Shigeki Matsumura

发表

Estimating Gear Tooth Surface Geometry by Means of the Vibration Measurement: Distinction of the Vibration Characteristics of Gears With Tooth Surface Form Error

Chanat Ratanasumawong, Shigeki Matsumura, Tetsuo Tatsuno, 2009 .

A Trial of Shooting Oil Droplets in Air for the Purpose of Simulating Jet Oil Lubrication to Gear Mesh

Shigeki Matsumura, Haruo Houjoh, Shun-ichi Ohshima, 2013 .

1202 自己ポンプ作用を利用した歯車装置の風損低減 : 減圧効果の把握(歯車の動力損失・振動・伝達誤差,一般講演)

Kai Feng, Shigeki Matsumura, Haruo Houjoh, 2012 .

Vibration Behavior of a Helical Gear Pair under Light Load Condition : Experimental Verification of Meshing Properties

Shigeki Matsumura, Haruo Houjoh, 2002 .

Estimation of loaded static transmission error of helical gears by vibration measurement under operating load conditions

Shigeki Matsumura, Haruo Houjoh, Toshiya Nagumo, 2016 .

Consideration of trigger signal of revolution for sophisticated gear

Shigeki Matsumura, Haruo Houjoh, Toshiya Nagumo, 2016 .

Estimation of Sliding Loss in a Parallel-Axis Gear Pair

Chanat Ratanasumawong, Shigeki Matsumura, Haruo Houjoh, 2012 .

Study of a method for evaluating stone chipping resistance of vehicle paint films

Shigeki Matsumura, Osamu Kaji, 1994 .

Experimental Investigation of the Possibility of a Self-Vacuuming Gearbox for Reducing Windage Loss

Shigeki Matsumura, Haruo Houjoh, Takeshi Iino, 2015 .

Utilization of Synchronous Averaging of Vibration for Diagnosis of Gear System to Estimate Tooth Error

Chanat Ratanasumawong, Shigeki Matsumura, Haruo Houjoh, 2003 .

Investigation on Modulation Sidebands in a K-H-V Planetary Gear with Double-Enveloping Cycloid Drive Vibration

Shigeki Matsumura, Haruo Houjoh, Bing Kui Chen, 2011 .

GDN-02 DYNAMIC CHARACTERIZATION OF ASYMMETRICAL SIDEBANDS OF MESH FREQUENCY(DYNAMICS AND NOISE PROBLEMS OF GEARS AND GEAR BOXES)

Chanat Ratanasumawong, Shigeki Matsumura, Haruo Houjoh, 2009 .

Research on natural characteristics of double-helical star gearing system for GTF aero-engine

Shigeki Matsumura, Haruo Houjoh, Mo Shuai, 2016 .

An Alternative Method for Evaluating Gear Tooth Surface Geometry Based on Synchronous Average of Vibration of a Gear Pair

Chanat Ratanasumawong, Shigeki Matsumura, Haruo Houjoh, 2007 .

Extraction of Vibrational Characteristics of a Helical Gear due to Tooth Surface Deviation by the Use of Synchronous Averaging

Chanat Ratanasumawong, Shigeki Matsumura, Haruo Houjoh, 2003 .

Pressure Measurement of Ambient Air in the Root Space of Helical Gears for the Purpose of Understanding Fluid Flow to Improve Lubrication Efficiency

Shigeki Matsumura, Shun-ichi Ohshima, Haruo Houjoh, 2003 .

Experimental Investigation of the Effect of Gear Ratio on the Dynamic Behavior of a Helical Gear Pair.

Shaofeng Wang, Kiyohiko Umezawa, Shigeki Matsumura, 1996 .

Calculation of the behavior of oil churning and its loss in a gear box by a moving particle method—the first result of both calculation and experiment

Shigeki Matsumura, Haruo Houjoh, Takeshi Iino, 2016 .

S1160203 Evaluation of Loss and Heat Generation Associated with Pressure Decrease in a Gearbox Caused by Self-pumping of Gear Pair

Shigeki Matsumura, Haruo Houjoh, Takeshi Iino, 2014 .

Dynamic Behavior of Helical Gears with Effects of Shaft and Bearing Flexibilities

Kai Feng, Shigeki Matsumura, Haruo Houjoh, 2011 .

Experimental Study of the Lubricant Flow around the Mesh-Ending Region Simulated in Water Using a Helical Gear Pair

Shigeki Matsumura, Haruo Houjoh, Shun-ichi Ohshima, 2012 .

1209 Classification of Waveform of Gear Vibration for Evaluating Tooth Surface Geometry : A Polar Plot Representation Extracted from Synchronous Averaged Signal

Chanat Ratanasumawong, Shigeki Matsumura, Tetsuo Tatsuno, 2006 .

Estimation of Mesh Excitation Waveform Combining Vibration Measurement and Simulation

Shigeki Matsumura, Haruo Houjoh, 2013 .

Rotational Vibration of a Spur Gear Pair Having Tooth Helix Deviation: Effect of Lead Modifications

Taichi Sato, Shigeki Matsumura, Haruo Houjoh, 2003 .

616 Design of an active suspension system for one wheel model using sliding mode controller with VSS observer

Toshio Yoshimura, Masao Kurimoto, Junichi Hino, 2000 .

Research on Active Vibration Suppression of a Gear System : 2DOF Drive System

Shigeki Matsumura, Haruo Houjoh, Hiroaki Miyase, 2003 .

ESTIMATION OF LOADED STATIC TRANSMISSION ERROR OF HELICAL GEARS BY VIBRATION MEASUREMENT UNDER OPERATING CONDITIONS

Shigeki Matsumura, Haruo Houjoh, Toshiya Nagumo, 2017 .

