxicity of clinically relevant cobalt-chromium and alumina ceramic wear particles in vitro.

J Fisher, E Ingham, M H Stone, 2003, Biomaterials.

Hydrodynamic Function of a Biostable Polyurethane Flexible Heart Valve after Six Months in Sheep

J Fisher, D J Wheatley, G M Bernacca, 2001, The International journal of artificial organs.

A synthetic leaflet heart valve with improved opening characteristics.

J Fisher, M E Leat, J. Fisher, 1994, Medical engineering & physics.

Analysis and modelling of wear of cobalt-chrome alloys in a pin-on-plate test for a metal-on-metal total hip replacement

J Fisher, Z M Jin, P Firkins, 2000, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Influence of hyaluronic acid on the time-dependent friction response of articular cartilage under different conditions

J Fisher, E Ingham, C. J. Bell, 2006, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Effect of microseparation on contact mechanics in ceramic-on-ceramic hip joint replacements

J Fisher, Z. Jin, J. Fisher, 2002, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Wear of fixed bearing and rotating platform mobile bearing knees subjected to high levels of internal and external tibial rotation

D D Auger, J Fisher, A A Goldsmith, 2001, Journal of materials science. Materials in medicine.

Comparative study of the hydrodynamic function of the CarboMedics valve.

J Fisher, M Butterfield, J. Fisher, 1991, The Annals of thoracic surgery.

Understanding the differences between the wear of metal-on-metal and ceramic-on-metal total hip replacements

J Fisher, A. Neville, J. Fisher, 2008, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Development of computational wear simulation of metal-on-metal hip resurfacing replacements.

J Fisher, Z. Jin, J. Fisher, 2008, Journal of biomechanics.

Wear of surface engineered metal-on-metal hip prostheses

J Fisher, E Ingham, M H Stone, 2004, Journal of materials science. Materials in medicine.

Wear and Creep of Highly Crosslinked Polyethylene against Cobalt Chrome and Ceramic Femoral Heads

J Fisher, E Ingham, J. Fisher, 2008, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Prediction of plastic strains in ultra-high molecular weight polyethylene due to microscopic asperity interactions during sliding wear

J Fisher, D C Barton, M H Stone, 1998, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

A hip joint simulator study using new and physiologically scratched femoral heads with ultra-high molecular weight polyethylene acetabular cups

J Fisher, P S Barbour, M H Stone, 2000, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Carbon–carbon composite bearing materials in hip arthroplasty: analysis of wear and biological response to wear debris

J Fisher, E Ingham, H Sakoda, 2004, Journal of materials science. Materials in medicine.

A study of the wear resistance of three types of clinically applied UHMWPE for total replacement hip prostheses.

J Fisher, P S Barbour, M H Stone, 1999, Biomaterials.

Quantitative analysis of wear and wear debris from metal-on-metal hip prostheses tested in a physiological hip joint simulator.

J Fisher, E Ingham, M H Stone, 2001, Bio-medical materials and engineering.

A two-dimensional model of cyclic strain accumulation in ultra-high molecular weight polyethylene knee replacements

J Fisher, E A Reeves, E. A. Reeves, 1998, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

In Vitro Determination of the Curvatures and Bending Strains Acting on the Leaflets of Polyurethane Trileaflet Heart Valves During Leaflet Motion

J Fisher, T David, J. Fisher, 1995, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Wear of ultra-high molecular weight polyethylene acetabular cups in a physiological hip joint simulator in the anatomical position using bovine serum as a lubricant

J Fisher, C S Hardaker, J. Fisher, 1997, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Design of a function test apparatus for prosthetic heart valves. Initial results in the mitral position.

J Fisher, D J Wheatley, J. Fisher, 1986, Clinical physics and physiological measurement : an official journal of the Hospital Physicists' Association, Deutsche Gesellschaft fur Medizinische Physik and the European Federation of Organisations for Medical Physics.

The effect of sizing on the in vitro hydrodynamic characteristics and leaflet motion of the Toronto SPV stentless valve.

J Fisher, P G Walker, P. Walker, 1999, The Journal of thoracic and cardiovascular surgery.

Alumina-alumina artificial hip joints. Part II: characterisation of the wear debris from in vitro hip joint simulations.

J Fisher, E Ingham, J. Fisher, 2002, Biomaterials.

Effects of clinically relevant alumina ceramic wear particles on TNF-alpha production by human peripheral blood mononuclear phagocytes.

J Fisher, E Ingham, J. Fisher, 2003, Biomaterials.

