Borhen Louhichi

发表

Product Lifecycle Management. Towards Knowledge-Rich Enterprises

Louis Rivest, Abdelaziz Bouras, Borhen Louhichi, 2012, IFIP Advances in Information and Communication Technology.

A novel approach to the inspection of deformable bodies by adapting the coherent point drift algorithm and using a clustering methodology

Antoine Tahan, Borhen Louhichi, Mohamed Ali Mahjoub, 2019 .

Tool for generation of analysis models by simplification of CAD model

Abdelmajid Benamara, Mounir Hamdi, Nizar Aifaoui, 2013 .

A CAD Model for Tolerance Analysis of non-rigid Planar parts assemblies

Abdelmajid Benamara, Mehdi Tlija, Borhen Louhichi, 2018 .

A BIM-based method to plan indoor paths

Borhen Louhichi, Ahmed Hamieh, Aicha Ben Makhlouf, 2020 .

An approach of CAD/CAM data reuse for manufacturing cost estimation

Mehdi Tlija, Borhen Louhichi, Montasser Billah Letaief, 2020, Int. J. Comput. Integr. Manuf..

A CAD Assembly Management Model: Mates Reconciliation and Change Propagation

Benoît Eynard, Sébastien Remy, Borhen Louhichi, 2017 .

Choosing the Best Direction of Printing for Additive Manufacturing Process in Medical Applications Using a New Geometric Complexity Model Based on Part CAD Data

João Manuel R. S. Tavares, Antoine Tahan, Borhen Louhichi, 2019, VipIMAGE 2019.

CAD/CAE interoperability, an automatic generation of Analysis Model based on idealization of CAD geometry

Abdelmajid Benamara, Mounir Hamdi, Nizar Aifaoui, 2009 .

A Computer Aided Tolerancing (CAT) Tool of Non-rigid Cylindrical Parts Assemblies

Abdelmajid Benamara, Borhen Louhichi, Anis Korbi, 2019 .

Approach for CAD model Reconstruction from a deformed mesh

Borhen Louhichi, Mohamed Ali Mahjoub, Gérard Subsol, 2017, 2017 IEEE/ACS 14th International Conference on Computer Systems and Applications (AICCSA).

Intégration CAO/Calcul par reconstruction des modèles CAO à partir des résultats de calcul : Application à la simulation de la cinématique d'un assemblage

Abdelmajid Benamara, Borhen Louhichi, Vincent François, 2005 .

Integration of tolerances in the mechanical product process: Assembly with defects modelling.

Abdelmajid Benamara, Borhen Louhichi, Mehdi Tlija, 2013 .

Maintaining consistency between CAD elements in collaborative design using association management and propagation

Louis Rivest, Borhen Louhichi, L. Rivest, 2014, Comput. Ind..

CAD/CAE integration: updating the CAD model after a FEM analysis

Antoine Tahan, Borhen Louhichi, Gad N. Abenhaim, 2015 .

CAD/Tolerancing integration: mechanical system with geometric defects

Antoine Tahan, Borhen Louhichi, Mehdi Tlija, 2016 .

Proposition of a Geometric Complexity Model for Additive Manufacturing Process Based on CAD

Antoine Tahan, Borhen Louhichi, Sabrine Ben Amor, 2019, 2019 23rd International Conference Information Visualisation (IV).

A Review on Dynamic Stochastic Modeling of the Degradation Process: Case of Maintenance Based on Reliability and a Proposed Approach

Antoine Tahan, Borhen Louhichi, Mohamed Ali Mahjoub, 2020, Computación y Sistemas.

Management of Associations within Digital Mock-Ups for Improved Collaboration

Louis Rivest, Borhen Louhichi, 2012, PLM.

Reconstruction of a CAD model from the deformed mesh using B-spline surfaces

Borhen Louhichi, Mohamed Ali Mahjoub, Aicha Ben Makhlouf, 2019, Int. J. Comput. Integr. Manuf..

CAD Comparison Model For Data Reuse And Manufacturing Cost Estimation

Mehdi Tlija, Borhen Louhichi, Montasser Billah Letaief, 2018 .