Design of a Novel Cycloid Drive with a Cycloid-arc Gear and Analysis of Its Meshing Characteristic

Bingkui Chen, Shigeki Matsumura, Haruo Houjoh, 2012 .

GDN-25 ESTIMATION OF DAMPING COEFFICIENTS ON A POWER TRANSMISSION SYSTEM USING MODAL ANALYSIS(GEAR DYNAMICS AND NOISE)

Shigeki Matsumura, Haruo Houjoh, Yoshihiro Satou, 2001 .

121 はすば歯車のかみ合い部における媒質流体の運動挙動の実験的把握 : 水を媒質とした観察結果に基づく3次元挙動(OS07 歯車の潤滑/OS14-1 応用・実用事例I)

Shigeki Matsumura, Haruo Houjoh, Shun-ichi Ohshima, 2007 .

Torsional Stiffness Calculation of Double-Enveloping Cycloid Drive

Bingkui Chen, Shigeki Matsumura, Haruo Houjoh, 2012 .

A discussion on feeding cooler lubricant to the mesh exit region of a helical gear pair based on flow visualization experiments

Shigeki Matsumura, Haruo Houjoh, Shun-ichi Ohshima, 2014 .

Generation Mechanism of Sidebands about Gear Mesh Vibration Considering Amplitudes Asymmetricity

Chanat Ratanasumawong, Shigeki Matsumura, Haruo Houjoh, 2011 .

Rotational Vibration of a Spur Gear Pair Considering Tooth Helix Deviation : Development of Simulator and Verification

Taichi Sato, Kiyohiko Umezawa, Shigeki Matsumura, 2000 .

Extraction of Vibration Characteristics of an Individual Gear : Utilization of Synchronous Averaging Method and Shaft Order Analysis

Chanat Ratanasumawong, Shigeki Matsumura, Haruo Houjoh, 2004 .

Characteristics ofSemi-Conducting Glaze Insulators

Shigeki Matsumura, Kenji Sakanishi, 2005 .

Inspection of Tooth Surface Geometry by Means of Vibration Measurement

Chanat Ratanasumawong, Shigeki Matsumura, Haruo Houjoh, 2005 .

Effect of Variations in Tooth Flank Form Among Teeth on Gear Vibration and an Sensory Evaluation Method Using Potential Gear Noise

Masaharu Komori, Aizoh Kubo, Chanat Ratanasumawong, 2010 .

Detection of Tooth Surface Form Irregularity by Means of Vibration Measurement.

Kiyohiko Umezawa, Shigeki Matsumura, Haruo Houjoh, 1999 .

Tooth Contact Analysis and Manufacture on Multitasking Machine of Large-Sized Straight Bevel Gears With Equi-Depth Teeth

Kazumasa Kawasaki, Shigeki Matsumura, Haruo Houjoh, 2013 .

Load sharing behavior analysis method of wind turbine gearbox in consideration of multiple-errors

Shigeki Matsumura, Haruo Houjoh, Qiong Wu, 2016 .

Estimation Method of Mesh Excitation Waveform of a Gear System (Hybrid Estimation With Vibration Measurement and Simulation)

Shigeki Matsumura, Haruo Houjoh, Nagumo Toshiya, 2011 .

2202 Applying Centrifugal Pendulum Vibration Absorber Isochronous even under Large Amplitude Condition to Gear System

Shigeki Matsumura, Haruo Houjoh, Naoto Tachikawa, 2008 .

Vibration diagnosis method of multistage gearing to point out ghost noise source with amplitude fluctuation analysis

Shigeki Matsumura, Haruo Houjoh, 2015 .

GDN-15 PREDICTION OF GHOST NOISE OCCURRENCE ON GROUND HELICAL GEARS WITH DETAILED SURFACE MEASUREMENT(GEAR DYNAMICS AND NOISE)

Shigeki Matsumura, Haruo Houjoh, Atsushi Kitahara, 2001 .

S111011 Estimation of Excitation from Gear Vibration Combining Vibration Measurement and Simulation : Verification with Ribbed Thin Wall Gear Box

Shigeki Matsumura, Haruo Houjoh, 2011 .

An Investigation to Realize Low Vibration Helical Gearing. (Experimental Interpretation of Detailed Dynamic Behavior).

Shaofeng Wang, Kiyohiko Umezawa, Shigeki Matsumura, 1995 .

1218 Visualization of the Medium Flow of the Mesh Area using a Pair of Transparent Acrylic Helical Gears

Shigeki Matsumura, Haruo Houjoh, Shun-ichi Ohshima, 2006 .

Rotational Vibration of a Helical Gear Pair Having Tooth Surface Deviation during Transmission of Light Load

Kiyohiko Umezawa, Shigeki Matsumura, Haruo Houjoh, 1996 .

Evaluation of Tooth Surface Geometry from Synchronous Averaged Signal of Gear Vibration Using Frequency Response Function

Chanat Ratanasumawong, Shigeki Matsumura, Haruo Houjoh, 2004 .

Utilization of Synchronous Averaging for Inspection of Tooth Surface Undulations on Gears (Localization of Nonmesh Harmonic Components to Individual Gear)

Chanat Ratanasumawong, Shigeki Matsumura, Haruo Houjoh, 2007 .

205 Evaluation of Gear Tooth Surface Geometry with Vibration Measurement Results : Phase Calibration to Estimate Gear Excitation Force

Shigeki Matsumura, Haruo Houjoh, Ratanasumawong Chanat, 2007 .