Hydrodynamic function of ten prosthetic heart valves in the aortic position.

J Fisher, D J Wheatley, J. Fisher, 1988, Clinical physics and physiological measurement : an official journal of the Hospital Physicists' Association, Deutsche Gesellschaft fur Medizinische Physik and the European Federation of Organisations for Medical Physics.

A simple fully integrated contact-coupled wear prediction for ultra-high molecular weight polyethylene hip implants

J Fisher, Z. Jin, J. Fisher, 2006, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Ultra-High Molecular Weight Polyethylene Wear Debris Generated in Vivo and in Laboratory Tests; the Influence of Counterface Roughness

J Fisher, E Ingham, B M Wroblewski, 1996, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Comparative study of the function of the Abiomed polyurethane heart valve for use in left ventricular assist devices.

J Fisher, M E Leat, J. Fisher, 1993, Journal of biomedical engineering.

The Influence of Loading Time and Lubricant on the Friction of Articular Cartilage

J Fisher, J. Fisher, H. Forster, 1996, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Microscopic asperity contact and deformation of ultrahigh molecular weight polyethylene bearing surfaces

J Fisher, Z. Jin, J. Fisher, 2003, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

An initial investigation into the wear and damage within the pivots of three types of bileaflet mechanical heart valves.

J Fisher, M J King, C L Olin, 1996, The Journal of heart valve disease.

Long-term wear of HIPed alumina on alumina bearings for THR under microseparation conditions

J Fisher, E Ingham, J. Fisher, 2001, Journal of materials science. Materials in medicine.

Microseparation of the centers of alumina-alumina artificial hip joints during simulator testing produces clinically relevant wear rates and patterns.

J Fisher, E Ingham, J. Fisher, 2000, The Journal of arthroplasty.

Alumina-alumina artificial hip joints. Part I: a histological analysis and characterisation of wear debris by laser capture microdissection of tissues retrieved at revision.

J Fisher, E Ingham, J. Fisher, 2002, Biomaterials.

Polyethylene particles of a 'critical size' are necessary for the induction of cytokines by macrophages in vitro.

J Fisher, E Ingham, B M Wroblewski, 1998, Biomaterials.

Frictional behaviour of bovine articular cartilage.

J Fisher, E Ingham, Z M Jin, 2000, Biorheology.

Laboratory assessment of the design, function, and durability of pericardial bioprostheses.

J Fisher, D J Wheatley, G R Jack, 1987, Engineering in medicine.

Quantification of third-body damage and its effect on UHMWPE wear with different types of femoral head.

J Fisher, E Ingham, B M Wroblewski, 1998, The Journal of bone and joint surgery. British volume.

An investigation of the effect of conformity of knee hemiarthroplasty designs on contact stress, friction and degeneration of articular cartilage: a tribological study.

J Fisher, E Ingham, Z. Jin, 2009, Journal of biomechanics.

The influence of acetabular cup angle on the wear of “BIOLOX Forte” alumina ceramic bearing couples in a hip joint simulator

J Fisher, E Ingham, J. Fisher, 2001, Journal of materials science. Materials in medicine.

Investigation into the effect of proteoglycan molecules on the tribological properties of cartilage joint tissues

J Fisher, E Ingham, J. Fisher, 1998, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

A novel low wearing differential hardness, ceramic-on-metal hip joint prosthesis.

J Fisher, E Ingham, M H Stone, 2001, Journal of biomechanics.

Bioengineering reasons for the failure of metal-on-metal hip prostheses: an engineer's perspective.

J Fisher, J. Fisher, John Fisher, 2011, The Journal of bone and joint surgery. British volume.

Comparative Analysis of Bone Stresses and Strains in the Intoss dental Implant with and without a Flexible Internal Post

J Fisher, S E Clift, J. Fisher, 1995, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Biomechanics of glutaraldehyde-treated porcine aortic roots and valves. An investigation of the effect of predilation of the elastic aortic root.

J Fisher, J. Fisher, K. Watterson, 1994, The Journal of thoracic and cardiovascular surgery.

The influence of free hand suturing technique and zero pressure fixation on the hydrodynamic function of aortic root and aortic valve leaflets.

J Fisher, K G Watterson, P Revanna, 1997, European journal of cardio-thoracic surgery : official journal of the European Association for Cardio-thoracic Surgery.

A method for shape optimization of a hip prosthesis to maximize the fatigue life of the cement.

J Fisher, D C Barton, J. Fisher, 1996, Medical engineering & physics.

Primary tissue failure in pericardial heart valves.

