Lander Galdos

发表

Roll levelling semi-analytical model for process optimization

Joseba Mendiguren, Elena Silvestre, D. Garcia, 2016 .

Numerical simulation of the roll levelling of dp1000 steel using a nonlinear combined hardening material model

Joseba Mendiguren, Elena Silvestre, Lander Galdos, 2015 .

On the plastic flow rule formulation in anisotropic yielding aluminium alloys

Joseba Mendiguren, Lander Galdos, Eneko Saenz de Argandoña, 2018, The International Journal of Advanced Manufacturing Technology.

Integral Design and Manufacturing Methodology of a Reduced-Scale Servo Press

Aitzol Iturrospe, Lander Galdos, Jon Olaizola, 2020 .

Cost efficiency of the non-associative flow rule simulation of an industrial component

Joseba Mendiguren, Lander Galdos, Eneko Sáenz de Argandoña, 2017 .

Numerical simulation of the roll levelling of third generation fortiform 1050 steel using a nonlinear combined hardening material model

Joseba Mendiguren, Elena Silvestre, Lander Galdos, 2017 .

Instalación piloto de hydroforming para prototipado de piezas industriales: ejemplo de hidroconformado de un pedal de freno

Lander Galdos, J. A. Esnaola, A. Aginagalde, 2008 .

Energy Efficient Servo Controlled Roll Levelling Machines

Joseba Mendiguren, Elena Silvestre, Lander Galdos, 2016 .

Using the solid-shell element to model the roll forming of large radii profiles

Jon Larrañaga, Lander Galdos, Akbar Abvabi, 2012 .

New concept for the manufacturing of an industrial car brake. Process development and performance study

Lander Galdos, J. A. Esnaola, A. Aginagalde, 2008 .

Experimental characterization of the heat transfer coefficient under different close loop controlled pressures and die temperatures

Joseba Mendiguren, Lander Galdos, Eneko Sáenz de Argandoña, 2016 .

Optimization of Geometrical Accuracy of an Industrial Shape in Single Point Incremental Forming

Lander Galdos, N. Otegi, A. Sukia, 2008 .

Investigation of influencing factors on friction during ring test in hot forging using FEM simulation

Joseba Mendiguren, Lander Galdos, Eneko Sáenz de Argandoña, 2016 .

Monitoring of a Hammer Forging Testing Machine for High-Speed Material Characterization

Lander Galdos, Julen Agirre, Nagore Otegi, 2020 .

MATERIAL STRAIN PATH EVOLUTION RECORDING AND FLD OBTENTION VIA STEREOVISION TECHNIQUES IN WARM HYDRAULIC BULGE TEST WITH WINDOW CAMERA PROTECTION

Lander Galdos, A. Izagirre, A. Aginagalde, 2008 .

Friction characterisation in levelling processes

Joseba Mendiguren, Elena Silvestre, Lander Galdos, 2016 .

Flexible roll forming process reliability and optimisation methods

Jon Larrañaga, Lander Galdos, Rafael Ortubay, 2008 .

Numerical simulation of U-Drawing test of Fortiform 1050 steel using different material models

Joseba Mendiguren, Lander Galdos, Eneko Sáenz de Argandoña, 2017 .

Enhancement of Incremental Sheet Metal Forming Technology by Means of Stretch Forming

Lander Galdos, N. Otegi, Fernando Rastellini, 2011 .

The effect of tooling design parameters on web-warping in the flexible roll forming of UHSS

Joseba Mendiguren, Lander Galdos, Bernard Rolfe, 2013 .

New drawbead tester and numerical analysis of drawbead closure force

Joseba Mendiguren, Lander Galdos, Eneko Saenz de Argandoña, 2021, The International Journal of Advanced Manufacturing Technology.

The Calibration of High Energy-Rate Impact Forging Hammers by the Copper-Column Upsetting Method and High Speed Camera Measurements

Lander Galdos, Eneko Sáenz de Argandoña, Nuria Herrero, 2014 .

A generalised fractional derivative model to represent elastoplastic behaviour of metals

Joseba Mendiguren, Lander Galdos, Fernando Cortés, 2012 .

Influence of the pressure dependent coefficient of friction on deep drawing springback predictions

Joseba Mendiguren, Lander Galdos, Eneko Sáenz de Argandoña, 2016 .

Press hardening of alternative high strength aluminium and ultra-high strength steels

Joseba Mendiguren, Lander Galdos, Eneko Sáenz de Argandoña, 2016 .

Geometrical accuracy improvement in flexible roll forming lines

Jon Larrañaga, Lander Galdos, S. Berner, 2011 .

Testing and Modeling of Roll Levelling Process

Joseba Mendiguren, Elena Silvestre, Lander Galdos, 2014 .

On the Bauschinger effect in dual phase steel at high levels of strain

Lander Galdos, Peter Hodgson, Matthias Weiss, 2015 .

Warm Incremental Forming of Magnesium Alloys Using Hot Fluid as Heating Media

Ibai Ulacia, Lander Galdos, Eneko Sáenz de Argandoña, 2012 .

The effect of process parameters on web-warping in the flexible roll forming of UHSS

Joseba Mendiguren, Lander Galdos, Bernard Rolfe, 2013 .

Influence of Material and Tribological Modelling on the Prediction of Big Size Automotive Components Springback

Joseba Mendiguren, Lander Galdos, Eneko Sáenz de Argandoña, 2016 .

An extended elastic law to represent non-linear elastic behaviour: Application in computational metal forming

Joseba Mendiguren, Lander Galdos, Juan J. Trujillo, 2013 .