Susumu Kumakura

发表

S1104-1-4 Self-Loosening Performance of Prevailing Torque Type Nuts under Repeated Tensile Loads : on the Thread Calking Type Nuts

Yusuke Sakai, Susumu Kumakura, Kazuhiro Takahashi, 2010 .

Tightening Sequence for Bolted Flange Joint Assembly

Susumu Kumakura, Kumiko Saito, 2003 .

Non-Loosening Performance of Plastically Pre-Deformed Nuts Under Cyclic Loads

Susumu Kumakura, Yasumasa Shoji, Toshiyuki Sawa, 2012 .

325 Initial Bolt Load Reduction of Bolted Flanged Connection

Susumu Kumakura, Atsushi Kusama, 2000 .

Self-Loosening Characteristics of Hexagon Nuts with Flange under Repeated Tensile Loads : FEM Analysis for radial deformations of bolt and nuts

Susumu Kumakura, Daisuke Iwai, Kimiko Saito, 2004 .

S113013 Influence of Lubricants and Lacquer Painting Film on Self-Loosening of Machine Screws : Loosening Characteristic of Truss Head Machine Screw

Susumu Kumakura, Shuji Hosokawa, Ryuuta Edanami, 2013 .

S1104-1-3 On the Bolt Tightening of Bolt Pipe Flange Joint Assembly Using Electric Impact Wrench

Hironao Takahashi, Susumu Kumakura, Yasumasa Shoji, 2010 .

Study of torque, axial tension and bending moment during the screw tightening (1st report) : Relation between torque on fitted portion of threads and axial tension

Susumu Kumakura, Shuji Hosokawa, 1999 .

2725 Relationship between Bolt Tension Performance and Tightening Sequence of Bolted Flange Joints

Susumu Kumakura, Yasumasa Shoji, Hirohiko Hosoya, 2005 .

Optimum Design of Suspensions for Ambulances and Vibration-Isolation Beds : A case of Ambulances Passing over a Combined Speed Hump and Pedestrian Crossing

Susumu Kumakura, Ken'ichi Maemori, Yasuo Watanabe, 2000 .

324 Tightening control of bolted flanged connection

Susumu Kumakura, Atsushi Kusama, Masahiro Ota, 2001 .

S112035 Tightening Coefficient of Bolt Tightening with Electromotive Power Tool : Electric Impact Wrench with Time-Controlled System

Hironao Takahashi, Susumu Kumakura, 2011 .

S112026 Self-locking Performance for the Calking Type Prevailing Torque Nuts : Effect of the Calking Quantity on the Prevailing Torque

Yusuke Sakai, Susumu Kumakura, Taichi Kumada, 2012 .

712 Alternate Optimization between a Combined Speed Control Hump with Pedestrian Crossing and Dampers for Automobile Suspensions

Susumu Kumakura, Takeshi Kojima, Ken'ichi Maemori, 2000 .

Sectional Area for Calculation of Deformation in Screw Thread

Susumu Kumakura, Shuji Hosokawa, Yoshio Umeyama, 1995 .

F-0406 Studies on loosening mechanism of bolt nut Joints in repeated tensile loads. : Effects of tolerance class the engagement of screw threads

Susumu Kumakura, Ken'ichi Maemori, Atsushi Kusama, 2001 .

Experimental Examinations of Tightening Sequence for Bolted Flange Joint assembly

Susumu Kumakura, Kumiko Saitou, 2002 .

The sealing performance of a self-sealing pipe flange connection with anaerobic sealants

Susumu Kumakura, Takashi Kobayashi, 1996 .

Optimum Design for a Combined Speed Control Hump and Pedestrian Crossing.

Susumu Kumakura, Takeshi Kojima, Ken'ichi Maemori, 2001 .

651 On the Tightening Experiments of Flange Joint Assembly by Using Electric Impact Wrench

Hironao Takahashi, Susumu Kumakura, 2009 .

S1102-1-4 A Study Anti-Loosening Performance of Prevailing Torque Type Nuts under Repeated Tensile Loads

Susumu Kumakura, Ryo Sakakibara, Go Matunahga, 2009 .

S112033 Self-Loosening performance of Prevailing Torque Type Nuts under Repeated Tensile Loads : Thread Calkihg Method

Yusuke Sakai, Susumu Kumakura, Y. Sakai, 2011 .

608 Examinations of Tightening Sequence of Bolted Flange Connection

Susumu Kumakura, Yasumasa Shoji, Hirohiko Hosoya, 2005 .

319 Optimum Design of Shock Absorbers for Landing Gears of Aircraft

Reiko Koganei, Susumu Kumakura, Ken'ichi Maemori, 2001 .

319 軸方向外力を受けるねじ締結体の初期緩みについて(第4報) : はめあい長さの影響(機械要素・潤滑II)

Daisuke Saito, Susumu Kumakura, Ken'ichi Maemori, 2000 .

Experimental Study on Bolt Tightening Sequence of Flanged Joint Assembly : Influence of Inclination on Flange Joint Surface

Susumu Kumakura, Daisuke Yamada, Kumiko Saito, 2003 .