Evaluation of the Algorithmic Error of New Specification Tools for an ISO 14405-1:2016 Size

Antoine Tahan, Borhen Louhichi, Ibtissem Jbira, 2018 .

Idealization of CAD model for a simulation by a finite element method

Abdelmajid Benamara, Mounir Hamdi, Nizar Aifaoui, 2010 .

An algorithm for CAD tolerancing integration: Generation of assembly configurations according to dimensional and geometrical tolerances

Abdelmajid Benamara, Souheil-Antoine Tahan, Mehdi Tlija, 2015, Comput. Aided Des..

Decision-Making Support in Engineering Design Based on Collaborative Dashboards: Integration of Business Intelligence Techniques

Benoît Eynard, Matthieu Bricogne, Magali Bosch-Mauchand, 2017 .

Fixtureless profile inspection of non-rigid parts

Hassan Radvar-Esfahlan, Borhen Louhichi, V. Sabri, 2013 .

Comparison between CAD models using modification ratio calculation

Guillaume Ducellier, Benoît Eynard, Borhen Louhichi, 2019, Int. J. Comput. Integr. Manuf..

Reproducibility Experimentation among Computer-Aided Inspection Software from a Single Point Cloud

Antoine Tahan, Borhen Louhichi, Mohamed Ali Mahjoub, 2019, J. Control. Sci. Eng..

Comparison between CAD models based on geometric information

Mehdi Tlija, Borhen Louhichi, Montasser Billah Letaief, 2017 .

A Novel Model for the Tolerancing of Nonrigid Part Assemblies in Computer Aided Design

Abdelmajid Benamara, Mehdi Tlija, Borhen Louhichi, 2019, J. Comput. Inf. Sci. Eng..

Simplification of CAD geometry using an hybrid method for efficient integration to FEM model

Abdelmajid Benamara, Mounir Hamdi, Nizar Aifaoui, 2010 .

IFIP Advances in Information and Communication Technology: Preface

Louis Rivest, Abdelaziz Bouras, Borhen Louhichi, 2012 .

A CAD Model for the Tolerancing of Non-rigid Parts Assemblies

Abdelmajid Benamara, Borhen Louhichi, Anis Korbi, 2019 .

Engineering Changes within A CAD Model: Analysis and Impact Prediction

Guillaume Ducellier, Borhen Louhichi, Benoit Eynard, 2018, Proceedings of CAD'18.

3D Object Retrieval Based on Similarity Calculation in 3D Computer Aided Design Systems

Benoît Eynard, Borhen Louhichi, Mohamed Ali Mahjoub, 2017, 2017 IEEE/ACS 14th International Conference on Computer Systems and Applications (AICCSA).

Reconstruction of the CAD Model using TPS Surface

Borhen Louhichi, Mohamed Ali Mahjoub, Aicha Ben Makhlouf, 2019, 2019 23rd International Conference Information Visualisation (IV).

Associations management and change propagation in the CAD assembly

Borhen Louhichi, Ameni Eltaief, Sebastien Remy, 2018, Comput. Ind..

Evaluating the effect of tolerances on the functional requirements of assemblies

Abdelmajid Benamara, Borhen Louhichi, Mehdi Tlija, 2013 .

An optimization-based computational method for surface fitting to update the geometric information of an existing B-Rep CAD model

Vincent François, Abdelmajid Benamara, Mounir Hamdi, 2009 .

A Comparative Study of Extraction Cylinder Features in Industrial Point Clouds

Antoine Tahan, Borhen Louhichi, Mohamed Ali Mahjoub, 2019, 2019 23rd International Conference Information Visualisation (IV).

A CAD model for the tolerancing of mechanical assemblies considering non-rigid joints between parts with defects

Mehdi Tlija, Borhen Louhichi, Anis Korbi, 2021, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.

A new approach for reusable 3D CAD objects detection, by similarity calculation based on Bayesian network models (BNM)

Borhen Louhichi, Mohamed Ali Mahjoub, Benoit Eynard, 2021, International Journal of Computer Integrated Manufacturing.

Approach for CAD model reconstruction basing on 3D points insertion and surface approximation

Borhen Louhichi, Nessrine Elloumi, Aicha Ben Makhlouf, 2021, 2021 25th International Conference Information Visualisation (IV).