Joseba Mendiguren

发表

Bending behaviour and oil canning in roll forming a steel channel

Matthias Weiss, Buddhika Abeyrathna, Desinghe Shiromani Gangoda, 2017 .

Roll levelling semi-analytical model for process optimization

Joseba Mendiguren, Elena Silvestre, D. Garcia, 2016 .

Numerical simulation of the roll levelling of dp1000 steel using a nonlinear combined hardening material model

Joseba Mendiguren, Elena Silvestre, Lander Galdos, 2015 .

On the plastic flow rule formulation in anisotropic yielding aluminium alloys

Joseba Mendiguren, Lander Galdos, Eneko Saenz de Argandoña, 2018, The International Journal of Advanced Manufacturing Technology.

Cost efficiency of the non-associative flow rule simulation of an industrial component

Joseba Mendiguren, Lander Galdos, Eneko Sáenz de Argandoña, 2017 .

Numerical simulation of the roll levelling of third generation fortiform 1050 steel using a nonlinear combined hardening material model

Joseba Mendiguren, Elena Silvestre, Lander Galdos, 2017 .

Energy Efficient Servo Controlled Roll Levelling Machines

Joseba Mendiguren, Elena Silvestre, Lander Galdos, 2016 .

Simulation of springback and microstructural analysis of dual phase steels

Xing Wei, Joseba Mendiguren, Bernard Rolfe, 2013 .

Experimental characterization of the heat transfer coefficient under different close loop controlled pressures and die temperatures

Joseba Mendiguren, Lander Galdos, Eneko Sáenz de Argandoña, 2016 .

An analytical approach to predict web-warping and longitudinal strain in flexible roll formed sections of variable width

Joseba Mendiguren, Bernard Rolfe, Matthias Weiss, 2015 .

Investigation of influencing factors on friction during ring test in hot forging using FEM simulation

Joseba Mendiguren, Lander Galdos, Eneko Sáenz de Argandoña, 2016 .

Friction characterisation in levelling processes

Joseba Mendiguren, Elena Silvestre, Lander Galdos, 2016 .

An analytical model for web-warping in variable width flexible roll forming

Joseba Mendiguren, Bernard Rolfe, Matthias Weiss, 2016 .

Numerical simulation of U-Drawing test of Fortiform 1050 steel using different material models

Joseba Mendiguren, Lander Galdos, Eneko Sáenz de Argandoña, 2017 .

The effect of tooling design parameters on web-warping in the flexible roll forming of UHSS

Joseba Mendiguren, Lander Galdos, Bernard Rolfe, 2013 .

New drawbead tester and numerical analysis of drawbead closure force

Joseba Mendiguren, Lander Galdos, Eneko Saenz de Argandoña, 2021, The International Journal of Advanced Manufacturing Technology.

A generalised fractional derivative model to represent elastoplastic behaviour of metals

Joseba Mendiguren, Lander Galdos, Fernando Cortés, 2012 .

Improvement of accuracy in a free bending test for material characterization

Joseba Mendiguren, Bernard Rolfe, Matthias Weiss, 2015 .

Influence of the pressure dependent coefficient of friction on deep drawing springback predictions

Joseba Mendiguren, Lander Galdos, Eneko Sáenz de Argandoña, 2016 .

Press hardening of alternative high strength aluminium and ultra-high strength steels

Joseba Mendiguren, Lander Galdos, Eneko Sáenz de Argandoña, 2016 .

Testing and Modeling of Roll Levelling Process

Joseba Mendiguren, Elena Silvestre, Lander Galdos, 2014 .

The effect of process parameters on web-warping in the flexible roll forming of UHSS

Joseba Mendiguren, Lander Galdos, Bernard Rolfe, 2013 .

Influence of Material and Tribological Modelling on the Prediction of Big Size Automotive Components Springback

Joseba Mendiguren, Lander Galdos, Eneko Sáenz de Argandoña, 2016 .

An extended elastic law to represent non-linear elastic behaviour: Application in computational metal forming

Joseba Mendiguren, Lander Galdos, Juan J. Trujillo, 2013 .