J Fisher, D J Wheatley, J. Fisher, 1987, The Journal of thoracic and cardiovascular surgery.

Tribology in joint replacement

J Fisher, Z. Jin, J. Fisher, 2021, Joint Replacement Technology.

Anisotropic elasticity and strength of glutaraldehyde fixed bovine pericardium for use in pericardial bioprosthetic valves.

J Fisher, J C Barbenel, P Zioupos, 1994, Journal of biomedical materials research.

The influence of sizing and method of fixation on the hydrodynamic function of stentless, free-hand inserted porcine bioprosthesis: an in vitro study.

J Fisher, K G Watterson, P Revanna, 1997, The Journal of heart valve disease.

The effect of glycosaminoglycan depletion on the friction and deformation of articular cartilage

J Fisher, E Ingham, Z. Jin, 2008, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

In vitro evaluation of six mechanical and six bioprosthetic valves.

J Fisher, D J Wheatley, J. Fisher, 1986, The Thoracic and cardiovascular surgeon.

The effect of sizing on the hydrodynamic parameters of the Medtronic freestyle valve in vitro.

J Fisher, P G Walker, P. Walker, 2000, The Annals of thoracic surgery.

Porcine bioprosthetic valves prepared with permanent pre-dilation of the aortic root: a review.

J Fisher, 1995, The Journal of heart valve disease.

Geometry of homograft valve leaflets: effect of dilation of the aorta and the aortic root.

J Fisher, M Butterfield, J. Fisher, 1993, The Annals of thoracic surgery.

Determination of the Curvatures and Bending Strains in Open Trileaflet Heart Valves

J Fisher, T David, J. Fisher, 1995, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Wear and deformation of ceramic-on-polyethylene total hip replacements with joint laxity and swing phase microseparation

J Fisher, M Butterfield, E Ingham, 2003, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

The hydrodynamic function and leaflet dynamics of aortic and pulmonary roots and valves: an in vitro study.

J Fisher, M Butterfield, J. Fisher, 1992, European journal of cardio-thoracic surgery : official journal of the European Association for Cardio-thoracic Surgery.

The effect of nano- and micron-sized particles of cobalt-chromium alloy on human fibroblasts in vitro.

J Fisher, E Ingham, J. Fisher, 2007, Biomaterials.

The Role of the Surface Amorphous Layer of Articular Cartilage in Joint Lubrication

J Fisher, E Ingham, Z. Jin, 2006, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Finite Element Stress Analysis of a New Design of Synthetic Leaflet Heart Valve

J Fisher, S E Clift, J. Fisher, 1996, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Wear of ultra-high molecular weight polyethylene against damaged and undamaged stainless steel and diamond-like carbon-coated counterfaces

J Fisher, R Butter, J. Fisher, 1998, Journal of materials science. Materials in medicine.

A Model of the Geometrical Changes in Aortic Valve Leaflets in Response to Leaflet Extension and Variable Boundary Conditions

J Fisher, M Butterfield, J. Fisher, 1992, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Distribution of hepatic venous blood in the total cavo-pulmonary connection: an in vitro study.

J Fisher, P G Walker, P. Walker, 2000, European journal of cardio-thoracic surgery : official journal of the European Association for Cardio-thoracic Surgery.

A New Formulation for the Prediction of Polyethylene Wear in Artificial Hip Joints

J Fisher, Z. Jin, J. Fisher, 2011, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Investigation into the effects of proteins and lipids on the frictional properties of articular cartilage.

J Fisher, E Ingham, J. Fisher, 1998, Biomaterials.

Leaflet geometry and function in porcine bioprostheses.

J Fisher, M Butterfield, J. Fisher, 1991, European journal of cardio-thoracic surgery : official journal of the European Association for Cardio-thoracic Surgery.

The influence of continuous sliding and subsequent surface wear on the friction of articular cartilage

J Fisher, J. Fisher, H. Forster, 1999, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

A three-dimensional, time-dependent analysis of flow through a bileaflet mechanical heart valve: comparison of experimental and numerical results.

J Fisher, T David, J. Fisher, 1996, Journal of biomechanics.

Determination of Contact Area in ‘cushion Form’ Bearings for Artificial Hip Joints

D Dowson, J Fisher, B Jobbins, 1990, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Biological effects of clinically relevant wear particles from metal-on-metal hip prostheses

J Fisher, E Ingham, J. Fisher, 2006, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Three-dimensional study of the effect of two leaflet opening angles on the time-dependent flow through a bileaflet mechanical heart valve.

J Fisher, T David, M J King, 1997, Medical engineering & physics.